|
Saw Blade For Wood 300*32 Wood Saw Blade For Stationary Power Tools, Diameter 300 Mm. Landing (Internal) Hole With A Diameter Of 32 Mm. The Cutting Width (Disc Thickness) Is Not Less Than 3.0 Mm And Not More Than 3.5 Mm. Manufacturing Material: High-Alloy Tool Steel. The Number Of Teeth Is No Less Than 48 And No More Than 60 Pieces. Tooth Geometry - Set For Rip And Cross Cuts, Equipped With Carbide Tips (Win) For Increased Service Life When Cutting Both Soft And Hard Wood. The Disk Must Have Compensation Slots (Slots) To Reduce Thermal Deformation And Noise During Operation, As Well As Markings Indicating The Maximum Permissible Rotation Speed. The Packaging Must Provide Protection For The Cutting Edge (Cardboard Box Or Plastic Case). Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Belt For Benchtop Disc Belt Sander Toothed Synchronous Drive Belt For Tabletop Disc-Belt Sanding Machine, Designed To Transmit Torque From The Motor To The Drive Roller Of The Sanding Belt. Belt Profile Type - Toothed (Synchronous), Xl Standard. Number Of Teeth - 100. Belt Length Along The Internal Contour (Calculated) - 508 Mm (20 Inches). Belt Width: 9.5 Mm (Tolerance ±0.5 Mm). The Material Used Is Neoprene Rubber With Reinforcing Cord, Resistant To Dynamic Loads And Wear. A Mandatory Requirement Is The Presence Of The Factory Marking “200Xl” On The Outer Surface Of The Belt To Confirm Compliance With The Geometric Parameters. Supplied In Individual Protective Packaging To Prevent Kinks, Creases And Damage To The Tooth Profile. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Saw Blade For Wood 350*32 Wood Saw Blade For Cross-Cutting Or Stationary Circular Saw, Diameter 350 Mm. Landing (Internal) Hole With A Diameter Of 32 Mm. The Cutting Width (Disc Thickness) Is Not Less Than 3.2 Mm And Not More Than 3.8 Mm. Manufacturing Material: High-Alloy Tool Steel. The Number Of Teeth Is No Less Than 60 And No More Than 72 Pieces. Tooth Geometry - Carbide-Tipped For Clean And Fast Cutting Of Hard And Soft Woods, As Well As Chipboard/Mdf. The Presence Of Compensation Slots To Prevent Overheating And Deformation Of The Canvas Is Mandatory. The Disk Must Be Statically And Dynamically Balanced And Have A Safe Rotation Speed (Rpm) Marked On The Housing. Supplied In Rigid Packaging To Prevent Damage To The Soldering During Storage And Transportation. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Set Of Saw Blades For Jigsaw Set (5 Pcs) A Set Of Replacement Saw Blades Bosch T101ao For An Electric Jigsaw With A T-Shank, Designed For High-Precision Straight (Straight) And Curved (Curved) Cuts Of Soft And Hard Wood, Plywood, Chipboard And Mdf. The Material Used Is High-Quality Carbon Steel (Hcs), Which Provides High Elasticity And Flexibility Necessary For Making Sharp Turns Without Breaking The Blade, As Well As Exceptional Cleanliness Of The Cut. The Total Length Of The Blade Is At Least 100 Mm, The Working Length Of The Toothed Part Is At Least 74 Mm. The Tooth Pitch Is Fine, With An Index Of At Least 20 Tpi (20 Teeth Per Inch), Which Guarantees A Thin, Accurate Cut With Minimal Chipping On The Face Surfaces. The Maximum Depth Of Cut In Wood Is From 15 To 50 Mm. The Type Of Sharpening Of The Teeth Is A Fine Setting, Aimed At Shaped Cutting While Maintaining Ideal Evenness Of The Edges. The Packaging Should Be Made In The Form Of A Hard Blister Or Cardboard Backing That Prevents Damage To The Sharpened Teeth. The Number Of Files In The Set Is At Least 5 (Five) Pieces. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Alteco Cd Cordless Drill; Battery Voltage 38 W. Maxim. Number Of Revolutions 1700; Presence Of Reverse; Power - 4 A; Spare Battery. