|
Repairing to Residential and Non-Residential Building Under Medical (R and B) Division, Ahmedabad.- excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(a) loose or soft soil., filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.., filling in plinth with sand under floors including watering ramming, consolidating and dressing complete., providing and laying cement concrete 1:2:4 (1- cement : 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (a) foundation and plinth ., providing tmt bar fe 500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level ., brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional ., brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinthin cement mortar 1:6 (1- cement : 6 -fine sand) superstructure above plinth level upto floor two level (b) conventional., half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional., steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like ., providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. ., providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry )., providing and laying polished kota stone slab flooring over 20mm (average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or l.m. 1.1.5 (1-lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (a) 25mm thick ., providing and laying cement concrete flooring1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (b) any thickness.., p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade ., providing & laying vetrified granite tiles 8mm to 10mm thick in skirting risers of steps and dedo on 10mm thick cement plaster in 1:3 in white ceand jointed with white cement slurry., providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of m250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with c:m 1:3 (1cement:3fine sand) etc complete. ., providing and fixing pre-cast rubber dye / steel dye inter locking concrete block 60mm thick with grade of concrete m300 pnumatic compressed / vibrated mechanically and as per approved design confirming to is 15658 : 2006 including 35 mm sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of irc : sp 63-2018 etc. complete.., providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)cement mortar 1:3 (1-cement:3-sand) ., providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) cement mortar 1:4 (1-cement :4-sand)., 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of c.m. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of c.m. 1:1 (1-cement : 1-sand) etc. complete.., providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand) finished with trovel including scaffolding curing etc. complete. ., demolition and disposal of unserviceable materials with all lead and lift.(i) cement concrete (unreince., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) r.c.c. work., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) in lime mortar.., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.., dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) not exceeding 3 sq.m. in area. ., dismentling c.i. pipes g.s.w.pipes abd a.c. rain water pipes with fittings and cl s including stacking the materials with all lead and lift ( for any dia, of pipe)., dismantling santtary fittings like wash basin . w.c. pan indian and european type, flushing tank etc. including stacking the materials with all lead and lift.., dismentalings cement asbestos hard board in ceiling or wooden partition walls, wooden trellies work including trellies work including frames ,stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.., removing and scraping of old deteriorated plaster of any thickness fromm wall / r.c.c member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift., applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. using imidacloprid 30.5 scas per is 6313 part -ii( (0.075 percent concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /sqm of surface is recommended as per i.s.., carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with i.s.i specification. using chlordene and chiorpurfiles 20 ec. as per 6131paret-ii consentration weight one percent is recommended i.e one litre 20 ec chemical emulsion with 19 liter give 1 percent concrentration inclusive of one litre chemical emulsion appication at the rate of 5 litre chemical / sqm of surface is recommended as per i.s., constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame (light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. (wt. of cover 23 kg.) and wt. of frame 15kg. ) (r.c.c. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) inside dimensions 455mmx 610mm and 450mm deep for single pipe line. ., providing and laying mirror polished green marble stone slab 20mm (average) thick for stair steps and riser as per design including full moulded round front edge in trede of steps lain on 20mm thick cement mortar 1:6 (1 cement : 6 course sand) jointed with grey cement slurry including rubbing and polishing etc complete.., providing and fixing frp frame size 100x50 mm and 28 mm thick frp shutter with depressed panel shutter having reinforcement on sides and edges and in gel coat finish. the core of shutter is to be filled up with injected fibre extingushing grade polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for taking hinges and fixtures. the whole frp frame and shutter is to be water proof, weather proof, termite proof, resistance to mild acid / alkali resistance inclduing s.s. hinges with necessary screws and aluminum fixtures and fastening.., providing and fixing gypsum false ceiling with grid type with alluminium frame consisting of 600mm x 600mm 3mm thick gypsum sheet used as panel insert in a frame work made using anodized alluminium t section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) the alluminium frame work is supported from the cceiling with the help of g.i. hook and g.i. wire/6mm m.s. rods of required sizes to maintain proper level etc. the aluminium frame work is supported on side wall with the use of alluminium l section of size 1 x 1 (25 x 25mm) angles etc. complete as per direction of engineer in charge. manufactures specification and drawing.., providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of jindal section no:4605,@ wt 1.094 kg / rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of jindal section no: 8687 @ wt.of 0.695 kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of jindal section no:8758 @ wt.of 0.0.659 kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of jindal section no:8949 @ wt.of 0.456kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of jindal section no:8947 @ wt.of 0.456kg/mt/ section 8948, @ wt. 0.457 kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.., providing and fixing window having extruded aluminum colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of jindal section no:2459 @ wt.of 0.738 kg/mt), horizontal three track member size 92mm x 31.75mm x 1.30mm (of jindal section no:8688,@ wt.1.07 kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of jindal section no:8933,@ wt. 1.06 kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of jindal section no:8947@ wt.of 0.456 kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of jindal section no:8949 @ wt.of 0.456kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc ., providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (jindal section :2434, @ wt. 0.643 kg/mt) with colour powder coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for ventilation., providing and fixing fly proof (mosquito net) galvanised m.s. wire gauge of i.s.l gauge designation 85 g. