|
Tender for Supply & Installation Of Hostel Furniture At Forest Training Institute, Hatipara For Upgradation Of Training Institute Infrastructure Under Element Project. , Desklet Chair , Seat / Back Assembly : The Seat Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Mesh Fabric (Refer Colour Chart For Seat & Back Upholestry In Product Catalog). Seat Size : 50.0Cm. (W) X 48.0 Cm. (D). Back Size : 53.0 Cm. (W) X 39.0Cm. (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/M³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression. M.S. Powder Coated Frames For 4 Leg Chairs :The Powder Coated ( Dft 50±10 Microns) Welded Tubular Main Frame Is Made From Ø 2.54 ± 0.03 Cm X 0.2 ± 0.016 Cm And Ø1.6±0.3Mm X 0.16 ± 0.0128Cm M.S. E.R.W Tube. The Ø1.9 ±0.3Mm X 0.12 ±0.0096 Cm M.S.E.R.W. Tube Used As Connecting Member Between Lh & Rh Frames. Desklet Support Frame Is Made From Ø 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And Welded To Main Frame. Armrest : The Armrest Are Made Of Glass Filled Polypropylene Compound And Assembled Over The Tubular Frame. Full Desklet: The Full Desklet Is Made Of 1.3 ±0.02Cm. Thk. Compact Laminate Board. Desklet Has Front And Back Adjustment Of 4.0 Cm ±0.5 Cm. Outer Dimension: 59.5±0.1Cm. (W) X 29.0±0.1Cm. (D). Wire Tray: The Paper Tray Is Made Of Ø 0.5 +0/-0.005Cm. M.S. Rod Which Is Welded To Form A Mesh-Type Structure. It Is Powder Coated ( Dft 50± 10 Microns ). It Will Retro Fit To Relax With Desklet Chair. Chair. Size: 40.5Cm. (W) X 29.8Cm. (D) X 18.0 Cm (H). Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Fixed Chair With Arm , The Seat And Back Are Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size:47.5 Cm. (W) X 58.0 Cm. (H).Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D).The Polyurethane Foam Is Moulded With Density = 45±2 Kg/M³ And Hardness = 20±2 At 25% Compression. The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.The Powder Coated Tubular Frame Is Cantilever Type & Made Of Dia 25.4Mm X 2Mm Thk M.S. Er.W. Tube. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Trainers Table, Size: 1350 (W) X 600 (D) X 750 (H) Mm. , Worksurface:Made Of 25 Mm Thick Mdf-One Side Pre-Laminate Board Confirming To Is-14587:1998With 0.4 Mm Pvc Membrane Pressed On To Top.Gromet Provided On Work Surface For Wire Management.Modesty Panel:Made Of 25 Thick Mdf-One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Understructure: Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990,Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage:Made Of 25 Mm Thick Mdf-One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security. Size: 1350 (W) X 600 (D) X 750 (H) Mm. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Secretariat Chair , The Seat And Back Are Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size:47.5 Cm. (W) X 69.5 Cm. (H).Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D).The Polyurethane Foam Is Moulded With Density = 45±2 Kg/M³ And Hardness = 20±2 At 25% Compression. The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.The Mechanism Is Designed With The Following Features:360° Revolving Type.Upright Position Locking.Tilt Tension Adjustment.Seat/Back Tilting Ratio Of 1:3 (6° Seat Tilt/18° Back Tilt).The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 Cm.The Bellow Is 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.The Pedestal Is Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3Cm. Pitch-Center Dia. (76.3 Cm With Castors).The Twin Wheel Castors Are Injection Moulded In Black Nylon. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Secretariat Table, Size: 1800 (W) X 900 (D) X 750 (H) Mm. , Table Top:25 Mm Thick Pre-Laminated Board With 2 Mm Thick Matching Lipping Stiffener Provided Under The Top To Give Additional Strength (1.6 Mm Thk. Ms).Understructure:The Pedestal Is A Combination Of Processed Wood And Mild Steel.2 Box Drawers+1 Filing Combination For Both Pedestals.Pedestal Shall: 0.8 Mm Thk Ms.Drawer Tray:0.6 Mm Thk Ms.Drawer Separator:0.6 Mm Ms.Pedestal Bottom Cover:0.6 Mm M.S.Plb Drawer Fronts To Match Top Colour.Drewers Mounte On Double Extension Steel Telescopic Ball Slides To Give Full Access To Drawer.Separators Provided In Box Drawers To Compartmentalize Space To Sult Individual Requirements.Sleek Handeles For Easy Grip.Glide Screws For Leveling.Indepandent Locking Arrangement For Each Pedestal.Modesty:Ms Panel Recessed Inside For More Leg Room.Panel Is Styled With Cutouts To Give It A Trendy And Up Market Look. Size: 1800 (W) X 900 (D) X 725 (H) Mm. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Table For Trainers, Size: 900 (W) X 590 (D) X 750 (H) Mm. , Worksurface: 18 Mm Thick Pre-Laminated Board.All Worksurface Edges Are Duly Sealed With 2 Mm Thick Pvc Beading.Understrucure:C-Frame Crca Ms Sheet Of 0.9 Mm Thick.Tubular Frame Ms Erw Square Tubes 25.4 Mm X 25.4 Mm X 1.2 Mm Thick.Modesty Panel 1.0 Mm Thick Crca Ms Sheet.Drawer Unit Shell 0.5 Mm Thick Crca Ms.Drawer Tray 0.6 Mm Thick Crca Ms.Drawer Front 0.8 Mm Thick Crca Ms Sheet.Drawer Slides Friction Slides Of 1.2 Mm Thick Crca Ms.Lock 6 Lever Brass Lock.Handles Bult In Plastic. Size: 900 (W) X 590 (D) X 750 (H) Mm. