Tenders Are Invited For Reconstruction Of The Municipal Road In The Town Of Czerno in Poland

Work Detail

1. As Part Of The Investment, It Is Planned To Reconstruct The Municipal Road By Replacing The Structural Layers Of The Road And Shoulder. The Length Of The Reconstructed Road Section Is 318.60 M. The Reconstructed Road Section Is Designed With A Road Cross-Section As A Two-Way Single Carriageway With A Width Of 3.5 - 5.0 M With A 5.0 M Wide Passing Road On The Section Hm 0+74.30 - 0+95.30 And A Local Narrowing Up To 3.0 M With A Bituminous Surface With A Hardened Shoulder 0.5 M Wide Made Of Made Of Crushed Aggregate 15 Cm. The Designed Road And The Area Around The Communication Route In Question Should Be Profiled Strictly In Line With The Existing Land Development, Both In Terms Of Situation And Height. The Designed Road Surface Will Have A One-Sided Transverse Slope Of 2%, Adapted To The Existing Land Development. The Transverse Slope At The Height Of The Beginning And End Of The Development Of This Section Should Be Strictly Related To The Existing Terrain In Terms Of Situation And Height. The End Of The Development Of This Section Should Be Limited By Placing Concrete Ramp Curbs 22X15x100 Cm, Placed On A Concrete Footing With Resistance, Made In Formwork (C12/15 Concrete), Flush With The Designed Road Surface. Moreover, The Existing Telecommunications Network Along The Length Of The Rebuilt Section Should Be Secured By Laying A Two-Part Arot Pipe, 160 Mm In Diameter. Additionally, As Part Of The Investment, It Is Planned To Possibly Cut Down Shrubs That Do Not Require An Additional Cutting Permit Due To The Possible Area To Be Cut Down. Parameters Of The Rebuilt Municipal Road: • Road Technical Class: D, • Traffic Category: Kr2, • Design Speed: 30 Km/H, • Road Width: 3.00 – 4.50 M, • Side Width: 0.5 M, • Cross Road Inclination: One-Sided 2%

Contact Information