Request For Quotation Device For Remote Puncture Of Cable-Dpk. Cable Cutting Tool Ksp-50 in Kazakhstan

Work Detail

Device For Remote Puncture Of Cable-Dpk. Designed To Indicate The Absence Of Voltage On A 0.4-10 Kv Electrical Cable Being Repaired, Before Cutting It By Piercing The Cable Along The Diameter And Short-Circuiting All Cores Of Different Phases To Each Other And To The Ground, In Order To Prevent The Possibility Of Injury To Personnel By Electric Current And Electric Arc. The Electrical Cable Is Pierced By A Punch Driven By The Pressure Of The Powder Gases. As An Energy Source, Mounting Cartridges Of 6.9Mm Caliber Of Group D4 According To Tu 3-795-85 With A Powder Charge Energy Of At Least 1100 J Are Used. Technical Characteristics: Outer Diameter Of Pierced Cables, [Mm] (Section Up To 240 Mm2) 25... 65. Dimensions Of The Case, [Mm] 355X324x83. Overall Dimensions Of The Grounding Pin, [Mm] - 11X610. Weight Of The Device In The Case Without Grounding Pin, [Kg] - 8.3. Device Weight, [Kg] - 4.8. Dimensions Of The Device, [Mm] - 136X70x350. Composition Of The Udpc; 1. Wpc Device (Assembled Product) 1 Pc. 2 Metal Case 1 Pc. 3. Punch 3 Pcs. 4. Combat Spring 2 Pcs. 5. Bobbin With Cord 1 Pc. 6. Grounding Pin 1 Pc. 7. Copper Ground Wire 1Pc. 8. Chamber M 1 Pc. 9. Chamber C 1 Pc. 10. Piston Ring 3 Pcs. 11. Extractor For Removing Spent Cartridges 1 Pc. 12. Ruff 1 Pc. 13. Oil Can 1 Pc. The Supplier Must Provide A Quality Certificate, Cable Cutting Tool Ksp-50 Is A Tool For Cutting Cables Made Of Cross-Linked Polyethylene (Xpe): Removes The Insulation And Semi-Conductive Layer When Installing Cable Joints. Designed For Cables With A Diameter Of Up To 50 Mm. The Supplier Must Provide A Quality Certificate

Contact Information