|
Bids Are Invited For 1. Pure Graphite Packing In Braided Form Reinforced With Inconel Wire Suitable To Withstand Pressure Of 450 Bar And Temperature 600 Degree C 2. Grafseal Formed Gland Packing In Two Halves With Oblique Cut For High Pressure Valves. Service Temperature-600 Deg C, Pressure-300 Kg/Cm. Sq. Ph-0-14 3. Jointing Sheet Non Asbestos, Non Metallic, Working Pressure - 70 Kg/Cm² Or Above, Working Temp.- 300°C Or Above, Size- 1500Mm X 2000 Mm X 0.5Mm, Suitable For Water, Steam, Superheated Steam 4. Jointing Sheet Non Asbestos Metallic (Reinforced With Metallic Wire Mesh), Working Pressure - 200 Kg/Cm² Or Above, Working Temp.- 550°C Or Above, Size- 1500 X 2000 Mm Or 1000 X 1000 Mm, Thickness- 4 Mm. Suitable For Steam. 5. Jointing Sheet Non Asbestos Non Metallic, Working Pressure - 150 Kg/Cm² Or Above, Working Temp.- 400°C Or Above, Size- 1500 X 2000 Mm Or 1500 X 1600 Mm, Thickness- 1.5 Mm. Suitable For Oil 6. Packing Ropes For Labyrinth Seal, Temp - 300 Deg C, Pr - 50 Bar, Moc - Non-Asbestos, Dimension - 12.5 Mm Sq, Length - 1950 Mm 7. Ready Cut (Pre-Cut) Gasket For Coal Nozzle Specification: Od=780 Mm, Id=700 Mm, Thk=3 Mm, 8. Ready Cut (Pre-Cut) Gasket For Coal Nozzle (Burner Isolation Gate) Specification: Od=840 Mm, Id=640 Mm, Thk=3 Mm, 11 9. Ready Cut (Pre-Cut) Gasket For Ignitor Assembly Specification: Od=125 Mm, Id=60 Mm, Thk=3 Mm 10. Ready Cut (Pre-Cut) Gasket For Oil Gun Assembly Specification: Od=310 Mm, Id=170 Mm, Thk=3 Mm, 11. Ready Cut (Pre-Cut) Gasket For Scanner Assembly Specification: Od=170 Mm, Id=90 Mm, Thk=3 Mm, 12. Spiral Wound Metallic Gasket For Boiler Drum & Bottom Ring Header 13. Spiral Wound Gasket With Outer Centering Ring, 14. Spiral Wound Metallic Gasket For Ms Erv & Ms Erv Isolating Valve 15. Spiral Wound Metallic Gasket For Ms Erv Pilot Valve 16. Spiral Wound Metallic Gasket For Scaph Valve 17. Spiral Wound Metallic Gasket For Hrh Erv Main Valv 18. Ready Cut (Pre-Cut) Gasket For Dome Valve (Set Of Gaskets) Specificati Etc.
|