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood.., providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. ., providing and laying 18 mm thick mirror polished black granite marble stone machine cut in single piece (max. available) in sill and jambs laid over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed as approved by architect engineer in charge.., repairing of door & window including replacement of glass, screw,nut bolts,stoper,hinges, all fastening & fixture & labour as per instruction of engineer incharge.., pro. and fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by gi suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel a of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed., providing & erecting 6mm thick poly carbonate sheet roof 65 mm g.b. class pipe for vertical 3 mtr. centre to centre & 25 mm dia b class pipe 2.40 centre to centre parallel and 3.00 centre to centre per perticular including cutting, binding, bedding hooking excluding for foundation c.c. 1:2:4 for facing breading of 40 x 40 x 6 mm angle support 2 nos. & painting etc complete for parking shade., providing & fixing colour anodized alluminium partition partly panneled,partly glazed using alluminum section of frame size 63.50x38.10x1.95 mm (of jindal section no.4605 @ wt.1.094 kg/rmt) partly glazed 5mmt thick modi guard and partly fixed with 12mm thick exterior grade both side prelaminated sheet including rubber gasket and beading clips for glazing/ panneling and cleat angle,with expansion hold fasteners including ss expanded 0.5mm mesh for top portion necessary filling up of gaps at junction including all required materials labour and equipment as per detailed drawing as directed by engineer in charge.., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(f)75 mm., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm., providing and fixing water closet squatting pan (indian type w.c. pan) size 580mm (earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (a) vitreous china.(i) long pattern equal to white colour., providing and fixing wsh down water closet (european type, w.c. pan) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1:1 (1-cement : 1-fine sand) (seal and cover to be measured and paid for separately)(a) vitreous china pattern :(i) in white colour., providing and fixing 12.5 litres low level flushing cistern with a pair, of c.i. or mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, c.p brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(a) vitreous china (i) in white colour., providing and fixing plastic seat and cover for wash down water closer with c.p. brass hinges and rubber buffers. (b) black plastic seal and cover.., providing and fixing washbasin with single hole for pillar tap with c.i. or m.s. brackets painted white including sutting holes and making good the same but excluding fittings.(a) vitreous china:(ii) flat back washbasin 550 mm x v 400mm size. (i) in white colour.., providing and fixing kitchen sink with c.i. or m.s. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (c) vitreous china sink.(i) 600mm x 450mm x 150mm size ., providing and fixing c.p. brass waste for washbasin or sink. (a) 32mmdia.., providing and fixing c.p. brass waste for washbasin or sink. (b) 40mm dia.., providing and fixing m.i. fisher union for washbasin or sink. (a) 32mm dia.., providing and fixing m.i. fisher union for washbasin or sink. (b) 40mm dia.., providing and fixing c.p. brass shower rose with 15mm or 20mm inlet.(a) 100mm dia. each., providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixing to wooden pluge with c.p. brass screws and washers.., providing and fixing c.p. brass towel rail comlete with c.p. brass brackets fixed to wooden plugs with c.p. brass scews.(b) 600mm x 20mm size.., providing and fixing toilet paper holder.(a) c.p. brass., providing and fixing screw down bib taps of following size.(a) brass screw down bib tap polished bright. (i) 15mm dia.., providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.., c.p. angle stop cock 15 mm heavy duty with cap., providing and fixing control valve of ss or brass.(a) 25mm dia.., providing and fixing control valve of ss or brass.(b) 32mm dia.., providing and fixing control valve of ss or brass.(c) 40mm dia.., providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.., providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(iii) 32mm dia.., providing and fixing urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(a) squating plate pattern white earthenware 550mm x 300mm.., providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.., providing and fixing c.i. manhole cover 0.60 m. x 0.45m. size having weight not less than 35kg.., providing laying and jointing in true line and level 15mm dia. u.p.v.c. pipe ( sch- 40) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of cl at every two metre c/c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing laying and jointing in true line and level 25mm dia. u.p.v.c. pipe ( sch- 40) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of cl at every two metre c/c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing laying and jointing in true line and level 32mm dia. u.p.v.c. pipe ( sch- 40) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of cl at every two metre c/c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing laying and jointing in true line and level 40mm dia. u.p.v.c. pipe ( sch- 40) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of cl at every two metre c/c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing laying and jointing in true line and level 50mm dia. u.p.v.c. pipe ( sch- 40) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of