|
Network Cable Utp Cat 6 Cable Must Be At Least Cat 6 Compliant 4 Twisted Pair Cores Each Core Must Be At Least 23 Awg Size Outer Sheath Must Be Pvc Or Lszh Type Cable Must Be Intended For Indoor Use Insulation And Construction Must Comply With Tia/Eia-568 And Iso/Iec 11801 Standards Must Support 10Base-T, 100Base-Tx And 1000Base-T Ethernet Standards Delivery, Installation, Tuning, Commissioning Costs Should Be Included., The Cable Must Be At Least Utp Cat 6A. It Must Consist Of 4 Pairs (8 Cores) Of Twisted Copper. Each Core Must Be At Least 23 Awg In Size. The Core Material Must Be 100% Copper (Cu). The Outer Sheath Must Be Pvc Or Lszh. Delivery, Commissioning, Commissioning Should Be Included In The Cost., Plastic Channel For Cable 40X25 Mm Designed For The Laying And Protection Of Network Cables, Cable Channel Made Of Pvc Material, Rectangular Shape, Size 40X25 Mm, Material Should Be Made Of Polyvinyl Chloride (Pvc) Or An Equivalent Strong Dielectric Material, Color Should Be White Or Light Colored, Should Have A Lid Construction, The Cover Should Fit Firmly On The Trunk Body And Allow Easy Opening And Closing, It Should Be Suitable For Indoor Use, Mechanical It Should Protect The Cable From Damage And External Influences. It Should Be Suitable For Mounting On Walls And Other Surfaces. Delivery, The Rj-45 Connector Header Should Be Suitable For Utp Cat 6 Cable.It Should Have 8P8c Type Construction., Fiber-Optic Drop Cable With Steel Wire For Outdoor Use. The Cable Must Consist Of At Least 2 Optical Fibers. The Fiber Type Must Be Single Mode. The Carrier Must Have A Steel Wire Construction. The Outer Coating Must Be Resistant To Uv, Humidity And Atmospheric Effects. Delivery, Commissioning Costs Shall Be Included. Intended For Use In Telecommunications And Data Transmission Networks., Wall-Mounted Rj-45 Network Socket Must Be Compatible With Utp Cat 5E/Cat 6 Cable Must Have 1 Rj-45 Port Must Be Designed For Wall Mounting Must Have Idc Type Cable Termination Mechanism Must Support 100/1000 Mbps Ethernet Connection Body Must Be Made Of Plastic Material Must Be White Or Light In Color. Delivery, Type: Rj-45 (8P8c) Modular Connector. Standard: Full Compatibility With Utp Cat 6A (Or Higher) Network Infrastructure. Core Compatibility: Must Be Able To Work With 23 Awg Or 24 Awg Copper Cores. Performance: Must Support 10Gbase-T (10 Gigabit Ethernet) And 500 Mhz Frequency Band. Contacts. Compliance: Must Meet International Standards Tia/Eia-568.2-D And Iso/Iec 11801. Construction: Housing With Durable Polycarbonate Or Metal Shield (To Be Selected According To Project Requirement). Certification: Product Must Be Certified To Cat 6A Component Level By Independent Laboratories (Ul, Etl Or Equivalent) Or Have Declaration Of Conformity. Standards: Must Meet Rohs And Ce Requirements. Delivery, Commissioning And Commissioning Costs Should Be Included In The Price., The Fiber-Optic Termination Cassette Should Be Designed For A Minimum Of 2 Fibers. It Should Be Compatible With Single Mode Fiber Cable. It Should Be Possible To Use With Sc Or Lc Adapters. Delivery, Odf Fiber-Optic Termination Panel Should Be Suitable For 1U Rack Mounting, Should Have At Least 8 Ports, Should Be Suitable For Single Mode Fiber Cable, Should Be Equipped With Sc Or Lc Adapters, Should Be Installed In A 19 Rack Cabinet, Should Be Designed For Fiber Protection And Neat Termination, Should Have Cable Entries And Fiber Cassette, Should Be Suitable For Telecommunication And Lan Optical Connections. Delivery, Optical Patch Cord Min. 1 Meter Must Be Presented According To The Requirement Of Single Mode Or Multi Mode Must Be Suitable For Lc-Lc, Sc-Lc Or Required Connector Type Must Be Factory Terminated Must Have Low Signal Loss Must Be Suitable For Optical Distribution Panel, Sfp Module And Media Converter Connection Must Be Intended For Internal Use. Delivery, Cabinet For Network Equipment Rack 6U 600X450 It Should Be A Wall-Type Metal Rack Cabinet Designed For The Placement, Protection And Neat Assembly Of Network Equipment. The Useful Height Of The Cabinet Should Be At Least 6U. The Cabinet Should Be Suitable For 19-Inch Standard Rack Equipment. Its Dimensions Should Be Approximately 600X450 Mm. It Should Have A Construction Suitable For Wall Mounting. Should Be In Construction. Delivery, Adjustment, Commissioning Should Be Included In The Cost. The Door Should Have A Lockable Or Safety Closing Mechanism. There Should Be A Minimum Of 2 19-Inch Mounting Rails Inside., Cabinet For Network Equipment Rack 9U 600X450 It Should Be A Wall-Type Metal Rack Cabinet Designed For The Placement, Protection And Neat Assembly Of Network Equipment. The Useful Height Of The Cabinet Should Be At Least 9U. The Cabinet Should Be Suitable For 19-Inch Standard Rack Equipment. Its Dimensions Should Be Approximately 600X450 Mm. It Should Have A Structure Suitable For Wall Mounting. Should Be Delivery, Electric Cable 3X2.5 Mm² Pvc-Coated It Should Be A Pvc-Coated, Multi-Core Electric Cable Designed For The Transmission Of Electric Power And The Connection Of Electrical Equipment. The Cable Should Be 3-Core. The Cross-Section Of Each Core Should Be At Least 2.5 Mm². The Conductor Material Should Be Copper. It Should Be Suitable For Internal Stationary Assembly. It Should Be Resistant To Mechanical Effects And Normal Operating Conditions. Coloring And Core Marking Should Allow Differentiation Of Phase, Neutral And Grounding Lines. Delivery, General Specification Of 3X10 Mm² Pvc Sheathed Power Cable: Cable Type: 3-Core, 10 Mm² Copper Wire Power Cable (Nym Or Vvg Standard); Nominal Voltage: 0.6/1 Kv; Insulation And External Coating Material: Pvc (Polyvinyl Chloride); Core Material: Soft Copper (Multi-Wire Or Single-Wire); Working Temperature: -15°C To +70°C; Permissible Current Load: ~50-60A (Depending On Environmental Conditions); Delivery, The 6-Outlet Power Distribution Unit Must Be Suitable For Installation In 19-Inch Rack Cabinets. It Must Have A Minimum Of 6 Schuko (Type F) Outlets. The Operating Voltage Must Be 220-240V Ac. It Must Support A Minimum Current Load Of 16A. The Maximum Power Load Must Be At Least 3500W. Must Have An Overload Protection Function. Must Work In The 50/60 Hz Frequency Range. Must Comply With Ce And Rohs Standards. Delivery
|
