Tender For Supply, Installation, Testing & Commissioning Of Mini Silage Baler Msb 500 in India

Work Detail

Tender for Supply, Installation, Testing & Commissioning Of Mini Silage Baler Msb 500 , Supply, Installation, Testing & Commissioning Of Mini Silage Baler Msb 500 Equipment Minimum Technical Specification Mentioned In The Bid Document. , 1 General Specifications: • Type: Tractor Operated / Motor Operated (Fast Forward) • Should Be Suitable Maize And Other Green Fodder (Mainly Maize) • Technology: Integrated, Instantly Fill Roto N Push Press Type • Bag Capacity: Min. 50 Kg With Chain Conveyor • Packing Capacity: Min. 4Ton/Hr Or Min. 16 To 25 Bales • Machine Height: Approx. 10 Feet • Length: Approx. 12 Feet - 15 Feet • Capacity To Make Silage Dry Matter: Min. 20-50% • Transmission: (Carden Shaft) Included • Transmission Gearbox: Helicoidally • Pto Rpm: Min. 540 / 1440 Motor • Compaction Ratio: 3:01 • Silage Pressure Capacity: Min. 650 Kg/M3 • Shape Of Bag: Rectangular • Packing Drum: 8 Nos., Upper 4, Bottom 4 • Hydraulic Pressing: Hydraulic Press System Used With Ss Material That Makes Sure No Contamination In Fodder While Pressing • Hydraulic Pressing Control: Plc Control • Hydraulic Oil Grade: Vg68 Or Any Equivalent • Hydraulic Oil Tank Capacity: Min. 150 Liters • Hydraulic Pump Type: Coupling Of Pump Type Close Coupling Single Bearing; Hydraulic System 38Lpm With Wire Enforce Rubber Strong Piping • Machine Wheel Size: Wheel Size Approx. 600 X 16 Movable Type • Bag Pressing Stroke: Single Shot • Continues Capacity: Min. 5000 Kg • Paint: Weather Resistant And Pu Top Coat • Mobility: Easily Movable Farm To Farm Suitable • Bags Size: 24X 50 • Inner Liner Polythene Uv Protected 150-170 Micron, Reusable 2 Times • Optional: Outer Liner Pp Bag 80 Micron For Long Transportation. • Packing Type: Organic Rope Thread • Reusable: K Noted • Bag Drum Specification (L X B X H): Approx. 370 X 270 X 930 Mm • Drum Thickness: Min. 2.6 Mm • Frame Thickness: Min. 5 Inch Channel • S.S Rod Thickness: Min. 45 Mm • Bag Specification: Approx. 24.5 X 50 Inch. • Power Take-Off Drive Shaft: O Type: Triangular Type O No. Of Splines: 6X10 O Length Of Shaft, Mm: Closed: 1016 Mm; Extended: 1905 O Provision For Locking: Spring Lock Pin 1.2 Constructional Details: 1.2.1 Main Frame: 1) Type: Rectangular Type 2) Size Of Frame, Mm: 3149 X 1270 X 2540 Mm 3) Material: Ms 4) Size Of Channel: 152.4 Mm 1.2.2 Feeding Assembly:- 1) Type: Elevator Chain Type 2) Material: Ms / Pu Coated 3) No Of Roller: 2 4) Size Of Roller: Approx. 12 Ft. X 1.5 Ft. 1.3 Gear Box: - • Type: Bevel Gear Box • Material: Cast Iron • Gear Ratio: 1:1.75 • Type Of Lubrication: Grease With Oil 140 No. • Service Schedule: After 300 Hrs Of Working • No Of Teeth On Drive: 6 • No Of Teeth On Driven: 10 • Method Of Power Transmission: Pto Shaft • Method Of Lubrication: Grease Gun • Recommended Lubricant: Lithium Grease Or Any Equivalent 1.4 Silo-Pack Details: • Size Of Bag Chamber (L X B X H): Approx. 11.5 X 14.5 X 50 Inches • Hydraulic Mechanism: O Hydraulic Cylinder: Number: 1 Nos.; Bore: 63 Mm; Rod: 45 Mm; Stroke Length: 1800 Mm • Test Pressure (Bar): 180 Bar • Working Pressure (Bar): 120 Bar 1.5 Hydraulic Oil: • Appearance: Should Be Clear • Kinematic Viscosity @ 40 C: Min. 68.3 Cst • Kinematic Viscosity @ 100 C: Min. 9.39 Cst • Density G/Cc @ 15 C: Min. 0.860 • Flash Point: Min. 238 Degree Celsius 1.6 Hydraulic Hose Pipe: • Type: Sae 100 R2at Or Equivalent • Working Pressure: 275 Bar • Inside Dia.: 6.35 Mm 1.7 Hydraulic Tank: • Oil Capacity In Tank: Min. 150 Liters • Mounting In Tank: Hyd. Hose Union, Lever Gauge, Tank Air Breather • Safety Device: Temp Gauge, Pressure Gauge, Tank Holding System 1.8 Pressing Mechanism: • Type: Relay Type • Method Of Operation: Automatic Operation 1.9 Safety Arrangements: • Safety Pin: Safety Pin Given To Stop Machine Automatically In Emergency • Hydraulic Oil: 68No. Or Any Equivalent Min. 150 Liter • Motor: 30Hp And Stand Starter 30Hp • Cable (Armad): 15 Meter; 80 Mm; 4 Core Cable 200 Ft , Installation And Commissioning

Contact Information