|
Bids Are invited for Active Passive Trainer - Training Cycle Should Have Adjustable Crank Arm Height To Improve Vascular, Blood Circulation, Strength Training, Endurance And Muscle Tone. , The Unit Should Have Three Modes Of Operation:- I) Activeii) Passive And Iii) Motor Assisted , Should Be Able To Provide Training Facility For Legs And Arms With Biofeedback Analysis. , The Unit Should Have Facility Of Training Analysis And Performance Analysis With Muscle Tone. , The Unit Should Display Current Date And Time, Performance, Energy, No Of Spasm And Watts. , The Unit Should Have The Automatic Spasm Detection Feature. , The Unit Should Have Provision To Switch On Or Off The Spasm Detection. , The Unit Should Be Able To Provide The Passive Mode During The Exercise For Both Legs And Arms. , The Unit Should Have Safety Foot Shells For Feet And Leg Guides With Calf Shells To Secure Support For The Legs. , The Unit Should Have Rotatory And Tilting Operating Panel And Telescopic Front Stand. , The Unit Should Have Electronic Leg Insertion Feature To Help To Insert And Remove The Legs Of The User. , The Unit Should Have 10 To 12 Inch Lcd Touch Screen Display. , The Unit Should Have Velocity Range: 1-60 Rpm. , The System Should Have Therapy Time From 0 To 120 Minutes. , The Unit Should Have Facility To Save The Training Data. , The Unit Should Have The Facility To Upgrade The Software Via Usb. , The Unit Should Have Facility To Show The Actual Power Of The Limbs Used In Bar Diagram And Analysis In Percentage. , The Unit Should Have Minimum 10 Therapy Programs With Edit Function. , The Unit Should Have Got Levels Of Resistance Control In The Range Of 1-20 Levels. , The Unit Should Have The Feature Of Making The Same Compatible With Functional Electrical Stimulator. , Power Supply 220-240V/50 Hz. , Should Perform Preventive Maintenance (2Nos) During Warranty,Amc,Cmc & If Entered Into Amc(Includes Unlimited Breakdown Calls) /Cmc (Which Will Include Spare Replacement, Breakdown Calls). Vendor To Submit Sops For Pms At The Time Of Installation/ Commissioning. This Is Mandatory Requirement. , Performance Certificates Of Iq,Oq,Pq Tests To Be Submitted At The Time Of Installation/Commissioning. , Vendor To Submit The Technical Data Sheet, Brochure Etc As A Tender Document With Reference To The Quoted Make & Model. Please Mention The Reference Page No., Quoted Model Name/Number Against Each Item Etc In These Documents Against Each Technical Specifications In The Compliance. , Vendor To Submit List Of Consumables/Consumable Spares And Spare Parts( I.E.Spares Need To Be Replaced At Regular Intervals, Maybe Quarterly/Half Yearly/Yearly Etc.) If Any.Cost Of Consumables To Be Added In The Financial Bid Not In The Technical Bid. , Please Submit Pre Installation Requirements [Electrical, Hvac, Compressed Air Along With Air Pressure Mentioned), Water Requirement (Ro/Di/Distilled Water With Its Pressure, Flow Rate Per Hour) ; If Any Of The Above Is Essential] , Vendor To Provide Ups With Adequate Capacity, If Required For The Quoted Equipment. If Not Required, Vendor To Mention The Same. , Vendor To Submit Details Of Footprint Size & Weight Of The Quoted Model. , Vendor To Submit Power Consumption. , Demo Of The Quoted Model , Will Be Required If So Desired By The User, After The Opening Of The Technical Bid And Prior To Opening Of Financial Bid. This Is For Technical Evaluation. All Technical Specifications Mentioned Above To Be Mandatorily Shown In The Demo Unit. , Users/Installation List: A List Of Installations Of The Quoted Model With The Address And Contact Numbers To Be Provided. , Predispatch Inspection At Factory Will Be Required If Desired By Authorities. , Should Be Ce/Us Fda/Bis/Icmed Approved. , Vendor Should Provide The User Manual And Service Manual Copy During The Installation Of The Equipment. , Unpacking And Shifting The Consignment To The Installation Site Is To Be Included In The Vendors Scope Of Supply. Bidder/Manufacturer/Authorized Service Provider Should Take Responsibility To Lift /Shift The Consignment From Unloading Site To The Installation Site. Unloading Site Shall Be Stores Department, Indian Cancer Society,Parel.If Needed ,Bidder Has To Arrange For The Labours At No Charge To Indian Cancer Society,Parel. (Before Submitting The Quotation,Bidders May Visit Indian Cancer Society,Parel. To Know Unloading And Installation Site. , Training: , Operational Training To Be Provided Onsite To All Departmental Staff And Primary Level Maintenance Training To Be Provided To Inhouse Biomedical Engineers. , Local Service Support: Should Have Local Office And Service Support/Service Engineer For Attending The Breakdown Calls. Details To Be Submitted. , Response Time: Should Not Be More Than 06 Hrs From Lodging A Breakdown Complaint On Toll Free Or By Email. , Warranty- 2 Years , Cmc- Cost Per Annum Will Be Considered For All Bidders For 8 Years After Warranty , Warranty And Cmc Should Include A) 2/4 Preventive Maintenance/ Year And Unlimited Breakdown Calls Along With Spares.B) All Bought Out Items Quoted Along With The Main System (Local/Non-Local) And Ups Should Be Covered. C) Yearly Calibration/Validation/Qa, Testing And Measuring Equipment Used Should Be Traceable To Si Units Through National/ International Standards (As Per Nabl/Nabh Norms). D) Pm Kit If Any. E) All Upgrades/Update, No Seperate Licence Fees Will Be Payable. , Back To Back Assurance To Be Taken By The Supplier From Oem To Supply Spares For Minimum 10 Years And To Be Submitted. , If 2 Years Warranty, Cmc Per Annum For 8 Years After Warranty Wherever Applicable Are Not Adhered To, Tmc Reserves Right To Reject The Offer. , Please Mention Whether Ups Is Required For The Equipment. If So Should Be Included In The Offer. , Only Yes Or No Should Be Mentioned In Compliance Report And Additional Information In Remarks Column. , Please Provide List Of The Consumables/Spares/Reagents/Control/Calibrators (If Any) In Technical Documents And Cost Of The Same Should Be Uploaded In Pdf File In The Financial Documents. , Do Not Mention / Upload Price And Cost In The Technical Documents Otherwise Your Quotation Will Be Disqualified At Technical Stage. Total Quantity : 1
|