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Manual Starting Starter Assembly For A Petrol Trimmer (Motor Cutter) Of The Stihl Brand Professional Series, Designed To Drive The Engine Flywheel. The Product Is An Original Replacement Spare Part (Oem Spare Part) And Fully Complies With The Factory Geometric Parameters, Seats And Mounting Holes For Installation On The Crankcase Of Stihl Gasoline Engines With A Volume Of 30 To 40 Cc (Including Models Fs 111, Fs 131 And Their Analogues). Structurally, The Starter Is Made In The Form Of A Single Assembly, Including A High-Strength Plastic Housing-Cover Made Of Impact-Resistant Polymer, An Internal Rotating Bobbin With A Reinforced Return Spiral Spring, A Wear-Resistant Nylon Starting Cord With Factory Markings, As Well As An Ergonomic Plastic Handle With An Increased Finger Rest. The Internal Ratchet Mechanism (Centrifugal Pawl) Provides Reliable And Instant Engagement With The Flywheel When Jerking And Automatically Disengages After Starting. The Starter Is Equipped With A Patented Ergostart Lightweight Starting System (Or Its Full Analogue), Which Reduces The Tension On The Cord And Prevents Sharp Reverse Impacts On The Operator’S Hand. The Starter Housing Has Precision Mounting Holes For Standard Stihl Mounting Bolts. The Product Is Delivered In Original Factory Packaging With Company Logos And Barcodes, Completely Ready For Installation. The Warranty Period For The Original Spare Part Is At Least 12 Months. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Two-Handed Telescopic Lopper Product Name: Gardena Two-Handed Telescopic Lopper Technical Characteristics: Type - Two-Handed Telescopic Lopper; Purpose - For Pruning Fresh And Dry Branches Of Trees And Shrubs; Cut Type - Bypass (Bypass); Maximum Cutting Diameter - At Least 50 Mm; Tool Length – Adjustable From 520 Mm To 670 Mm; Blade Material: High-Quality Hardened Steel With Precision Sharpening And Anti-Friction Coating; Handle Material - Aluminum; Telescopic Handles With A Reliable Fixation System; Ergonomic Anti-Slip Pads Are A Must; The Presence Of Shock Absorbers To Reduce The Shock Load On The Hands Is Mandatory; Weight - No More Than 1.2 Kg; The Design Provides A Clean And Precise Cut Without Significant Effort. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Manual Vertical Electric Router Type – Manual Vertical Electric Router Makute Tr001. Power Consumption – 580 W. The Maximum Spindle Speed Is 30,000 Rpm. Collet Size – 6 Mm. The Maximum Milling Depth Is 40 Mm. Designed For Processing Wood, Plastic And Similar Materials. Adjustment Of Milling Depth. Power Supply – 220–240 V, 50 Hz. Additional Requirements: - The Product Must Be New, Not Used, And Supplied In Full Working Order. - The Warranty Period For Manufacturing Defects Must Be At Least 12 Months From The Date Of Acceptance Of The Goods By The Customer. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., A Set Of Replaceable Woodworking Cutters For A Manual Electric Router, With A Landing Shank Diameter Of Strictly 8 Mm A Set Of Replaceable Woodworking Cutters For A Manual Or Stationary Electric Router, With A Landing Shank Diameter Of Strictly 8 Mm. The Total Number Of Cutters In The Set Is At Least 12 Pieces. The Cutting Part Of Each Cutter Must Be Equipped With Carbide Tipped Tungsten Carbide (Industrial Alloy Vk8 Or Similar In Hardness), Providing High Wear Resistance And Resistance To Chipping When Processing Hardwood, Chipboard And High-Density Mdf. The Cutter Shank Must Be Made Of High-Alloy Tool Steel