|
Name Purchases: Adapter With Locking Thread. Lot Description: Sublator Additional Lot Description: The Sub Is A Pipe Made Of High-Strength Alloy Steel, The Upper And Lower Ends Of Which End With Locking Threads. The Sub Is Equipped With Flushing Liquid. Dimensions Internal 66Mm / External 118 Became 40X. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Tool Joint Subs For Drill Strings Are Designed To Connect Individual Parts Of A Drill String Or Attach To It Tools With Tool Joint Threads Of Different Types And Sizes During Drilling And Repair Work. Gost 28478. The Product Must Be New, Not Previously Used., Name Of Purchase: Piston Size F-110 Mm Nb-32 Lot Description: Piston Additional Description Of The Lot: Cylinder Liner Diameter 110 Mm. It Consists Of A Steel Core And One Or Two Removable Or Vulcanized Rubber Cuffs On Both Sides. Description And Required Functional, Technical, Quality And Performance Characteristics Of The Purchased Goods: The Piston Is A Cylindrical Part That Performs Reciprocating Movements Inside The Cylinder And Serves To Convert Changes In Gas Pressure Into Mechanical Work Or Vice Versa. Piston Size F-110 Mm, Nb -32, Gost 18698-79. The Product Must Be New And Not Previously Used., Name Purchases: Open-End Drill Wrench D-76 Mm Lot Description: Sublator Additional Lot Description: Type – Open-End Drill Wrench Working Part Material – Alloy Steel Length, Mm - 535, Weight, Kg - 8.7. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Open-End Drill Wrench D-76Mm Is A Tool For Gripping And Rotating Drill Pipes, Couplings And Other Elements Of The Drill String With A Diameter Of About 76 Mm. It Is Used For Hoisting And Installation Work In Drilling. Article Mz-73.000, Pipe Diameter, Mm - 89, Length, Mm - 535, Gost 18981-73. The Product Must Be New And Not Previously Used., Pressure Gauge Mp4u 0-40Mpa. Nb-32. Mp4u. Measuring Range 0-40 Mpa. Case Diameter -160 Mm (Large, Easy To Read). Pressure Gauge Mp4u 0-40Mpa. Nb-32. A Standard General-Purpose Pointer Pressure Gauge, Which Is Often Installed On Drilling Pumps And Pumping Units Of The Nb-32 Type, Protecting Equipment From Overload And Monitoring The Well Flushing Regime. Pressure Gauge Mp4u 0-40Mpa, Nb-32, Gost 12.2.003-91., Piston Rod Nb 32-02-501, Material Steel 40X, Length 565 Mm, Diameter 44 Mm, Weight 4.5-5.5 Kg. Piston Rod Nb 32-02-501 Is A Part Of The Hydraulic Part Of An Nb-50 Type Mud Pump, Which Transmits Reciprocating Motion From The Drive Mechanism To The Piston And Creates Pressure In The Cylinder Liner. Piston Rod Nb 32-02-501. Gost 1284.2-80. The Product Must Be New And Not Previously Used., Name Purchases: Drilling Fluid Xtraseal Nhreadljcker 9243. - Density: * For Oil-Based Solutions – 890-980 Kg/M3 * For Low-Clay Solutions – 1050-1060 Kg/M3 * For Weighted Drilling Fluids – 2200 Kg/M3 Or More - Barium Sulfate Content – 80-90% - Pyrite Content – Less Than 6% - Content Of Water-Soluble Salts – 0.35-0.45% - Fraction Of 5 Microns Fraction - 10-20% - Humidity Up To 2%. Strengthens Well Walls Consisting Of Unstable Rocks. The Solution Cools The Equipment And Cleans The Instrument From Impurities That Fall On It. Gost 5696-95. The Product Must Be New And Not Previously Used., Cuffs 85-95-6 Ush Nbr Rubber. Inner Diameter -85 Mm, Outer Diameter -95 Mm, Height (Thickness) - 6 Mm. Ush – Cuff Profile Type (Double-Lip Symmetrical Seal For Rod And Piston), Nbr Material Nitral Rubber (Oil-Resistant Rubber). Cuffs 85-95-6 Ush Nbr Are A Hydraulic Seal (Rod/Piston Seal) For Cylinders. Cuffs 85-95-6 Ush Nbr Rubber. Gost 8752-79. The Product Must Be New And Not Previously Used., Rotator Lift Hydraulic Cylinder. Installation Type Urb-2A2 Hydraulic Cylinder – 2-25-10-1. The Hydraulic Cylinder For Lifting The Rotator For The Urb-2A2 Drilling Rig Is A Hydraulic Cylinder That Moves The Rotator Up And Down The Mast Through The Tackle System. Used For Feeding Drilling Tools, Raising And Lowering The String During Drilling. Hydraulic Cylinder For Lifting The Rotator 2-25-10-1 To Urb-2A-2. Gost 147691. Hydraulic Cylinder 2-25-10-1 Is Certified In Accordance With The Requirements Of Regulatory Documentation, Including Eac Standards. Equipment; Hydraulic Cylinder 2-25-10-1 - 1 Pc. Sealing Elements; - Ring 60553.2 - 1 Piece. Ring 1201105.1 - 1 Pc. Piston Seal 1209522.4 - 1 Pc. Support Guide Ring 80-86-20 - 2 Pcs. Rod Seal 801006.3 - 1 Pc. Wiper 80958.5 - 1 Pc. Piston Stroke - 2640 Mm. Piston Diameter - 120 Mm. Rod Diameter - 80 Mm. The Product Must Be New And Not Previously Used., Name Purchases: Ball Valve Seat Nb 32-02-85 Lot Description: Valve Additional Lot Description: Ball Valve Type. Ball Diameter 50 Mm. Material: Alloy Steel With Heat Transfer. Application Of Pumps Nb-32. