|
Tender for Miscellaneous Works In Design Department.-1(A) Civil Works1.01Applying putty of total thickness 1mm in two coats of approved brands Birla /JK/Asian to wall surfaces at all heights including applying suitable primer after through scrapping, sand papering and cleaning the old paint surface by manually/mechanically including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achieved etc., complete all as directed.1.02Providing and fixing false ceiling with 7 mm thick pre finished gypsum tile boards of Armstrong / USG knauf or equivalent make (Equivalent cost & Specifications) of Size 600 x 600 mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised powder coated iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grains per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall/ partition with the help of plastic rawl plugs at 50mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications complete all as directed.1.03Repairs to existing false ceiling and replacing the damaged boards with matching boards including required materials and manpower, scaffolding & staging and disposal of damaged sheets and grid to scrap yard etc., complete1.04Demolishing/Chipping/Removing of existing RCC chajjas, lintels of height 10M manually / by mechanically means without damaging the boundary wall and other structures in and around, separate the reinforcement bars and handover the same to Disposal section by weighment and stack the unserviceable material within 50 meters lead etc., complete all as directed1.05Demolishing of RR/PCC/RCC/ Brick wall in Cement mortar by manually/mechanical means including stacking of serviceable material & handing over of useful materials to scrapyard/YCM Civil R&M section and disposal of unserviceable materials with in a 100M lead etc., complete all as directed by EIC1.06Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto 10M height in all shapes and sizes in cement mortar 1:6 (1) Cement: 6 coarse sand) including cost of cement (PPC Ramco), required materials and scaffolding/staging etc., complete all as directed.1.07Drilling of holes of dia 16mm to 25mm by using electrically operated machine or any other equipment in existing plain or reinforced cement concrete upto a minimum depth of 100 mm and upto 200 mm deep, fixing the reinforcement in position by grouting Lock Fix of fosroc make or equivalent induding cost of labour, tools & plant but excluding cost of reinforcement bars etc., complete all as directed. (Nature of work from 0.5M to 12M from GL)1.08Supply and providing HYSD bar reinforcement of Fe-550D grade of approved make SAIL RINL TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed. (Nature of work from 0.5M to 12M from GL)1.09Providing water proof MS / Wooden centering and shuttering including strutting, propping for lintels and slabs and whereever specified etc., including removal of form work complete etc., complete all as directed. (Nature of work from 0.5M to 12M from GL)1.1Providing and laying reinforced cement concrete work in nominal mix of 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III):3graded stone aggregate 20mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement and including cost of cement (opc 53 Grade- UltraTech, ACC, Nagarjuna & KCP) and all materials & men etc., complete. (Nature of work from 0.5M to 12M from GL)1.11Providing modified polymer mortar with cement sand ratio in 1:3 using Nito-bond SBR @ 7 Lits per Bag of cement, average thickness of 20 mm over the primed surface using Nito-Bond SBR in 1:1:3 by volume with necessary scaffolding arrangements etc. including cleaning of rest on reinforcement and application of nito zinc primer of fosroc make etc., complete (SBR:Water:Cement)1.12Providing and fixing 1st quality anti-skid / matt floor tiles in steps including hacking of surface of size 300mmx300mm of 9mm ± 1mm thickness as per market in floors conforming to IS 15622 of approved make Kajaria / RAK/Johnson in all colours and shades laid on 20mm thick cement mortar (1:4) (1 cement: 4 coarse sand) and providing matching pigment to maintain the level including required materials etc., complete all as directed.1.13Cleaning of floor tiles with necessary chemical/cleaning liqu or any suitable medthod to remove the stains and dark spots etc., complete all as directed.1.14Supply and Fix the vertical venetian blinds with fabric of thickness 2 mm of approved make Jacobs / Vista with extruded aluminium head rail, carrier system, operating mechanism and aluminium frame including all fittings and accessories etc., complete all as directed.1.15Providing and fixing aluminium die cast body tubular type universal hydraulic door closer of make Godrej or its equivalent (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete1.16Providing and fixing 30/32 mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, solid core of block board construction without frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including necessary butt hinges etc., Complete all as directed1.17Repairing and refixing of wooden window shutter/ wooden door shutter1.18Provide and fix Stainless steel tower bolts of size 150x10 mm with necessary fittings for doors.1.19Supply and providing Stainless Steel hardware items 150mm door stopper1.2Supply and providing Stainless Steel hardware items 150mm long Handle for door1.21Supply and providing Stainless Steel hardware items 300mm long aldrop for door1.22Providing and fixing 1st quality staineless steel 304 grade Mosquita fly proof mesh to windows and Ventilators including necessary MS flat beadings on all edges and centre including necessary scaffolding and staging works etc., Complete all as directed.1.23Providing two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after thorough scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.1.24Apply two coats of premium quality arcylic emulsion paint of interior grade of approved brand like Asian paints (Royal shine) / Berger (silky luxury) including applying suitable primer including necessary scaffolding and staging where ever required etc., complete.1.25Providing two(2) coats of synthetic enamel paint over a coat of zinc rich primer to wooden surafces / steel surfaces like doors, windows, grills etc., of required colour using approved branded paints like Asiam / Berger / Nerolac, after removal of paint on old surface using wire brush or sand paper to give an even shade etc., complete all as directed22.01Electrical WorksConcealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for One point controlled by one switch as directed (It includes finishing with CM 1:5 and surface to match with the existing surface.2.1Calling Bell, Remote battery operated type. Make Havells, Goldmedal, Anchor, Crompton2.11Supply, fix, test and commissioning of 1 phase 240V, 50 Hz 400mm oscillating sweep wall mounting fan along with 2 Modular 6A, Switch cum Socket. Make: CG/Almonard/Havells/Orient, Usha2.12Shifting of existing available Exhaust Fan from Ladies dining area to Pink Hall dining area along with making suitable hole to the wall for exhaust fan and packing of Old hole at Ladies dining
|