Containing Chromium, Thermally Hardened To A Hardness Of At Least Hrc 45, Which Guarantees Tight, Backlash-Free Fixation In The Collet Chuck And Eliminates Runout At Operating Speeds Of Up To 30,000 Rpm. The Set Should Include Various Profiles For Complex Carpentry Work: Straight Grooves, Fillet Edges (With A Radius Rounding), V-Shaped, Rebated, Copying With A Support Ball Bearing, As Well As Profile Cutters For The Tongue-And-Groove Connection. All Tools Must Be Supplied In A Hard, Impact-Resistant Plastic Organizer Case With Individual Holders And Clamps To Prevent Contact Between The Cutting Edges. The Delivery Set Includes Two Open-End Wrenches For Fixing The Spindle When Replacing Equipment. The Presence Of Factory Markings Of Alloy Or Hardness On The Surface Of Cutters Is Welcomed As Confirmation Of Quality. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Gasoline Generator With A Power Of 3.3 Kw; Type Of Fuel - Gasoline; Voltage 220W; Fuel Tank Volume - 16 L; On Wheels. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Manual Starter Assembly For Petrol Chain Saws Manual Starter Assembly For Petrol Chainsaws With Engine Capacity From 40 To 55 Cubic Centimeters, Designed To Drive The Crankshaft Via A Centrifugal Clutch. The Starter Is A Ready-To-Install Unit That Includes: An Outer Plastic Case (Crankcase Cover) With Holes For Mounting Bolts, An Internal Bobbin (Reel) With A Return Spiral Spring, A Starting Cord At Least 800 Mm Long, A Handle For Gripping By Hand, As Well As A Ratchet Mechanism (Pawl) For Engaging The Clutch Drum. The Starter Housing Must Be Made Of Impact-Resistant Abs Plastic, Resistant To Mechanical Stress And Overheating. The Cord Must Be Braided With Wear-Resistant Nylon To Prevent Abrasion. The Handle Should Be Ergonomic, With A Non-Slip Coating. The Entire Assembly Assembly Must Be In Full Working Order, Filled With Lubricant And Ready For Immediate Installation On The Engine Without Additional Adjustment. Supplied In Individual Cardboard Or Polyethylene Packaging, Providing Protection From Damage During Transportation. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Belt For Thickness Planer Drive Poly-V (Multi-Ribbed) Belt For A Thickness Planer, Designed To Transmit Torque From The Electric Motor Pulley To The Knife Drum. The Belt Profile Is Poly-V-Ribbed Type Pj. The Number Of Longitudinal Ribs (Streams) Is At Least 3. The Estimated Length Of The Belt Along The Internal Contour Is 610 Mm (Permissible Deviation ±2 Mm). Belt Width: No Less Than 9.5 Mm And No More Than 10.5 Mm. The Material Used Is Wear-Resistant Rubber With A Polyester Reinforcing Cord, Providing Protection Against Stretching, Tearing And Slipping Under High Operating Loads. The Belt Must Be Resistant To Abrasive Wear And Temperature Changes. Supplied In Individual Protective Packaging To Prevent Bending And Deformation Of The Profile. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Petrol Hedge Trimmer Kedr 65001 (Hedge Trimmer) Of A Professional Type For Caring For Hedges, Shrubs And Trimming Branches In The Landscaping Of Parks And Squares. Engine Type - Two-Stroke Petrol, Air-Cooled, Displacement - At Least 25 Cm³. Engine Power - No Less Than 0.75 Kw (1.0 Hp). The Starting System Is A Manual Inertia Type Starter. Fuel Tank - With A Volume Of At Least 0.3 Liters, With A Lid That Prevents Fuel Leakage In Any Position Of The Tool. The Cutting Part Is A Double-Sided Steel Rod (Knife) With Hardened And Sharpened Teeth. The Length Of The Cutting Part (Active Cutting Zone) Is At Least 600 Mm (Or 550 Mm Depending On The Modification). The Maximum