cl at every two metre c/c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing and fixing pvc swr nahni trap is14735 for drain- 100mmdiameter with jali of the following nominal diameter of self cleansing design with c.i scread down or hinged grating including the cost of cutting and making good the walls., commercial plywood sheet 12 mm., commercial plywood sheet 19 mm., door closers (heavy type of 765 number) hardwire or everite prabhat or equivalent.., hinges parilamentary steel 10 cms. length.., hinges parilamentary steel 7.5 cms. length., latch (tadi) as per s le approved sectional flats (heavy) alluminium 25 cms length & 16mm dia., s.s. aldrop 20 cm long of asis 304 grade., s.s. aldrop 30 cm long of asis 304 grade., s.s. handle for door 15 cm size of asis 304 grade., s.s. pipe handle for door 30 cm size o asis 316 grade., labour charges - carpentar 1st class.., labour charges - mazdoor (male)., labour charges - mistry., labour charges - plumber (fitter)., unskilled labour., supplying and fixing 3 layer anti bacterial upvc water tank (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.., supplying and fixing upvc round lid cover for upvc/ pvc water tank top lid cover (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.(a)500 liter., supplying and fixing upvc round lid cover for upvc/ pvc water tank top lid cover (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.(b) 1000 liter., supplying and fixing upvc round lid cover for upvc/ pvc water tank top lid cover (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.(c)1500 liter., supplying and fixing upvc round lid cover for upvc/ pvc water tank top lid cover (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.(d) 2000 liter., supplying and fixing upvc round lid cover for upvc/ pvc water tank top lid cover (brand astal, syntex or equivalent) with all labour charges etc complete as directed by engineer in charge.(e) 5000 liter., supplying of upvc tee sch-80 as per direction.(a) 20mm dia., supplying of upvc tee sch-80 as per direction.(b) 25mm dia., supplying of upvc tee sch-80 as per direction.(c) 32mm dia., supplying of upvc tee sch-80 as per direction.(d) 40mm dia., supplying of upvc tee sch-80 as per direction.(e) 50mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(a) 20mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(b) 25mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(c) 32mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(d) 40mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(e) 50mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(f) 63mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(g) 75mm dia., supplying of upvc 90 degree elbow as sch-80 per direction.(h) 90mm dia., supplying of upvc 90 degree brass elbow sch-80 as per direction.(a) 20mm dia., supplying of upvc 90 degree brass elbow sch-80 as per direction.(b) 25mm dia., supplying of upvc 90 degree brass elbow sch-80 as per direction.(c) 32mm dia., supplying of upvc reducing 90 degree brass elbow sch-80 as per directon.(a) 25x20mm dia., supplying of upvc reducing 90 degree brass elbow sch-80 as per directon.(b) 32x20mm dia., supplying of upvc reducing 90 degree brass elbow sch-80 as per directon.(c) 32x25mm dia., supplying of upvc brass tee sch-80 as per direction.(a) 20mm dia., supplying of upvc brass tee sch-80 as per direction.(b) 25mm dia., supplying of upvc end cap sch-80 as per direction.(a) 20mm dia., supplying of upvc end cap sch-80 as per direction.(b) 25mm dia., supplying of upvc end cap sch-80 as per direction.(c) 32mm dia., supplying of upvc end cap sch-80 as per direction.(d) 40mm dia., supplying of upvc end cap sch-80 as per direction.(e) 50mm dia., supplying of upvc end cap sch-80 as per direction.(f) 63mm dia., supplying of upvc end cap sch-80 as per direction.(g) 75mm dia., supplying of upvc end cap sch-80 as per direction.(h) 90mm dia., supplying of upvc end cap sch-80 as per direction.(i) 110mm dia., supplying of upvc union sch-80 as per direction.(a) 20mm dia., supplying of upvc union sch-80 as per direction.(b) 25mm dia., supplying of upvc union sch-80 as per direction.(c) 32mm dia., supplying of upvc union sch-80 as per direction.(d) 40mm dia., supplying of upvc union sch-80 as per direction.(e) 50mm dia., supplying of upvc tank nipple sch-80 as per direction.(a) 20mm dia., supplying of upvc tank nipple sch-80 as per direction.(b) 25mm dia., supplying of upvc tank nipple sch-80 as per direction.(c) 32mm dia., supplying of upvc tank nipple sch-80 as per direction.(d) 40mm dia., supplying of pvc floating valve including rod and elbow, reducer etc complete.(a) 25mm dia., supplying of pvc floating valve including rod and elbow, reducer etc complete.(b) 40mm dia., supplying of pvc floating valve including rod and elbow, reducer etc complete.(c) 50mm dia., supplying of pipe clip sch-80 as per direction.(a) 20mm dia., supplying of pipe clip sch-80 as per direction.(b) 25mm dia., supplying of pipe clip sch-80 as per direction.(c) 32mm dia., supplying of pipe clip sch-80 as per direction.(d) 40mm dia., supplying of pipe clip sch-80 as per direction.(e) 50mm dia., supplying of pipe clip sch-80 as per direction.(f) 63mm dia., supplying of pipe clip sch-80 as per direction.(g) 75mm dia., supplying of pipe clip sch-80 as per direction.(h) 90mm dia., supplying of pipe clip sch-80 as per direction.(i) 110mm dia., supplying of non return valve upvc sch-80 as per direction.(a) 20mm dia., supplying of non return valve upvc sch-80 as per direction.(b) 25mm dia., supplying of upvc reducer as per direction.25x20., supplying of upvc reducer as per direction.32x20., supplying of upvc reducer as per direction.32x25., supplying of upvc reducer as per direction.40x20., supplying of upvc reducer as per direction.40x25., supplying of upvc reducer as per direction.40x32., supplying of upvc reducer as per direction.50x20., supplying of upvc reducer as per direction.50x25., supplying of upvc reducer as per direction.50x32., supplying of upvc reducer tee as per direction.25x20., supplying of upvc reducer tee as per direction.32x20, supplying of upvc reducer tee as per direction.32x25., supplying of upvc reducer tee as per direction.40x20., supplying of upvc reducer tee as per direction.40x25., supplying of upvc reducer tee as per direction.40x32., supplying of upvc reducer tee as per direction.50x20., supplying of upvc reducer tee as per direction.50x25., supplying of upvc reducer tee as per direction.50x32., supplying of upvc reducer bushing as per direction.25x20., supplying of upvc reducer bushing as per direction.32x20., supplying of upvc reducer bushing as per direction.32x25., supplying of upvc m.t.a. as per direction.