|
Bitumen Mastic, 24 L Bucket. Mastic Is A Material For Waterproofing Underground Parts Of Buildings And Structures, Made From Petroleum Bitumen With The Addition Of Fillers, Solvent And Technological Additives. Helps To Isolate Building Structures From Exposure To Water. The Material Is Suitable For Application To Any Substrate Protected From Direct Sunlight. Composition Consumption: From 1 Kg/M2. Water Absorption Over 24 Hours By Weight, %, Not More Than: 2 Mass Fraction Of Non-Volatile Substances,%: 75-90 Destination Material: Concrete, Wood, Reinforced Concrete Application Method: Brush, Spatula Purpose: Waterproofing Adhesion Strength To Concrete Base, Mpa, Not Less: 0.1 Adhesion Strength To Metal Base, Mpa, Not Less: 0.1 Consumption, Kg/M²: 1 Shelf Life, Months: 12 Flexibility Temperature On The Beam R=5Mm, °C: -5 Application Temperature, °C: From -10 To 40 Storage Temperature, °C: From -20 To 30 Heat Resistance, °C, Not Less: 80 Type: Bitumen Packaging Type: Bucket Volume 24 L. Mastic Helps To Isolate Building Structures From The Effects Of Water. The Material Is Suitable For Application To Any Substrate Protected From Direct Sunlight. Composition Consumption: From 1 Kg/M2. Water Absorption Over 24 Hours By Weight, %, Not More Than: 2 Mass Fraction Of Non-Volatile Substances,%: 75-90 Destination Material: Concrete, Wood, Reinforced Concrete Purpose: Waterproofing Adhesion Strength To Concrete Base, Mpa, Not Less: 0.1 Adhesion Strength To Metal Base, Mpa, Not Less: 0.1 Consumption, Kg/M²: 1 Shelf Life, Months: 12 Flexibility Temperature On The Beam R=5Mm, °C: -5 Application Temperature, °C: From -10 To 40 Storage Temperature, °C: From -20 To 30 Heat Resistance, °C, Not Less: 80 Type: Bitumen Packaging Type: Bucket Volume 24 L. Conditional Viscosity: 10, Microfiber Is Ideal For Applying All Latex And Oil Paints, Liquid Impregnations, Varnishes And Wood Preservatives. Length, Mm - 240 Fur Coat Material - Microfiber Pile Height, Mm - 9 External Diameter Of The Base, Mm - 48, Square Steel Pipe 60X40x2 Mm Is A Reliable And Durable Material For Various Construction And Industrial Needs. Ideal For Framing, Structures And Other Projects That Require High Strength And Durability. Features: -Length 6.0 M - A Convenient Length For Most Construction Tasks. -Wall Thickness 2 Mm - Provides Additional Strength And Resistance To Stress. -High-Quality Metal - Made In Russia, Which Guarantees High Quality Standards, Profiled Sheet Mp-20X1100 Is A Popular Material For Roofing Installation. It Is A Sheet Of Galvanized Steel With A Coating. The Total Thickness Of Galvanized Metal With A Protective And Decorative Coating Is 0.7 Mm. After Rolling On Special Equipment, The Steel Takes On A Wave-Like Appearance. The Rigidity Of A Profiled Sheet Is Much Higher Than That Of A Flat Sheet. Coating: Zinc Thickness: 0.7 Mm Width: 1100 Mm, Length 4900 Mm, Skirting Board 6Cm. Type Plinth Fastening Glue, Self-Tapping Screws Material Plastic Surface Type Matte Relief Surface Structure Length 2200 Mm Width 22 Mm Height 60 Mm Color Gray, Edenge Arnalgan Kalyңdygy 1.2 Cm 600X600 Mm Oreskel Syrtky Porcelain Tiles. Beti Kungirt. Tusi Sur, Tas Astyndagy Ornek Hips., Artificial Leather (Dermantine) Dermantine Artificial Leather Is Suitable For Upholstery Of Various Interior Items And For Other Decorative Finishes. Width 1.4 M Length 40 Meters. The Price Is Indicated For 1 Linear Meter. Color Black., Fittings F 12 A3 (A400), Gost 5781-82, Periodic Profile. Profile: Periodic (Corrugated) With Two Longitudinal Ribs And Transverse Protrusions Extending Equally On Both Sides. Diameter: 12 Mm. Strength Class: A400 (Old Designation A3). Weight: The Theoretical Weight Of 1 Linear Meter Is 0.94 Kg (Deviations Are Allowed Depending On The Manufacturer). Steel Grades: Low-Alloy Steels 35Gs (For Conventional Structures) Or 25G2s (Welded) Are Most Often Used. Surface: Must Be Free Of Pitting, Cracks, Dulling, Or Rust That Would Reduce Strength. Length: Rods Are Manufactured In Measured (Usually 11.75 M) Or Unmeasured Lengths., Fittings F 18 A3 (A400), Gost 5781-82, Periodic Profile. Profile: Periodic (Corrugated) With Two Longitudinal Ribs And Transverse Protrusions Extending Equally On Both Sides. Diameter: 18 Mm. Strength Class: A400 (Old Designation A3). Weight: The Theoretical Weight Of 1 Linear Meter Is 2.05 Kg (Deviations Are Allowed Depending On The Manufacturer). Steel Grades: Low-Alloy Steels 35Gs (For Conventional Structures) Or 25G2s (Welded) Are Most Often Used. Surface: Must Be Free Of Pitting, Cracks, Dulling, Or Rust That Would Reduce Strength. Length: Rods Are Manufactured In Measured (Usually 11.75 M) Or Unmeasured Lengths., Plasterboard Sheets (Plasterboard) Are A Construction And Finishing Material Used For Ceilings. Gypsum Plasterboard Sheet (Gkl) Is A Rectangular Element That Consists Of Two Layers Of Special Cardboard With A Layer Of Gypsum Dough With Reinforcing Additives, While The Side Edges Of The Strip Are Folded With The Edges Of The Cardboard (Front Layer). Cardboard Color Is Grey. Pc Straight Edge Main Dimensions, Mm 2500X1200x9.5Mm, Square Steel Pipe 50X25x2 Mm Is A Reliable And Durable Material For Various Construction And Industrial Needs. Ideal For Framing, Structures And Other Projects That Require High Strength And Durability. Features: -Length 6.0 M - A Convenient Length For Most Construction Tasks. -Wall Thickness 2 Mm - Provides Additional Strength And Resistance To Stress. -High-Quality Metal - Produced In Russia, Which Guarantees High Quality Standards., Porcelain Tiles Are Suitable For Laying On Floors And Walls In The Living Room, Hallway, Hall, Kitchen, Bathroom, Bedroom, Offices, Shops, Cafes, Restaurants, Hotels And Business Centers. The Matte Glossy Surface Is Easy To Clean, Resistant To Moisture, Abrasion And Daily Stress. Purpose Of Tiles: Universal Type Of Tile: Porcelain Stoneware Tile Shape Square Color Light Brown Tile Length 600 Mm Tile Width 600 Mm. Thickness 8Mm., Metal Corner 50*50*4Mm (L=12M). Metal Corner 50X50x4 Mm - A Metal Profile With An Equal-Flange Section, Made Of Carbon Steel. This Coating Protects The Product From Corrosion, Providing High Resistance To Moisture, Precipitation And Temperature Changes. Galvanized Angle Has Rigidity, Strength And Precise Geometry, Which Makes It Popular In Construction, Installation Of Metal Structures, Frames, Supports, Fasteners And Engineering Systems. Size 50*50*4Mm Length 11.75M, Deep-Penetrating Primer Is Designed To Strengthen And Regulate The Absorbency Of Walls And Ceilings. Prevents Rupture Of The Application Layer And The Formation Of Cracks. Type Of Processed Material: Drywall, Wood. Type Of Use: For Interior Work. Packing Of Material 10 L. In One Bottle Colorless Material. Application Method: Roller., Galvanized Profiled Sheet Ns44 0.8Mm 1000X6900, Construction Quicklime (Lump), Fraction 20/40 - Natural Mineral Material Of White Color, 1St Grade. Supplied In 30 Kg Bags. Scope Of Application Lump Quicklime Is Used: In The Production Of Sand-Lime Bricks In The Production Of Plaster Mortars In The Production Of Slag Concrete And Other Building Materials For The Preparation Of Building Mixtures In Horticulture And Agriculture For Whitewashing Trees For Treating Plants Against Pests For Soil Deoxidation And Fertilization The Material Is Widely Used Both In Industrial Construction And In Private Households. Packing: 30 Kg, Galvanized Corrugated Sheet Mp20 0.7Mm 1100X6000. Profiled Sheet Mp-20X1100 Is A Popular Material For Roofing Installation. It Is A Sheet Of Galvanized Steel With A Coating. The Total Thickness Of Galvanized Metal With A Protective And Decorative Coating Is 0.7 Mm. After Rolling On Special Equipment, The Steel Takes On A Wave-Like Appearance. The Rigidity Of A Profiled Sheet Is Much Higher Than That Of A Flat Sheet. Coating: Zinc Thickness: 0.7 Mm Width: 1100 Mm, Length 6000 Mm, Galvanized Corrugated Sheet (Zinc Layer 120 G/M) Brands: H16 Galvanized And Polymer Coated Color: Dark Gray, Thickness 5 Mm Sheet Length From 6 Meters Sheet Width 1050/1000 Mm Used For: - Covering The Roofs Of Private Houses, Warehouses And Industrial Premises - For The Construction Of A Fence - Wall Cladding, Wave Height 5 Mm. Leaf = Piece
|