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Chair For Trainees , The Seat And Back Are Made From 1.0Cm Thk. Hot Pressed Water Resistant, Commercial Plywood Upholstered With P.U. Foam And Fabric.Back Size:42.0Cm. (W) X 27.0Cm. (H).Seat Size:42.0Cm. (W) X 42.0Cm. (D).The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M³ And Hardness = 20 +/- 2 Kg. On Hampden Machine At 25% Compression.The Assembly Is A Mainframe Made Of Dia. 2.54Cm. (1) X 14 Bg M.S.E.R.W. Tube And A Welded Leg Tube Made Of Dia. 2.54Cm.(1) X 18 Bg M.S. E.R.W. Tube To The Form The Complete Assembly Which Is Black Powder Coated. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Single Bed With Mosquito Stand , Type Of Metal Bed: Metal Bed With Headboard Only. Size Category Of Metal Bed: Single. Overall Length Of Bed (In Mm): 1950 - 2000 Mm. Overall Width Of Bed (In Mm): 900 - 1050 Mm (3 To 3.5 Ft). Overall Height Of Bed From Installation Level (In Mm): 550 - 600 Mm. Availability Of Headboard: Yes. Material Of Bed Frame (Including Legs): Mild Steel. Type Of Bed Mattress Support: Cross Beams - Horizontal & Vertical Combo. Material Of Bed Mattress Support Panel: Mild Steel. Material Of Bed Headboard Frame: Mild Steel. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Minor Almirah With Locker , Product Size: 900Mm(W) X 507Mm(D) X 1372Mm(H). Construction & Material: Aesthetically Appealing Slim Line, Completely Knock Down Construction. Removable Skirting To Cover Integral Legs. Legs Fitted With Screw Type Leveler. Made From Combination Of Crca 0.8 Mm & 0.6 Mm Thickness. Main Door: Steel Hinged Door. Main Door Locking / Handle: Handle & Base Aesthetically Appealing, Ergonomic, Flush With Door Made Of Mazak. 3 Way 90 Degree Removable Key Type Cam Lock & Locking Mechanism. Locker Door & ItS Locking: Fixed Half Locker On Rh Side. Hinged Door. 2 Way Cam Lock With Knob Type Handle. Hanging Rod: 1 Nos. Half Length Hanging Rod - On Left Half Of Partition Below Top Shelf - Mounted On Snap-On Type Plastic Brackets. Finish: Epoxy Powder Coated To The Thickness Of 50 Microns (+-10). Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Single Matterss , Number Of Layers: Three Layers. Thickness Of Top Layer (Tolerance :- ± 2 Mm): 25 Mm. Material Of Top Layer: Pu Foam. Material Of Bottom Layer: Pu Foam. Top Layer Density: 28 Kg/M³. Core Layer 1 Density: 28 Kg/M³. Bottom Layer Density: 28 Kg/M³. Quilting: Both Side Quilting (Double Sided). Thickness Of Quilting (± 2 Mm): 16 Mm. Mattress Top: Box Top. Mattress Cover Fabric Composition: 80% Polyester And 20% Cotton Blended. Warranty (In Years): 1 Year. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Dining Table 6 Seater , Work-Surface:25 Mm Thick Base Material 25 Mm Mdf Board.On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart Combination Color Graphics On The Centre.Color As Per Color Chart.Brown Laminate On Bottom.Specially Profiled Edge For Comfort.Understructure:Bend Pipe Understructure Of M.S.Powder Coated.Pipe Dia 38 Mm,2 Mm Thk,Understructure Fitted With Top By Ss Machine Screws.Legs:Ms Powder Coated Legs For Pu Top.38 Mm Dia Pipe Legs Are Fixed With Understructure And Table Top.Glide:Plastic Glide Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking. Size: 1734 (W) X 1175 (D) X 750 (H) Mm. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre. , Dining Chair , The Seat And Back Are Made Up Of Injection Moulded High Impact Strength Polypropylene Polymer Compound With Indoor Grade Uv Resistance.Seat Size:52.5 Cm. (W) X 53.2 Cm. (D).Back Size: 51.6 Cm. (W) X 40.5 Cm. (H).The Powder Coated Welded Tubular Frame Is Made From Ø 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm M.S. E.R.W. Tube.The Shoes Are Made Of High Impact Strength Polypropylene Polymer Compound With Indoor Grade Uv Resistance And Pressed Fitted With Tubular Frame. Manufacturer Should Have Bifma Member Certificate (Ansi/Bifma - Level® 2), India Design Mark Certificate, Green Guard (Certificate From Ul) , Green Pro , Griha, Indoor Advantage Certification Along With Products Certifications Like; Aiota, Furniture Sustainability Standard Issued By Bifma - Ansi/Bifma - Level® 2 . Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 (Tuv) Is Mandatory. Any Other Green Guard Certificate Other Than Ul Shall Be Rejected. Manufacturer Should Have Green Guard (Certificate From Ul), Bifma , Green Pro, Griha,Iaq Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From (Tuv) Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. Supplier Should Have Local Service Centre.
|