(a) 20mm dia., supplying of upvc m.t.a. as per direction.(b) 25mm dia., supplying of upvc m.t.a. as per direction.(c) 32mm dia., supplying of upvc brass m.t.a. as per direction.(a) 20mm dia., supplying of upvc brass m.t.a. as per direction.(b) 25mm dia., supplying of upvc f.t.a. as per direction. (a) 20mm dia., supplying of upvc f.t.a. as per direction. (b) 25mm dia., supplying of upvc brass f.t.a. as per direction. (a) 20mm dia., supplying of upvc brass f.t.a. as per direction. (b) 25mm dia., supplying of upvc brass f.t.a. as per direction. (c) 32mm dia., supplying of upvc brass f.t.a. as per direction. (i) 25x20mm dia., supplying of upvc brass f.t.a. as per direction. (j) 32x20mm dia., supplying of upvc brass f.t.a. as per direction. (k) 32x25mm dia., supplying of elbow sdr-11 90 degree as per direction. (a) 15mm dia., supplying of elbow sdr-11 90 degree as per direction. (b) 20mm dia.., supplying of elbow sdr-11 90 degree as per direction. (c) 25mm dia.., supplying of elbow sdr-11 90 degree as per direction. (d) 32mm dia.., supplying of coupler sdr-11 as per direction. (a) 15mm dia., supplying of coupler sdr-11 as per direction. (b) 20mm dia.., supplying of coupler sdr-11 as per direction. (c) 25mm dia.., supplying of coupler sdr-11 as per direction. (d) 32mm dia.., supplying of coupler sdr-11 as per direction. (e) 40mm dia.., supplying of coupler sdr-11 as per direction. (f) 50mm dia.., supplying of tee sdr-11 as per direction. (a) 15mm dia., supplying of tee sdr-11 as per direction. (b) 20mm dia.., supplying of tee sdr-11 as per direction. (c) 25mm dia.., supplying of tee sdr-11 as per direction. (d) 32mm dia.., supplying of tee sdr-11 as per direction. (e) 40mm dia.., supplying of tee sdr-11 as per direction. (f) 50mm dia.., supplying of brass elblow cpvc as per direction. (a) 15mm dia., supplying of brass elblow cpvc as per direction. (b) 20mm dia.., supplying of brass elblow cpvc as per direction. (c) 25mm dia.., supplying of brass elblow cpvc as per direction. (d) 32mm dia.., supplying of brass elblow cpvc as per direction. (e) 20x15mm dia.., supplying of brass elblow cpvc as per direction. (f) 25x15mm dia., supplying of brass elblow cpvc as per direction. (g) 25x20mm dia.., supplying of brass tee cpvc as per direction. (a) 15mm dia., supplying of brass tee cpvc as per direction. (b) 20mm dia.., supplying of brass tee cpvc as per direction. (c) 25mm dia.., supplying of brass tee cpvc as per direction. (d) 32mm dia.., supplying of brass tee cpvc as per direction. (e) 20x15mm dia.., supplying of brass tee cpvc as per direction. (f) 25x15mm dia.., supplying of brass tee cpvc as per direction. (g) 25x20mm dia.., supplying of f.t.a. sdr-11 as per direction. (a) 15mm dia., supplying of f.t.a. sdr-11 as per direction. (b) 20mm dia.., supplying of f.t.a. sdr-11 as per direction. (c) 25mm dia.., supplying of f.t.a. sdr-11 as per direction. (d) 32mm dia.., supplying of f.t.a. sdr-11 as per direction. (g) 20x15mm dia.., supplying of m.t.a. sdr-11 as per direction. (a) 15mm dia., supplying of m.t.a. sdr-11 as per direction. (b) 20mm dia.., supplying of m.t.a. sdr-11 as per direction. (c) 25mm dia.., supplying of m.t.a. sdr-11 as per direction. (d) 32mm dia.., supplying of m.t.a. sdr-11 as per direction. (g) 20x15mm dia.., supplying of m.t.a. sdr-11 as per direction. (h) 25x20mm dia., supplying of union cpvc as per direction. (a) 15mm dia., supplying of union cpvc as per direction. (b) 20mm dia.., supplying of union cpvc as per direction. (c) 25mm dia.., supplying of union cpvc as per direction. (d) 32mm dia.., supplying of union cpvc as per direction. (e) 40mm dia.., supplying of ball valve sdr-11 as per direction. (a) 15mm dia., supplying of ball valve sdr-11 as per direction. (b) 20mm dia.., supplying of ball valve sdr-11 as per direction. (c) 25mm dia.., supplying of ball valve sdr-11 as per direction. (d) 32mm dia.., supplying of ball valve sdr-11 as per direction. (e) 40mm dia.., supplying of ball valve sdr-11 as per direction. (f) 50mm dia.., supplying of tank nipple cpvc as per direction. (a) 15mm dia., supplying of tank nipple cpvc as per direction. (b) 20mm dia.., supplying of tank nipple cpvc as per direction. (c) 25mm dia.., supplying of tank nipple cpvc as per direction. (d) 32mm dia.., supplying of tank nipple cpvc as per direction. (e) 40mm dia.., supplying of pipes clip sdr-11 as per direction. (a) 15mm dia., supplying of pipes clip sdr-11 as per direction. (b) 20mm dia.., supplying of pipes clip sdr-11 as per direction. (c) 25mm dia.., supplying of pipes clip sdr-11 as per direction. (d) 32mm dia.., supplying of pipes clip sdr-11 as per direction. (e) 40mm dia.., supplying of pipes clip sdr-11 as per direction. (f) 50mm dia.., supplying of metal cl cpvc pipe sdr-11 as per direction. (a) 15mm dia., supplying of metal cl cpvc pipe sdr-11 as per direction. (b) 20mm dia.., supplying of metal cl cpvc pipe sdr-11 as per direction. (c) 25mm dia.., supplying of metal cl cpvc pipe sdr-11 as per direction. (d) 32mm dia.., supplying of metal cl cpvc pipe sdr-11 as per direction. (e) 40mm dia.., supplying of metal cl cpvc pipe sdr-11 as per direction. (f) 50mm dia.., supplying of 3 way elbow sdr-11 as per direction. (a) 20mm dia., supplying of 3 way elbow sdr-11 as per direction. (b) 25mm dia.., supplying of tee holder sdr-11 as per direction. (a) 20mm dia., supplying of tee holder sdr-11 as per direction. (b) 25mm dia.., supplying of pvc pipes as per direction. (a) 75mm dia., supplying of pvc pipes as per direction. (b) 90mm dia., supplying of pvc pipes as per direction. (c) 110 mm dia., supplying of pvc pipes as per direction. (d) 160mm dia., supplying of pvc bend (plain) 87.5 degree as per direction. (a) 75mm dia., supplying of pvc bend (plain) 87.5 degree as per direction. (b) 90mm dia., supplying of pvc bend (plain) 87.5 degree as per direction. (c) 110 mm dia., supplying of pvc bend (plain) 87.5 degree as per direction. (d) 160mm dia., supplying of pvc bend (door) 87.5 degree as per direction. (a) 75mm dia., supplying of pvc bend (door) 87.5 degree as per direction. (b) 90mm dia., supplying of pvc bend (door) 87.5 degree as per direction. (c) 110 mm dia., supplying of pvc bend (door) 87.5 degree as per direction. (d) 160mm dia., supplying of pvc bend 45 degree as per direction. (a) 75mm dia., supplying of pvc bend 45 degree as per direction. (b) 90mm dia., supplying of pvc bend 45 degree as per direction. (c) 110 mm dia., supplying of pvc bend 45 degree as per direction. (d) 160mm dia., supplying of pvc cross tee (plain) as per direction. (a) 75mm dia., supplying of pvc cross tee (plain) as per direction. (b) 90mm dia., supplying of pvc cross tee (plain) as per direction. (c) 110 mm dia., supplying of pvc cross tee (plain) as per direction. (d) 160mm dia., supplying of pvc single y (plain) as per direction. (a) 75mm dia., supplying of pvc single y (plain) as per direction. (b) 90mm dia., supplying of pvc single y (plain) as per direction. (c) 110 mm dia., supplying of pvc single y (plain) as per direction. (d) 160mm dia., supplying of pvc single y (door) as per direction. (a) 75mm dia., supplying of pvc single y (door) as per direction. (b) 90mm dia., supplying of pvc single y (door) as per direction. (c) 110 mm dia., supplying of pvc single y (door) as per direction. (d) 160mm dia., supplying of coupler as per direction. (a) 75mm dia., supplying of coupler as per direction. (b) 90mm dia., supplying of coupler as per direction. (c) 110 mm dia., supplying of coupler as per direction. (d) 160mm dia., supplying of reducing tee (plain) as per direction. (a) 90x75mm dia., supplying of reducing tee (plain) as per direction. (b) 110x75mm dia., supplying of reducing tee (plain) as per direction. (c) 160x110mm dia., supplying of solvent for pvc pipe as per direction. (a) 110mm dia., supplying of solvent for pvc pipe as per direction. (b) 250mm dia., supplying of solvent for pvc pipe as per direction. (c) 500mm dia., supplying of solvent for pvc pipe as per direction. (d) 1000mm dia., supplying of solvent for pvc pipe as per direction. (e) 5000mm dia., supplying of heavy duty pvc-u solvent cement (above 50mm) as per direction. (a) 115mm dia., supplying of heavy duty pvc-u solvent cement (above 50mm) as per direction. (b) 237mm dia., supplying of heavy duty pvc-u solvent cement (above 50mm) as per direction. (c) 473mm dia., supplying of pvc-u solvent cement for swr as per direction. (a) 237mm dia., supplying of ss round (katori) for bib tap, bib cock etc as directed.., supplying of chair brecket for wall hung fitting etc as directed.., supplying of ss rack bolts etc as directed.., supplying of ss / brass cp nipple as directed.., supplying of teflon tap roll as directed., providing and fixing 20x20 cm (squre/round) shower with 30 to 45 cm 25mm dia ss pipe with neccessery fixturs and fastners & labour charge as per design by (instruction by) engineer in charge.., providing and fixing stainless steel (s.s.) nipple disk etc complete as directed by engineer in charge.., providing and fixing 30cm long & 40 cm dia round two in one (hot & cold couetion pillar cock with labour charges etc complete as directed by engineer in charge.., providing and fixing diverter with spout crome finish make jaquar / esco or equivalent brand with necessary inner part fixutes and fastening etc complete as directed by engineer in charge.., providing and fixing flush cock for urinal with necessary fixtures and fastening with all labour charges etc complete as directed by engineer in charge.., providing and fixing urinal fitting for brand jaquar/ cera/ hindware / plumber (brand) or equivalent brand white etc complete as directed.., providing and fixing 0.60 mm thick zink coated galvanised metal sheet roofing galvalume sheet on existing structure by using hilty corroshied s.d.s.y.t. screws rubber gasket & silicon sealent as directed by engineer in charge etc complete.., providing and fixing ss mosquito net with 20mmx 4mm thick with in wooden window shutter jali of 0.71 mm to existing grill of window or varandah incl. gap filling around edges with wooden patti or any suitable means & necessary fixtures and fastenings as per instruction of engineer in charge., providing and fixing ventilaton in mosquito net with alluminium frame size 40x20 mm including all fixutuers & fastener etc complete.., removing old glass of aluminum window shutter refixing new 5mm thick tinted/clear glass with new epdm 15mm thick black rubber with other necessary fixtures and fastening with all labour work etc complete as directed by engineer in charges.., providing and fixing both side (pair) 60cm long ss telescopic soft channel rail for trolley basket including necessary fixtures and fastening etc complete as per instruction of engineer in charge.., providing,fixing & installation heavy duty mortise lock best and approved quality as directed by engineer in charge.., providing and aluminium composite panel of alstrong or euivelent brand with approve shade of 3 mm thick, the composit panel should be made opf 3mm thick 100percent virgin polythene core of lpde sand witched between two skins of aluminum sheet of whicj one side is having three layers of pvdf coating with kyanar 500 paint to ensure the supprior corrosion resistance and weatherability and the other side is service coated with epoxy paint (grey). the adhesive used dubond for bonding the two skins which can take 8 to 9 kg. of weight to seperate as directed by engineer in charge.., providing and repairing, old wooden chair with melamine polishing work, removing of old polish and cleaning all dust, dirt, and debries by sandpaper & applying fresh polish to evenly match every wood surface. the cost include costs for all materials, labour charges with cushhion cover (gadi cover) with good quality cloth tapestry cover etc complete as directed by engineer in charge.., providing and fixing shop disk etc complete as directed.., providing and fixing stainless steel shop stand 0.30 meter long with ss railing by engineer in charge with fixing and fastening of labour charges etc complete as directed.., chair repairing like seat & back,leg,revolving mechanisam with screws, bolts, nails, polish with replacement of non-working parts & labour charges etc complete as directed by engineer in charge.., providing and fixing corner glass (12x12) with ss railing by engineer in charge with fixing and fastening of labour charges etc complete as directed.., s.s signagesproviding & fixing s. s. plate signages having size as per requirement having 1.2mm thick name plates with matt finish buffing process of 304 grade mentioning officers names/designations etc. the quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. as per choice of users department and concern officers in charge as directed by the architect/engineer.., providing and fixing in position 300 mm high english letters made from 1.0 mm thick stainless steel sheet as directed by engineer-in-charge with all necessary tools & plants etc. complete.., providing and fixing in position 150 mm high, english letters made from 1.0 mm thick stainless steel sheet as directed by engineer-in-charge with all necessary tools & plants etc. complete.., providing and fixing health fauset heavy duty with hook with