Diameter Of Branches To Be Cut Is At Least 20 Mm. The Maximum Stroke Frequency Of The Knives (Cutting Speed) Is At Least 3000 Strokes Per Minute. The Design Of The Handles Is Ergonomic (D-Shaped Front Handle And Ergonomic Rear Handle With A Gas Handle), With Anti-Vibration Protection And Rubberized Pads To Reduce The Load On The Operator’S Hands During Long-Term Operation. The Protective Cover Is Plastic, To Protect Hands From Branches And Fingers From Accidental Contact With The Knife. Contents: Brush Cutter Assembly, Protective Cover, Measuring Cup For Preparing The Fuel Mixture, Spark Plug Wrench, Set Of Screwdrivers And Adjustment Tools, Factory Instructions In Russian, Cardboard Packaging. The Warranty Period Is At Least 12 Months From The Date Of Delivery. The Product Must Be New And Not Used. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Replaceable Trimmer Head (Coil) Replacement Gardena Trimmer Head (Reel) For Gasoline And Electric Brush Cutters, Designed To Supply Cutting Nylon Fishing Line. The Head Is Made Of Impact-Resistant Plastic, Resistant To Ultraviolet Radiation And Mechanical Damage When Operating At High Speeds. The Central Part Is Equipped With A Metal Fixing Insert With An Internal Thread For A Standard Trimmer Spindle (M10x1.25 Or M12x1.25 Thread) And An External Wrench Nut For Reliable Fastening To The Shaft. The Design Provides A Semi-Automatic Line Feed System (Shock-Sensitive Mechanism): To Dispense The Line, It Is Enough To Hit The Head On The Ground At Idle, While The Reel Stopper Should Ensure Reliable Fixation Of The Line Without Arbitrary Unwinding And Tangling. The Head Has Double Outlet Holes For Working With Two Oppositely Located Pieces Of Fishing Line (Dual Threading). The Maximum Permissible Diameter Of The Threaded Fishing Line Is Up To 3.0 Mm. The Outlets Are Equipped With Wear-Resistant Bushings To Prevent The Nylon From Rubbing Against The Plastic. The Head Body Must Be Marked With The Direction Of Rotation (Arrow) And The Direction Of Winding The Line. Supplied Complete With The Housing Itself, An Internal Reel (Spool) For Winding Fishing Line, A Metal Nut And A Spring Assembly, Completely Ready For Installation. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Line For Petrol And Electric Trimmers Cutting Line For Petrol And Electric Trimmers (Strimmers) With A Star-Shaped Cross-Section (Hexagonal). The Diameter Of The Line Along The Edges Is 3.0 Mm (Permissible Deviation ±0.1 Mm). The Line Is Made Of High-Strength Nylon With Increased Rigidity, Designed For Mowing Tough Weeds, Weeds, Reeds And Small Bushes. The Angular Shape Of The Section Provides A Vegetation-Cleaving Effect, Significantly Increasing Productivity Compared To Round Fishing Line. The Length Of The Fishing Line In One Coil (Skein) Is At Least 15 Meters. The Packaging Must Provide Reliable Fixation Of The Skein And Protect It From Damage (Cardboard Display Or Blister). Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, A Portable Inverter-Type Machine For Manual Welding, Capable Of Providing Full-Fledged Welding Work At The Household (And Not Only) Level. The Unit Is Simply Connected To A Household Power Supply With A Voltage Of 220 V And Is Designed To Work With Coated Welding Electrodes And A Metal Core Diameter Of Up To 6 Mm Inclusive. Mains Frequency, 50Hz, Operating Voltage Mma, 10.4 - 30V, Open Circuit Voltage, 85V, Electrode Diameter, 6.0 Mm, Adjustable Arc Force - Yes. Insulation Class - H. Protection Class Ip21. Welding Current Control Range 10…250 A. Maximum Current Consumption 29 A. Input Voltage Range 140…260 V. Anti-Sticking Function Anti Stick. Overheat Protection: Automatic. Cooling Is Forced. Hot Start Function: Yes. Overheat Protection - Automatic. Load Duration 70%. Arc Voltage - 30 V. Power Factor 0.7. Supply Voltage, 140-260V. Operating Temperature Range, -20+50С°. Power Source Type - Inverter. Maximum Power Consumption: 9.5 Kw. Efficiency 80%. Warranty Period Is 24 Months. Warranty, 24 Months. Dimensions In Packaging, 380X330x315 Mm. Package Weight, 7 Kg. