Tenders Are Invited For Construction Of Lighting On The District Road No. 2018L In The Town Of Łuszczów Kolo ... in Poland

Work Detail

1. The Subject Of The Order Is: Construction Of Lighting On The District Road No. 2018L In The Town Of Łuszczów Kolonia. 2. The Planned Scope Of Works Includes: 1) Construction Of Lighting On The Section From S24 To S33 (According To The Markings From The Technical Design) With A Length Of 439 M And 9 Lamps. As Part Of The Task Being Carried Out, The Scope From Lighthouse No. S33 To S 37 Included In The Design Documentation Will Not Be Implemented.2) A Yaky 4X25 Mm2 Cable Line Was Designed, Galvanized Steel Conical Lighting Poles With A Height Of 8 M, 9 Pcs. The Poles Were To Be Placed On Prefabricated Concrete Foundations Type F150/200, Galvanized Arc Booms 2.0 M High Were Designed. M Pcs. 9. Led Lighting Fixtures 33W Pcs. 9.3 Should Be Installed On The Booms Of 8 M Poles. A Detailed Description Of The Order Is Included In: Construction And Executive Design, Draft Contract, Bill Of Quantities Constituting The Information Basis.4. Due To The Modernization Of Lighting Carried Out By The Łęczna Commune And The Implementation Of A Lighting Management System, The Contractor Is Obliged To Include In The Submitted Offer External Devices - Gateways And Controllers In The Zhaga D4i Standard Installed In Each Luminaire And Communicating With The Gateway (The Cost Of The Subscription For Access To The System For The Entire Warranty Period Should Be Taken Into Account) - These Assumptions Were Not Included In The Construction Design. The Information Necessary To Select The Types Of Luminaires Can Be Found In The Tender Procedure No. Irg.271.21.17.2025 Https://Um-Leczna.Ezaniąjacy.Pl/Pn/Um-Leczna/Demand/Notice/Public/196864/Details5. If The Manufacturers Names, Trademarks, Standards, Approvals, Technical Specifications And Reference Systems Appear In The Swz Or Any Annex To The Swz, The Products May Be Replaced By Equivalent Ones. The Ordering Party Will Consider Equivalent Solutions To Be Solutions That Make It Possible To Achieve The Effect Intended By The Ordering Party Using Other Technical Solutions. An Identical (Identical) Solution Cannot Be Considered An Equivalent Solution, But Only One That Shows Exactly The Same Or Very Similar Utility Value In The Compared Features. By Indicating The Manufacturers Name, Trademarks, Standards, Approvals Or Reference Systems, The Ordering Party Aimed To Determine The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only The Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Publicly Available Sources, Catalogues, Manufacturers Websites, Etc. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of The Ordering Partys Expectations In Relation To A Specific Solution.6. The Contractors Obligations Related To The Performance Of The Subject Of The Order

Contact Information