Supply Of One Rake set of Hardware (Group-2) => Limited in India

Work Detail

Supply Of one rake set of hardware (group-2) , one rake set of hardware (group-2) for vb/ts consists of 1.hexagon socket head ca p screw iso 4762- m10 x 40-10.9 -16nos see note-1,2 2.hexagon socket head cap screw iso 4 762- m8 x 25-8.8 -144 nos see note-1,2 3.hexagon socket countersink head screw- iso 1064 2-m12 x 80-8.8 -256 nos see note-1,2 4.fit bolt din 609-m16x2x80 - 10.9 -256 nos see note-1,2,3 5.washer - iso 7089 - 10 -300 hv -256 nos see note-1 6.washer - iso 7089 - 12 - 300 hv-1848 nos see note-1 7. washer - iso 7089 - 14 - 300 hv -512nos see note-1 8. washer - iso 7093 -1-12- 30 0 hv -136nos see note-1 9. washer - iso 7089 - 22 - 300 hv -512nos see 10. washer - iso 7089 - 24 - 300 hv -960nos see note-1 11. washer- iso 7089 - 20 - 300 hv -1920 nos see note-1 12. was her -iso 7089 - 16 - 300 hv -2916 nos see note-1 13. washer -iso 7089 - 33 - 300 hv -256 nos see 14.washer - iso 7089 - 36 -300 hv -256 nos see note-1 15. washer - iso 7093 - 1 -16 -300 hv -76 nos see note-1 16.split pin -iso 1234-8 x 45-st -128 nos see 17.split pin -iso 1234-8 x 63-st -256 nos see note-1 18. parallel pin is 6689/iso 8734-10x24-a-st -128 nos see note-1 19.hexagon h ead screw plug din 910-m20 x 1.5-st -72nos see note-1 20.split pin iso 1234-6.3 x 40-st -64nos see 21.gasket din 7603-a 21 x 26-cu-72nos note: 1. zinc flake coating (geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant .minimum salt spray test life of 1000 hours is to be ensured. 2. fit bolt shall have coarse thread with 2 mm pitch. 3. bolts & screws (other than 8.8 property class) shall be of make / brand tvs or unbrako . bolts & screws may be sourced from m/s lps bossard also. 4. bolts & screws (with 8.8 property class) shall be of make / brand tvs or dfl/unbrako.bolts & screws may be sourced from m/s lps bossard also. 5. zinc electroplated to grade a3l of annex-e of is: 1367 (part eleven.) special condition : there will be minor modification in design, firm may be advised to collect final list before su pplying. suitable packing to be done to avoid damage during transit and unloading. ite m to be packed separately labeled with description and quantity and to be supplied in r ake set. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Contact Information