|
Tender for Supply, Erection & Commissioning Of 110 Volt 500Ah Lead Acid Tubular Lm Type Battery Set And Automatic 110V/100 . Battery Charger At 132Kv Substation Jwalapur. , Supply Of Material , Supply Of C10 Capacity ,110 Volt ,500 Ah Lead Acid Lm Type Tubular Transparent Battery San Container 500 Ah Of Apporved Vendor Of Ptcul ,Set Having 55 Nos Cells Of Rating 2 Volt ,500 Ah ,C10 Type Float Voltage Of Each Cell 2.23 +/0.02 Volt At 27 Degree Temp Including All Other Accessories. , Supply Of Automatic Float And Float -Cum Boost Charger 110V/100 Amp. Suitable To Charge A Battery Bank Of 110 V/ 500 Ah Lm Tubular Battery Bank (55 Cells Of 2 V Each), Working On Ac Input 415 V Ac + 10 % ,50 Hz +10 % , Erection Of Work , Providing And Fixing /Fabricatio Of T-Wood With Anti Acid Paint Wooden Battery Stand Suitable For 110 Volt 500 Ah Tubular Lead Acid Battery Set,Containing 55 Cells ,Teak Wood Stand Should Be Insulated With Anti-Acid Pvc Insulation. , Transportation Charges Including Shifting Uplifting And Required Other Items Viz Crane ,Along With All T & P And Labour . , Dismantling Of Old 110 Volt Battery Set Including Opening Of All Inter Connection Room All Labour ,T&P Etc. With Proper Stacking As Per Direction Given By The Connected Engineer. , Providing, And Laying Of 01 Core, 120 Sq.Mm Cu Cable From Dcdb To Charger Including All Material (Cable Gland, Lugs Etc.), Labour And T&P Etc As Per Site Requirement. , Replacement Of Damaged Cable Of Battery Charger To Ac Power Supply Cubical Including Removal Of All Damaged Cable Then Providing Of New Cable Including All Labour, Material And T&P Etc. Required For Completion Of Work. , Providing & Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering And Shuttering, Finishing. All Work Upto Plinth Level 1:1.5:3 ( 1 Cement, 1.5 Coarse Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size) , Erection And Commisioning Of New 110 V Battery Set, Including Filling Of Electrolite,Top Up By Distilled Water, Fixing Of Inter Connection Strips Etc, Then The Contractor Is To Provide One Number Skilled & Unskilled Labour Round The Clock. Work To Be Done Under The Supervision Of Concerened Engineer/Exide Engineer. , Manufacturer Engineer Supervision Charges For Installation & Commisioning For 110 V 500 Ah Tubular Battery Bank. , Erection Of Automatic Float And Float -Cum Boost Charger 110V/100 Amp. Suitable To Charge A Battery Bank Of 110 V/ 500 Ah Lm Tubular Battery Bank (55 Cells Of 2 V Each), Working On Ac Input 415 V Ac + 10 % ,50 Hz +10 % Erection Of 33Kv Indoor Termination Suitable For 3.5 X 400 Sqmm Cable At Acdb Panel.
|