fitting.., providing and fixing heavy handle valve of aprroved brand & follwing internal dia of brass including fixing in pipe lines etc.complete (a) 15 mm dia.., roller blindsproviding and fixing roller blinds of the following specifications: the drive unit shall be made up of moulded plastic with steel spring support & inserted into the tube and it shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left side of the shade. the shade when lowering and rising, shall be automatically locked in position upon release of the ball chain by means of a buildup in friction lock. the end plug shall be moulded of plastic with a steel location pin. the plug shall be inserted into the tube end. (opposite to the driver unit) the support brackets shall be of coated steel & provided with covers and used in right hand positions deffirentiated by the acceptance of the rectangular drive unit support or round ldler plug pin. the roller tube shall be of extruded aluminimum with 38mm internal diameter & skin thickness of 1mm & shall incorporate a key way integral with the tube to accommodate the spline. the outside diameter shall be 40mm,the bottom rail shall be stiffening inserted into bottom rod pocket. the material may be timber, pvc covered steel tube or vb bottomrail. the ball chain should be of 2mm diameter cord with 4.5 mm diamater acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain, which is used for raising or lowering action of the shades. ect , complete as per manufacturers specificatioons, detailed technical specification and as per eic/architect. the fabric shall be as per selection from approved make vista / neon. the quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installation. as per choice of users department and concern officers in charge as directed by the engineer in charge. ., cloth curtains providing and fixing cloth curtains of cotton or semi-cottton fabric with three plated or ring type curtain pattern .with the basic rate of fabric 450 per sq.mt. the fabric with backing cloth (black out) and 25mm od 1.2mm thickness-304 grade mate finsih ss rods & ss.cl s, with necessary other fixture and fastening etc. the quoting price should be inclusive of all types of taxes & duties, packing, forwarding, loading, unloading, installation. as per choice of users department and concern officers in charge as directed by the engineer in charge. ., zebra blindsproviding & installation zebra blinds, assemblies are to be supplied and installed in all windows with great precision. it should be water resistant and fitted on aluminium handrails duly powder coated and fitted with stainless steel drives rods etc. the quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installation. as per choice of users department and concern officers in charge as directed by the engineer in charge. ., providing & fixing granite takti with black granite with computerised golden colour letteing fixng in wall with necessary fixture & fastening of polishing work etc complete ., providing and fixing acrylic sheet name plate / takti as per direction of engineer in charge etc. compl. ., providing and fixing heavy duty floor spring of isi mark as approved by engineer in charge in existing alluminium duble door shutter including refitting & other labour charges etc. as per requirement as directed by engineer in charge. ., providing and laying pavit granit / pavit granulato or as equivalent as approved by engineer - in - charge of the size 300 mm x 300 mm x 10 mm coloured matt finished antiskid tile of approved colour and shade in flooring over 30mm average thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over and jointed with grey cement slurry, etc complate.., supplying and fixing sfrc (steeel fiber reinforced concrete ) m.h jali /cover with frame of 20 mt load capacity as per i.s 12592 part -i & ii .the size of frame and cover/jali size 2x2 feet2 and also dismentaling existing frame and cover including loading and unloading etc completed., providing and fixing jaqure prs-073 auto closing concealed urinal flush valve (25 to 32mm dia )with wall flange for urinal etc complete. ., providing and fixing jaqure flv-1093nsq metropole flush valve regular 40mm size (concealed body) with exposed shut off provision & 100mm square plate etc complete.., providing and fixing bib cock of jaquar kup-35037pm with wall flange etc complete.., providing and fixing 15 mm diameter solo chromium plated angular shape bib cock with wall flange of the make jaquar kup-35037pm or equivalent as approved by engineer in charge. ., providing and fixing full length beveled wall mounted water resistant mirror rectangular unframed 5 mm thick mirror of approved quality and make size 1200x600 mm with moulding edge and fixing on wall with c. p.brass studs by using transperent silicon sealnt at periphery etc. complete. for all floor., providing and fixing anodized alluminum partly glazed & partly panelled door having frame section of of size 63.50mm x 38.10mm x 1.70mm having wt. 0.911 kg/rmt. with section embedded with non-teak member, shutter section having styles & top rail 47.62mm x 44.45mm x 1.74mm having wt. 0.881 kg./mtr. middle rail of size 49.91mm x 44.45mm x 1.60mm having unit wt. 0.882 kg./mtr. & bottom rail of size 95.25mm x 44.45mm x 1.70mm having unit wt. 1.30 kg. / mtr. top panel of 5mm thick tinted float glass or 12mm thick both side pre-laminated particle board and bottom panel of 12 mm thick both size laminated interior grade particle board shutter with steel hinges, door closer, mortice lock, handles and necessary fixtures and fastenings, etc. complete.., providing cinder filling in sunken floors including watering, consolidating, ramming complete., providing composite water proofing treatment to floor and providing and laying synroof high bond ecentromentric premium quality acrylic coating as a water proofing membrance finished which consists of a coat of bitumine primer & 80 csm membrance in sunk slab with ulraviolet resistance and working upto any height etc. complete as directed by engineer in charge., providing and fixing concealed center point to wall ceiling & floor cpvc (sdr 13.5) pipe having national sanitation foundation (nsf) seal for potable water of following dia. nominal bore tube fittings and cl s including making good the wall, ceiling and floor etc. omplete. [c] 25 mm.., providing and fixing concealed center point to wall ceiling & floor cpvc (sdr 13.5) pipe having national sanitation foundation (nsf) seal for potable water of following dia. nominal bore tube fittings and cl s including making good the wall, ceiling and floor etc. omplete. [b] 20 mm.., providing