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Band Saw Blade Endless Band Saw Blade For Tabletop Band Saw, Designed For Straight And Curved Cuts On Wood, Plywood, Chipboard And Mdf. Main Geometric Parameters: Total Length Of The Web Along The Internal Contour - 2320 Mm (Permissible Deviation ± 2 Mm), Tape Width - 12.7 Mm. The Manufacturing Material Is High-Quality Spring Tool Steel 65G, Hardened To High Hardness To Ensure Elasticity And Prevent Stretching And Tearing Of The Tape During Operation. Tooth Options: 6 Tpi (6 Teeth Per Inch) Tooth Pitch For Clean Cuts And Versatility When Working With A Variety Of Woods. The Maximum Permissible Cutting Thickness In Wood Is At Least 170 Mm. The Blade Must Have Set And Sharpened Teeth, Ready For Immediate Installation On The Machine, Without Requiring Additional Soldering Or Welding. Supplied In Individual Rigid Cardboard Packaging (Box), Which Prevents Deformation Of The Coils And Damage To The Cutting Edges During Storage And Transportation. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, A Set Of Replaceable Woodworking Cutters For A Manual Electric Router, With A Landing Shank Diameter Of Strictly 6 Mm A Set Of Replaceable Woodworking Cutters For A Manual Electric Router, With A Landing Shank Diameter Of Strictly 6 Mm. The Total Number Of Cutters In The Set Is At Least 12 Pieces. The Cutting Part Of Each Cutter Must Be Equipped With Carbide Tipped Tungsten Carbide (Industrial Alloy Vk8 Or Similar In Hardness), Providing High Wear Resistance And Resistance To Chipping When Processing Hardwood, Chipboard And High-Density Mdf. The Cutter Shank Must Be Made Of High-Alloy Tool Steel Containing Chromium, Thermally Hardened To A Hardness Of At Least Hrc 45, Which Guarantees Tight, Backlash-Free Fixation In The Collet Chuck And Eliminates Runout At Operating Speeds Of Up To 30,000 Rpm. The Set Should Include Various Profiles For Complex Carpentry Work: Straight Grooves, Fillet Edges (With A Radius Rounding), V-Shaped, Rebated, Copying With A Support Ball Bearing, As Well As Profile Cutters For The Tongue-And-Groove Connection. All Tools Must Be Supplied In A Hard, Impact-Resistant Plastic Organizer Case With Individual Holders And Clamps To Prevent Contact Between The Cutting Edges. The Delivery Set Includes Two Open-End Wrenches For Fixing The Spindle When Replacing Equipment. The Presence Of Factory Markings Of Alloy Or Hardness On The Surface Of Cutters Is Welcomed As Confirmation Of Quality. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Eccentric Sander Type – Electric Eccentric (Orbital) Alteco Ex480 Grinder. Power Consumption – 480 W. Supply Voltage – 220 V, Frequency – 50 Hz. The Diameter Of The Sanding Pad Is 125 Mm. Rotation Speed – 4000–14000 Rpm With Electronic Speed Control. The Vibration Amplitude Is 2.3 Mm. System For Maintaining Constant Speed Under Load (Constant Electronic). Overload Protection. Fastening Of Sanding Sheets – Velcro (Velcro). The Presence Of A Sole Brake. Dust Removal System With Dust Bag. Possibility Of Connecting A Construction Vacuum Cleaner Through A Pipe With A Diameter Of 35 Mm. Dustproof Power Button. Network Cable Length – 2 M. Weight – 2.4 Kg. Contents: Sanding Machine, Additional D-Handle, Dust Bag, Sanding Sheet, Instruction Manual. . Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, The Angle Grinder Is A Power Tool For Processing Various Surfaces And Materials, Such As Metal, Stone, Concrete, Etc. It Is Equipped With A Powerful 1400 W Motor And A Disc Diameter Of 125 Mm. Dust And Overload Protected With A Cooling System That Prevents The Tool From Overheating. Adjustable Rear Flange For Quick Disc Changes. Grinder To Facilitate Its Use In Hard-To-Reach Places. Engine Power 1400 W, Number Of Disc Revolutions From 2800 To 11500 Rpm. Adjusting The Soft Start Speed Makes Starting The Cutting Element Neat And Safe. Safety Interlock For Safety Because It Prevents The Unit From Starting Unintentionally. An Additional Handle With An Adjustment Function Allows You Not Only To Firmly Hold The Tool With Both Hands, But Also To Perform Work In Hard-To-Reach Conditions. Low Operating Noise Level Of 103 Db, Without Causing Damage To The Hearing Of Others. Equipment: Angle Grinder. Protective Cover For Disk 1 Pc. Handle Stand 1 Pc. Key For Disk Replacement 1 Pc. Additional Handle 1 Pc. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Gasoline Chain Saw Is Designed For Felling Huter Trees, Sawing Wood, Trimming Branches, Collecting Firewood, Performing Work On Maintaining Parks, Squares, Green Spaces And Landscaping., Cutting Discs Ø125, 1.2*22.23 A Cutting Wheel Designed For Precise And High-Quality Cutting Of Various Metals: Cast Iron, Stainless Steel, Etc. Made On High-Quality Bakelite Bond, It Can Be Used Under Heavy Loads And At High Speeds. The Disc Is Characterized By Uniform Grinding Of The Working Part And Almost Complete Absence Of Heating In The Cutting Area, Due To Which It Is Designed For A Long Period Of Use. Characteristics: Application Surface Material: Metal Bore Diameter (Mm): 22.23 Diameter (Mm): 150 Disc Thickness (Mm): 1.4 Maximum Rotation Speed (Rpm): 13300 Shape: Straight Disc Type: Cutting Disc. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Gasoline Motor Pump Huter Mp-100 For Pumping Clean Water; Engine Type – Gasoline, Four-Stroke; Engine Displacement – 210 Cm³; Power – At Least 5.2 Kw (7 Hp); Productivity – Not Less Than 500 L/Min; Diameter Of Suction And Discharge Pipes – 50 Mm (2”); Maximum Height Of Water Rise – No Less Than 26 M; Maximum Suction Depth – No Less Than 7 M; Maximum Size Of Particles Passed Through – Up To 5 Mm; Engine Speed – Up To 3600 Rpm; Fuel Tank Volume – No Less Than 3.6 L; Oil Sump Volume – 0.6 L; Fuel Consumption – No More Than 0.5 L/H; Start – Manual Starter; Pump – Self-Priming; Reinforced Metal Tubular Frame With A Pipe Diameter Of 25 Mm; Fuel – Ai-92 Gasoline; Overall Dimensions – No More Than 490X385x405 Mm. Equipment: Motor Pump, Suction Filter, Set Of Tools And Accessories. Deliveries - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Spark Plug For Two-Stroke Gasoline Engines Spark Plug For Two-Stroke Gasoline Engines Patriot L8rtc For Hand-Held Garden Equipment (Chainsaws, Trimmers, Brush Cutters). Spark Plug Type - L8rtc (Or A Complete Analogue Of Ngk Bpmr7a). Thread - M14x1.25 Mm, Length Of The Threaded Part - 9.5 Mm (Short Body, Designed Specifically For Small-Scale Mechanization). The Hex Key Size Is 20.8 Mm (3/4 Inch). The Heat Rating Is Average, Ensuring Sparking Without Overheating At Speeds Up To 12,000 Rpm. The Side Electrode Is Made Of Corrosion-Resistant Nickel Alloy. Spark Gap - 0.5–0.7 Mm. Supplied In Individual Blister Packaging That Protects The Ceramic Insulator And Electrodes From Damage. