|
5 Pm Polypropylene Fiber Cartridge. A 5 Micron (Μm) Polypropylene Fiber Cartridge Is A Standard Replacement Module For Rough (Mechanical) Water Purification. It Traps Sand, Rust, Silt And Scale. (For Retrofitting), Mechanical Cleaning Cartridge Pp-20Sl. Mechanical Cleaning Cartridge Pp-20Sl - Designed For Mechanical Filtration Of Water From Sand, Silt, Clay, Rust, Etc. Dimensions: Length 508 +/- 2 Mm, Diameter 62 +/- 2 Mm. Filtration Degree: 10 Microns. Filtration Rate: No Less Than 9 L/Min. Operating Water Temperature: From +3°C To +35°C. Resource: 24,000 Liters (But No More Than 6 Months From The Date Of Installation Of The Cartridge) (For Retrofitting), 1 Pm Polypropylene Fiber Cartridge. A 5 Micron (Μm) Polypropylene Fiber Cartridge Is A Standard Replacement Module For Rough (Mechanical) Water Purification. It Traps Sand, Rust, Silt And Scale. (For Retrofitting), Mechanical Cleaning Cartridge Pp-20Sl. Mechanical Cleaning Cartridge Pp-20Sl - Designed For Mechanical Filtration Of Water From Sand, Silt, Clay, Rust, Etc. Dimensions: Length 508 +/- 2 Mm, Diameter 62 +/- 2 Mm. Filtration Degree: 20 Microns. Filtration Rate: No Less Than 9 L/Min. Operating Water Temperature: From +3°C To +35°C. Resource: 24,000 Liters (But No More Than 6 Months From The Date Of Installation Of The Cartridge) (For Retrofitting), Sediment Cartridge Pp25-10Sl. Pp 25 - 10Sl - A Cartridge Made Of Foamed Polypropylene, Designed For Mechanical Purification Of Water From Rust, Dirt, Sand And Other Insoluble Impurities Larger Than 25 Microns. It Cannot Be Restored; After The End Of Its Service Life It Is Replaced With A New One. The Temperature Of The Purified Water Is 4-40°C. Resource Up To 50 M3 (Depending On Water Quality). Standard Sizes (Height/Diameter), Sl10” (Ø 63 Mm) (For Retrofitting), The Polypropylene Coupling D=20 Mm Is Made Of High-Quality Material. The Product Is Durable, Resistant To Corrosion, And Has A Long Service Life. Withstands Temperature Increases Up To +95 C, Maximum Operating Pressure - 25 Bar. Designed For Connecting Two Sections Of Polypropylene Pipes. Installation Is Carried Out Using The Socket Welding Method., Dye. High-Quality Enamel Pf-115 Based On Alkyd Varnish Is Intended For Painting Wooden And Primed Metal Surfaces Exposed To Weather Conditions, As Well As For Interior Finishing Work (Painting Doors, Windows, Window Sills, Various Wooden And Metal Surfaces). Easy To Apply, Forming A Uniform, Smooth Coating That Is Resistant To Water And Detergent Solutions. 5 Liter Bottles, Black, Counter. Designed To Measure The Volume Of Cold Or Hot Water In Domestic Water Supply Systems. The Version With A Pulse Output Allows You To Connect The Device To Automated Accounting Systems. Type And Principle Of Operation, Mechanical Single-Jet, Impeller (Rotation Of The Impeller Is Proportional To The Flow Rate), With A Dry Counting Mechanism. With Pulse Output (Generates Pulses When A Certain Volume Of Water Passes Through). Main Parameters Dn (Nominal Diameter): 15 Mm, Connection: Threaded, ½″. Installation Length: 110 Mm, Nominal Flow (Qn): 1.5 M³/H, Maximum Flow (Qmax): About 3 M³/H, Minimum Flow (Qmin): About 0.03–0.06 M³/H, Sensitivity Threshold: About 0.015 M³/H, Operating Pressure: Up To 1.6 Mpa. Water Temperature: Cold - From 5 °C, Hot - Up To 90 °C, Pulse Output. Type: Reed Switch Or Similar Transmission Ratio: Usually 1 Pulse = 0.01 M³ (Value Depends On Version), Application: Connection To Controllers, Remote Monitoring And Dispatch Systems, Design And Material, Housing - Brass, Mechanism - Impeller With Magnetic Transmission, Counting Module - Dry Type (Separated From Water). Possible Anti-Magnetic Protection, Availability Of Places For Sealing, Installation. Horizontal Or Vertical Orientation, Using A Coupling Connection. It Is Advisable To Provide A Filter And A Straight Section Of Pipe In Front Of The Device For Stable Readings
|