and fixing concealed center point to wall ceiling & floor cpvc (sdr 13.5) pipe having national sanitation foundation (nsf) seal for potable water of following dia. nominal bore tube fittings and cl s including making good the wall, ceiling and floor etc. omplete. [b] 32mm.., providing and fixing concealed center point to wall ceiling & floor cpvc (sdr 13.5) pipe having national sanitation foundation (nsf) seal for potable water of following dia. nominal bore tube fittings and cl s including making good the wall, ceiling and floor etc. omplete. [b] 40mm.., providing and fixing concealed center point to wall ceiling & floor cpvc (sdr 13.5) pipe having national sanitation foundation (nsf) seal for potable water of following dia. nominal bore tube fittings and cl s including making good the wall, ceiling and floor etc. omplete. [b] 50mm.., providing, laying and jointing in true line and level 160 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubbering ,& fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipes hall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc cl of the size 160mm diameter x210mml engthx 196mm heigh at every 2000mm center to center or shall be concealed in wall sas directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointedwith adhesive solvent cement including cost of all materials., providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc cl of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials., providing and fixing stainless steel / brass zolato handle valve for regulate the flow of 25 mm diameter of the make zolato or equivalent as approved by engineer in charge. ., providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo,flooring and pllars laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry including rubbing & polishing etc. complete.., providing and fixing jaquar kup-35053pm angular stop cock with wall flange., providing and fixing jaqure ald-577 hand shower (health faucet) with 8mm dia, 1.2 meter long flexible tube & wall hook with n.r.v (back flow preventer)., providing and fixing jaqure pillarcock prs-043 bib cock auto closing system with built-in control cock with wall flange., supplying 18 mm dia round s.s.lock for cup boards and drawers with two keys make of ebco or equivalent brand aproved by engineer in charge., providing and fixing bird control nylon anti-bird net uv stabilized nylon net to various opening like window,ventilators, duct at various height by using jula etc complete. including necessary material and labour.., provding and fixing s.s. handle for door/ window/cupboard 10 cm size of asis 304 grade ., providing and fixing plastic dust bin upto 10 liter having top cover incl close/open mechanism by pushing etc complete.., supplying and placing rcc pre-cast garden bench with back rest and without arm-rest as per drawing etc complate including transporation and all.., waste pipe for wash basin c.p. 32 mm dia., re-fixing pre-cast rubber dye/steel dye inter locking concrete block 60mm thick with grade of concrete m300 pnumatic compressed /vibrated mechanically and as per approved design confirming to is15658:200 6 including 35mm sand layer for levelling and filling the joint with sand in proper line and level as per guidline so f irc:sp63 2018 etc. complete.., providing and fixing wooden partition consisting frame work of wooden patti 35 x 75 mm at 600 mm center to center both ways and 12 mm bwp ply on both side including making opening for electric fixture and necessary frame work for door if any including fixing in line and level with all the necessary fixture and fastening etc complet as directed by engineer in charge. ., providing and fixing 35 mm thick single shutter flush door with 1.0 mm thick pattern lamination on both side, three coat of oil painting to sides of shutter using two nos os pull handles in satin finish of the size 19 mm diameter, 150 mm long made from anticorrosive high grade aisi 316 stainless steel satin finish of the make kich / d-line / gaze as approved by engineer - in - charge including one number of 10 mm diameter 10 long anticorrosive high grade aisi 304 stainless steel tower bolt in satin finish of the make arch / d-line / ozone as per approved by engineer in charge, three numbers of anticorrosive high grade aisi 304 stainless steel hinges of size 102 mm x 76 mm x 3 mm of the make kich / ozone / d-line as per approved by engineer in charge and anticorrosive high grade aisi 316 stainless steel, 10 mm diameter x 250 mm long aldrap in satin finish of the make arch / ozone / d-liner including stregthning the granite jambs & soffit by means of anchor bolts by drilling hole in the granite prior to fixing door as per instruction & approved by engineer in charge and one number of s.s. cylindrical magnetic door catch etc. complete as per detailed drawing.., providing and fixing approved quality lamination sheet 1 mm thick of durian, sundeck , century or equivalentincluding cutting and fixing as per pattern & colour combination as approved by engineer in charge including all fixture and fastening etc complete..., providing and fixing 12mm toughen glass for office table having moulded quater edge all around and made two hole for cabling and utility etc having size equal to the table as per the instruction by engineer in charge.., supplying and erecting cpvc ball valve at position with necessary material for following size of pipe diameter. 25 mm., supplying and erecting cpvc ball valve at position with necessary material for following size of pipe diameter.40 mm., providing and fixing 20 to 25 inch long stainless steel braided flexible heavy duty geyser connection pipe of havells, cera or equivelent as approved by engineer-in-charge. suitable for both hot and cold water.including necessary fitting with tap line and geser with existing cpvc or pvc line including cutting, fitting and etc. complete.., reparing of plastic water tank including stiching and leakage proof etc. compelate including neccesary plumbing work required for dismetling and refitting of tank for repairing.., proding julla structure for height up to 15th storey building with labour and all arrangement for outside reparing work etc. directed by engeer in charge.., repairing of existitng curtain by providing its operating mechanis and making smooth for operation incl required replacing fabric and labour, material etc complete. ., repairing of existitng rolling shutter up down mechanism and gear box with all necessary fastening and fixture etc complete. ., providing and fixing bib taps make pearl approved by engineer in charge, of following size.