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Round Sanding Disc, For Sanding Machine, 125Mm, Set Of 10 Pcs. A Set Of Grinding Wheels (Abrasive Discs) On A Sticky Base For A Manual Angle Grinder (Grinder) With A Diameter Of 125 Mm. The Outer Diameter Of The Circle Should Be 125 Mm, The Diameter Of The Mounting Hole Should Be 22.2 Mm (Standard For Angle Grinders), The Thickness Of The Disc Should Be No More Than 6 Mm. The Abrasive Material Is Electrocorundum (Aluminum Oxide) Or Silicon Carbide On A Fiber Or Thick Paper Base. The Wheels Are Designed For Grinding And Cleaning Surfaces Made Of Ferrous Metal, Non-Ferrous Metal, Wood And Paint Coatings. A Mandatory Requirement Is The Presence In One Set Of Different Grits To Perform Coarse Grinding (Grit P24/P36), Intermediate Processing (P60/P80) And Finishing Grinding (P120/P220), Which Provides A Comprehensive Surface Treatment. The Circles Must Be Packed In A Common Cardboard Box Or Blister Packaging To Prevent Damage To The Abrasive And Deformation Of The Shape During Storage And Transportation. The Number Of Circles In One Set Is At Least 10 (Ten) Pieces. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Petrol Brush Cutter (Hand Trimmer) A Professional-Class Petrol Brush Cutter (Hand Trimmer) With A Two-Stroke Engine, Designed For Intensive Work On Mowing Grass And Small Growth Over Large Areas, Stihl Fs 131. Engine Type - Two-Stroke, Single-Cylinder, Air-Cooled, Cylinder Displacement - At Least 36.6 Cm³, Rated Power - At Least 1.8 Kw. Starting System - Manual Starter With An Easy Start System (Ergostart), Ignition System - Contactless Electronic (Sem Type). The Rod Is A Rigid Solid Steel Rod With A Durable Aluminum Casing. The Control Handle Is A Bicycle Type, Equipped With A Professional Anti-Vibration System (Based On Spring Dampers), Which Reduces Vibration On The Operator’S Hands To Standard Values. The Fastening Unit Has A Built-In Rotary Lock For Quick Replacement Of Cutting Equipment. Cutting Equipment Included: Double-Edged Knife (Length No Less Than 255 Mm) And Semi-Automatic Line Trimmer Head (Maximum Line Diameter 2.4 Mm). Included: Shoulder Strap, Safety Glasses, Protective Cover, Tool Kit And Instructions In Russian. Country Of Origin - Germany Or Eu Country (Indicating The Manufacturing Plant). Warranty Period - At Least 24 Months From A Certified Dealer. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, The Crown Brushless Cordless Handheld Circular Saw Must Be Equipped With A State-Of-The-Art Brushless Motor That Provides Saw Blade Speeds Of Up To 6000 Rpm. Designed For Cutting Various Types Of Building Materials, Such As Wood, Aluminum, Ceramic Tiles, Laminated Boards, Parquet. The Compact Body Should Allow You To Work Comfortably With One Hand. Maneuverable Saw For Working In Hard-To-Reach Places. Motor Type: Brushless. Power Type: Battery. Battery Type: Li-Ion. Battery Device: Slider. Battery Voltage: 21 V. Battery Capacity: 4 Ah. Number Of Batteries Included: 1. Disc Diameter: 145 Mm. Disc Mounting Diameter: 20 Mm. Number Of Cutting Teeth: 24 Pcs. Disc Location: To The Left Of The Handle. Max. Cutting Depth At An Angle (90°): 52 Mm. Max. Cutting Depth At An Angle (45°): 32 Mm. Adjustable Cutting Depth: Yes. Max. Number Of Revolutions: 6000 Rpm. Availability Of Soft Start: Yes. Spindle Lock: Yes. Unintentional Start-Up Protection: Yes. Overload Protection: Yes. Jam Protection: Yes. Keyless Replacement Of Equipment: No. Availability Of A Pipe For Connecting A Vacuum Cleaner: Yes. Base Material: Steel. Battery Platform: 21Vmax Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan.
|
