|
I. The Subject Of This Order Includes The Following: 1. Demolition, Disassembly And Preparatory Works - Securing The Area For The Duration Of Construction, Securing Existing Access Roads Against Destruction, Dismantling Existing Sports Equipment - Two Basketball Stands With Sleeves, Ball Nets And Fences, Demolition Of The Existing Pitch Surface, Demolition Of Existing Lighting Fixtures, Cleaning And Unblocking Linear Drainage, Reconnaissance And Determination Of The Route Existing Technical Infrastructure And Protection For The Duration Of Construction Works, 2. Modernization Of The Polyurethane Pitch - Landscaping, Profiling And Compacting The Subsoil, Supplementing The Foundation, Installation Of An Epdm Sports Surface, Painting The Pitch Lines, Installation Of Foundations For Equipment, Installation Of Multi-Purpose Pitch Elements (Adjustable Posts, Sleeves, Stands, Goals), Installation Of New Knotless Polypropylene Nets. A) Modernization Of A 20X32 M Basketball Sports Pitch With An Epdm Polyurethane Surface - After Demolishing The Existing Pitch Surface, The Substructure Should Be Leveled And Then A New Brick-Red And Green Spray-Type Polyurethane Surface Should Be Laid In Accordance With The Land Development Design. Construction Layers: - Et Type, Thick. 35 Mm, Made Of A Mixture Of Polyurethane Resin, Sbr Granulate, Washed Aggregate, Water-Impermeable Polyurethane Surface, Intended For Laying On Concrete, Asphalt Concrete And Mineral Base. - Flexible Intermediate Layer, Thickness Approx. 11 Mm (Sbr Granules 1 – 4 Mm With Polyurethane Binder). - Putty Layer Impermeable To Water. - Outer Wear Layer, Sprayed, Thick. 2 Mm, Epdm Granules From Primary Production. - Painting Lines Marking The Playing Fields Of Volleyball And Basketball Courts. The Required Minimum Parameters Of The Polyurethane Surface Are Specified In The Land Development Design. Equipment: - Volleyball Set - Professional Aluminum Volleyball Posts With Sleeves Mounted In A Concrete Foundation, Net. - Basketball Set With A Goal - Goals Consisting Of A Frame (Stringers And Posts) In Accordance With Fifa Regulations And A Basket With An Anti-Vandal Board Made Of Perforated Sheet Metal With Dimensions Consistent With The Game Of Basketball. Installation Of Goals By Anchoring The Structure To The Ground. The Basketball Backboard Is Made Using Technology That Maintains Its Functionality And At The Same Time Reduces The Noise Of The Bouncing Ball. Basketball Net Made Of Plastic. B) Fence - Installation Of A 4 M High Barrier Net Around The Pitch: - Installation Of A Polypropylene Net With Dimensions 10X10 Cm Knotless Mesh With Tension, Attached To The Posts Using System Connectors, Green Mesh - Assembly Of 4 Steel Cables Stretched With Turnbuckles, Stretched In The Upper, Lower And Middle Parts Of The Fence, Attached To The Fence Posts Every 2 M, At The Height Of The Ball Catch. Galvanized Steel Cable With Pvc Coating. System Connectors. - Cleaning, Priming And Painting The Entrance Gate A
|