(a)p.t.m.t. (polytetra methylene terephthalate) bib tap polished bright. (i) 15mm dia.., providing and fixing pillar tap, of p.t.m.t. (polytetra methylene terephthalate) make pearl as approved by engineer in charge, (i) 15mm dia.., providing laying and jointing in true line and level 100mm dia. u.p.v.c. pipe ( sch- 80) for cold water including all fittings as approved by engineer in charge, including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing and laying and jointing in true line and level 80mm dia. u.p.v.c. pipe ( sch- 80) for cold water including as approved by engineer in charge, including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.., providing and making saw cutting in cement concrete (cc) road/pavement using mechanical cutter fitted with diamond blade, to the required depth and width, including marking of cutting lines, cutting in true line and level, maintaining straight alignment, providing continuous water cooling during cutting, removal of slurry/debris, and disposal of unserviceable material, and all incidental works, complete in all respects, as directed by the engineer-in-charge.., repairing of existing wooden cupboard / office table including dismantling of damaged or defective parts wherever required; replacement or repair of components such as hinges, locks, handles, drawer channels, shutters, and panels; tightening of loose joints; minor carpentry work; replacement of damaged plywood/laminate portions; edge polishing/finishing; reassembling and proper fixing in position; cleaning and making the furniture fully functional, complete in all respects as directed by the engineer-in-charge.., providing and fixing approved quality lamination sheet 1 mm thick of durian, sundeck , century or equivalentincluding cutting and fixing as per pattern & colour combination as approved by engineer in charge including all fixture and fastening etc complete..., providing and fixing wash down wall hung water closet(european type) sls-wht-0117 of jaquar or kolher k-8752in-s or cera croma pan with integral p trap jointed within c.i pipe in c:m 1:1 including matching seat cover, chair braket, conceled metropole of jaquar flv-chr-1093 or cera cm 102 or hindware f850029, 2 way bibcock of jaquar flr-chr-5041n or cera cq406 or k-37320in-4, health foucet / jet spray of jaquar ald-chr-573 or cera cg205 or kohler k-12925in with 1 m extension pipe, toilet paper holder of jaquar acn-chr-079 or cera ca 102 or kohler k-10705d with all accessories etc. complete.., providing and fixing urinals cera cat no: s4020102 or urs-wht-703 of jaquar or cera urinal 5013 or kohler k-5017in-er with flush valve jaquare prs-073 (pressmatic) and integral drain pipe jointed within c.i pipe in c:m 1:1, conceled cock, all accessories etc. complete.., providing and fixing cera cat no. s2030105 (carat) / hindware (armada) / parryware (walvit pan c0264) / duravit (220090000) or as equivalent made wash basin counter size 0.90 x 0.60m or require as per drawing using 18mm thick black shade polished granite for top with 2 no. of c.i. heavy brecket with 1 no. of wash basin pillar cock jaquar brand florentine cat no- 5011n or cera columbia or kohler k-17156k, c.p. brass jaquar flr-chr-5021n or cera cq 430 or kohler k-16312in-4 or equivalent, angle valve jaquar brand florentine cat no- 5053n flr-chr-5053n or cera cq 408 or kohler k-11566in-7, c.p. brass extension nipple 62mm long, s.s. flange water super connection pipe 60cm. long and full thread waste coupling includingm, bottle trap making hole in granite for wash basin etc. complete.., providing and fixing wall mounted u shaped hinged hand rail 600 x 100 mm of cera cat no. b2210107 or jaguar or hindware or equivallent branded company with all fixin acessories etc complete at location specified for accessible toilet as per approval of engineer incharge with all lead and lift., providing and fixing wall mounted inverted ‘l shaped grab bar with 500 and 700 mm long bars of cera cat no. b2210103 or jaguar or hindware or equivallent branded company with all fixin acessories etc complete at location specified for accessible toilet as per approval of engineer incharge with all lead and lift, providing and fixing wall mounted grab bar 600 mm long of cera cat no. b2210106 or jaguar or hindware or equivallent branded company with all fixin acessories etc complete at location specified for accessible toilet as per approval of engineer incharge with all lead and lift., providing and fixing urinal wall mounted u shaped grab bar 600 mm long of cera or jaguar or hindware or equivallent branded company with all fixing acessories etc complete at location specified as per approval of engineer incharge with all lead and lift., painting or drawing or sketching logo/ image/drawing work, road marking for disable parking or any art which is non washable type and having long durable nature on rcc or any purpose like specially able person parking or any other needs as per recent government standards and norms with all material, colours, tools and plants and as per instruction and approval of engineer incharge with all lead and lift. ( this item not incuding rangoli or simillar art in which many colors may used )., providing & fixing sinage and name boards with acrylic plate material by using 5 mm plain acrylic plate as base and lesser cutted character cloured letters printing at bottom including sandwiching, fixing in line and level with fixture and fastner as per design given by engineer in charge., providing and fixing butly adhesive pu tectile 300 x 300 mm or as per required size, road marking for disable parking or any other which is non washable type and having long durable nature on rcc or any purpose like specially able person parking or any other needs as per recent government standards and norms with all material, colours, tools and plants and as per instruction and approval of engineer incharge with all lead and lift., credit of dismentaled brass/steel bib tap, pillar cock, stop cock etc, credit of dismentaled door window etc in any conditon., credit of dismentaled ventilation etc in any condition, credit of dismentaled door closer in any condition, credit of dismentaled and usable good condition of sanitary fittings like wash basin, wall hung, european pan etc., credit of dismentaled sink in any condition, credit of dismentaled all type of steel & roofing sheet in any condition, credit of dismentaled cvpc/upvc/pvc valve in usable good conditon only., credit of dismentaled water tank in any condition etc., credit of dismentaled roller blinds, cloth certain, zebra curtain in usable good condition., credit of dismentaled cvpc/upvc/pvc any dia pipe in any condition.
|