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Ball Valve Seat Nb 32-02-85 Is A Spare Part For The Nb-32 Mud Pump That Works Together With A 50 Mm Diameter Ball In The Ball Valve. For Supplying Flushing Fluid In Drilling Rigs Per Pump - 64 Pieces. Ball Valve Seat Nb 32 -02-85. Gost 7524. The Product Must Be New And Not Previously Used., Name Purchases: Rem. Mast Lift Cylinder Kit, Assembled Urb-2A-2 Lot Description: Rem. Kit Additional Lot Description: Set: Rod Seal, Piston Seal, Wiper, Guide Support Rings, Rubber Sealing Rings, Fluoroplastic Protective Rings. Piston Diameter 120 Mm, Rod Diameter 80 Mm. Load Capacity Of The Mast – 6000. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Rep. Mast Lift Cylinder Kit, Assembled Urb-2A-2 Set Of Sealing And Auxiliary Parts For Repairing The Hydraulic Cylinder That Lifts The Mast Of The Drilling Rig. Mast Lift Cylinder Repair Kit, Assembled Urb-2A-2, Gost 9833-73. The Product Must Be New And Not Previously Used., Name Purchases: Pbb Sub-Drill Fork 3-50 Mm Lot Description: Drill Fork Additional Lot Description: Weight 7-9 Kg, Cast Steel, Expanding Mouth For Self-Centering, Long Handle For Holding The Pbv 3-50 Mm Drill Fork Is An Auxiliary Drilling Tool That Is Used When Working With A Drill String. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Drill Fork - A Metal Fork With A Handle That Is Installed At The Wellhead, Holds And Fixes The Drill String During Extension Or Lifting. Backing Fork, Drilling Pbb 3-50 Mm. Gost 3668-2015. The Product Must Be New And Not Previously Used., Universal Drilling Tap Mbu 42-85 Pr/L. Connecting Thread According To Gost 28487-90 – 3-88. External Diameter, Mm – 108. Length, Mm – 955. Weight, Kg – 2. The Mbu Universal Drilling Tap Is Designed For Capturing And Subsequent Removal Of The Drill String Remaining In The Well By Cutting Into The Smooth Inner Surface Of The Pipes. Tap Mbu 45-85 Pr/L. Gost 16350-80. The Product Must Be New And Not Previously Used., Name Purchases: Adapter With Locking Thread. Lot Description: Sublator Additional Lot Description: The Sub Is A Pipe Made Of High-Strength Alloy Steel, The Upper And Lower Ends Of Which End With Locking Threads. The Sub Is Equipped With Flushing Liquid. Dimensions Internal 50 Mm / External 66 Steel 40X. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Tool Joint Subs For Drill Strings Are Designed For Interconnecting Individual Parts Of A Drill String Or Attaching To It Tools With Tool Joint Threads Of Different Types And Sizes During Drilling And Repair Work. Gost 7360-82. The Product Must Be New And Not Previously Used., Clamp For Ubt Pipe Wa-C. The Wa-C Safety Clamp Is Used For Pipes With An Outer Diameter Of 3 ½ - 155/8 Inches (88.9-396.9 Mm) Number Of Links 7-18. Quantity: 4 Pcs (127-178 Mm) Drilling Safety Clamp Wa-C Is A Simple, But Very Effective And Extremely Necessary Auxiliary Manual Mechanical Safety Device Used When Drilling Gas Or Oil Wells When Installing Or Dismantling A Pipe. The Wa-C Series Model Is Directly Used To Work With Pipes From 3 1/2 To 15 5/8 Inches, That Is, 88.9...396.9 Mm. Gost 127178. The Product Must Be New, Not Previously Used., Name Purchases: Universal Pipe Chain Wrench Wa 36 Lot Description: Sublator Additional Lot Description: Type – Chain Working Part Material – Hardened Steel Length – 832 Mm Maximum Coverage – 180-185 Mm Weight – 7.5 Kg. Description And Required Functional, Technical, Quality And Operational Characteristics Purchased Goods: Designed For Use In Harsh Conditions. The Chain Is Made Of Hardened Steel, Which Ensures Reliable And Quick Gripping Of Pipes. Article 02070 Model Reed Wa36 Pipe Diameter 21 - 127 Mm 1/2 - 5 Maximum Pipe Diameter 180 Mm (7.1) Chain Breaking Load 6.51 Kg Length 832 Mm (33) Weight 7.5 Kg. Gost Sat70804. The Product Must Be New And Not Previously Used.
|
