Tenders Are Invited For Lighting Equipment And Electric Lamps – City Of Bělá Pod Bezdězem – Reconstruction O ... in Czech Republic

Work Detail

Lighting Equipment And Electric Lamps – City Of Bělá Pod Bezdězem – Reconstruction Of Public Lighting. The Subject Of The Public Contract Is The Reconstruction Of The Existing Public Lighting (Hereinafter Referred To As Vo) To Improve The Quality Of Lighting On Roads Located In The City And Reduce Light Pollution And The Energy Consumption Of The System. Public Lighting In The City Of Bělá Pod Bezdězem Is Technically And Morally Obsolete In Its Default State. 621 Light Points With A Total Installed Power Of Approx. 16.4 Kw Are Operated In The Addressed Part, While The System Uses A Combination Of Sodium Discharge Lamps, Older Types Of Lamps And Non-Uniform Led Lamps Without Central Regulation. The System Is Energy Inefficient, With A High Consumption Of Electricity And A Limited Ability To Control Traffic. The Technical Condition Of Some Of The Lights, Booms And Masts Is Unsatisfactory, In Some Places At The Limit Of Their Service Life. In Addition, The System Is Burdened By Non-Optimally Sized Main Circuit Breakers In Vo Switchboards, Which Increases Fixed Payments For Distribution. The Existing Solution Also Insufficiently Limits Light Pollution And Does Not Meet The Current Requirements For The Quality, Efficiency And Sustainability Of Public Lighting. The Initial State Thus Represents An Operationally Expensive Operation With No Possibility Of Further Development. The Power Supply Of The Light Points Is Carried Out Mainly By Cable Lines. When Replacing Light Fixtures, The Power Supply Of The Individual Light Fixtures In Their Terminal Boxes Will First Be Disconnected From The Vo Distribution. After That, The Existing Lights Will Be Dismantled From The Booms. The New Led Light Will Be Powered From The New Cyky-J 3X1.5Mm2 Supply Cable. Depending On The Condition Of The Existing Boom, The New Fixture Will Be Installed On Either The New Or Existing Boom. Subsequently, The Power Cable Will Be Connected To The Vo Distribution In The Terminal Box. Depending On The Technical Condition (Age, Functionality, Wear), This Terminal Block Can Be Replaced With A New One. Lamps Will Be Replaced On A Concrete Or Steel Mast. As Part Of The Project, Vo Switchboards Will Be Equipped With Switching Elements That Will Prevent The Unwanted Tripping Of Overcurrent Protections Due To The Impact Of Inrush Currents Of Led Lighting Power Sources.

Contact Information