Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Indust ... in India

Work Detail

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Fabrication, Erection Dismaintelling Work; Buyer - Replace The Worn-Out Runners Of The Cane Carrier, Bagasse Carrier, And Bagasse Elevator. , Remove The Angles Fitted On Both Sides Of The Cane Carrier And Install New Angles , Remove, Straighten, And Refit The Bent Girders Of The Cane Carrier Pit And Conduct A Successful Trial. , Cut Out And Remove The Damaged Side Plate Of The Cane Carrier And Replace It With A New/Reconditioned Plate. , Repair The Mill House Gutter. , Repair The Damaged Bottom And Side Plates Of The Juice/Water Weighing Tank And Conduct A Trial. , Cut Out And Replace The Damaged Trough Plates Of The Bagasse Elevator/Bagasse Carrier. , Replace The Damaged Side Plates And Trough Plates Of The Bagasse Elevator/Bagasse Carrier And Conduct A Trial. , Remove The Catcher Of The Quad, Repair/Replace The Damaged Fins, Fit And Strengthen Them, And Conduct A Satisfactory Trial. , Install New Tubes In The Quad And Juice Heater And Carry Out Hydraulic Testing. , Conduct Hydraulic Testing Of The Tubes Of The Quad, Juice Heater, And Pans And Give A Satisfactory Trial , Remove The Quad Seal Box And Related Vapor Pipe Cover, Fabricate A New Seal Box From 10/12 Mm Plate, Refit All Parts, And Conduct A Successful Trial , Fabricate And Install A New Catcher For The Quad And Conduct A Trial. , Remove The Rods Of The Quad Blind Tubes And Ream The Holes. , Replace The Damaged Compartment Plate Of The Juice Heater And Conduct A Trial. , Open, Face, And Refit The Juice Heater Cover. , Replace The Damaged Partition Plate Of The Juice Heater With A New 8/10 Mm Plate, Prepare Packing Grooves, Fit Packing, And Conduct A Trial. , Open The Damaged Junction Box Of The Juice Heater, Replace The Double-Beat Valves With New Ones, And Conduct A Satisfactory Trial. , Patch Repair The Damaged Partition Plate Of The Juice Heater. , Remove The Old Juice Heater And Install Another/New Juice Heater At The Specified Location With All Connections And Conduct A Satisfactory Trial. , Cut Out About One Meter Of The Recovery Tower Flange Side Of The Syrup Sulphiter And Replace It With A New Section, Fit It, And Conduct A Trial. , Replace The Damaged Pipe Flange Of The Ms/Ss Coil Of The Juice Sulphiter , Remove And Replace The Jacket Of The Sulphur Furnace Using A New/Reconditioned Plate , Remove And Replace The Damaged Top Cover Of The Sulphur Furnace And Conduct A Trial. , Remove And Replace The Damaged Bottom Tray Of The Sulphur Furnace And Conduct A Trial , Remove And Replace The Damaged Tray Of The Vacuum Filter. , Remove The Damaged Plate Near The Juice Box From The Upper Cell Door And Replace It With A New 8/10 Mm Plate; Conduct A Satisfactory Trial. , Repair The Damaged Disc/Tray Fitted On The Center Shaft In The Mud Compartment Of The Door. , Repair The Trays Of The Compartment Wherever Leakage/Cuts Have Occurred. , Check The Plate Compartments, Replace Damaged Plates, Provide Angle Support, Label Them, And Conduct A Leak-Proof Trial. , Replace The Door Gutter. , Cut Out And Replace The Damaged Shell Of The Pan Using 8/10 Mm Plates And Conduct A Satisfactory Trial. , Remove The Damaged Feed Header Of The Pans, Fabricate And Install A New Header With Flange, Complete All Related Work, And Conduct A Trial. , Replace The Damaged Bottom/Side Plates Of The Hot-Cold Water Overhead Tank And Conduct A Leak-Proof Trial. , Remove The Pan Top Cover Seal And Replace The Taper Cone Beneath It Using 10 Mm Plate. , Remove And Replace The Pan Top Cover And Conduct A Trial. , Fabricate And Install The Syrup Tank Gutter Of The Pan And Conduct A Satisfactory Trial. , Remove And Replace The Pan Dome With A New Plate And Conduct A Satisfactory Trial. , Remove The Broken Shaft Of The Crystallizer And Install A New Shaft. , Replace The Worn Ribs Fitted On The Arms Of The Crystallizer And Strengthen Them , Remove Damaged Crystallizer Arms And Fabricate/Install New Ones. , Fabricate And Install The Molasses Chamber Of The Centrifugal Machine And Conduct A Successful Trial. , Fabricate And Install The Chute Of The Continuous Centrifugal Machine And Conduct A Successful Trial. , Remove The Old Magma Shaft, Fabricate A New One, Install It, And Conduct A Trial. , Dismantle The Transit Heater Fitted On Centrifugal Machine No. 1, Replace All Damaged Partition Plates, Nipples, And Other Parts, Reassemble, And Conduct A Trial. , Open, Repair, And Refit The Old Strainer Mesh Of The Pump Suction Pipe. , Remove, Fabricate, Inspect, And Reinstall The Jet Boxes Fitted In The Condensers. , Open The Junction Box In The Spray Pond, Clean The Nozzles And Pipelines, Clean Branch Line Debris, And Refit All Parts. , Fabricate And Fit The Cluster Using Ms Pipe In The Spray Pond. , Carry Out Patch Repairs On Damaged And Weak Plates At Various Stations. , Fabricate And Install Circular/Square Tanks At Any Location In The Mill As Directed, Provide Connections, And Conduct A Trial. , Remove Old Beds Of Pumps And Motors Of Various Sizes At Different Stations And Fabricate/Install New Beds. , Repair The Bagasse Flow Cyclone Fitted On The Vacuum Filter, Fabricate And Install A New Chimney, And Conduct A Satisfactory Trial. , Remove The Cone Fitted On Top Of The Juice Sulphiter And Fabricate/Install A New One From 8/10 Mm Plate As Per S Le. , Replace The Shell Of The Clarifier Compartment And Conduct A Trial. , Remove And Replace The Vapor Pipe And Intermediate Vapor Pipe Of Quad Body No. 04 Using 8/10 Mm Plate And Conduct A Trial. , Remove The Vapor Bleeding Pipe From Quad Body No. 01 To The Juice Heater Header And Fabricate/Install A New One Using 8/10 Mm Plate; Conduct A Trial. , Dismantling, Fabrication, And Erection Of Heavy Structures. , Strengthening Of Heavy Structures. , Carrying Out Patching Work At Various Stations. , Remove Ss/Brass Tubes Of Pans, Juice Heaters, Or Quads And Carry Out Retubing With New Tubes Followed By Satisfactory Hydraulic Testing. , Fabricate Motor Beds For Motors Ranging From 10 Hp To 20 Hp. , Fabricate And Connect The Magma Pump Motor Bed. , Fabricate Economizer Tubes As Per The S Le Tube Provided And Conduct Hydraulic Testing And Trial. , Remove The Ducting Of The Air Heater/Economizer And Fabricate New Ducting Using New Plates. , Dismantle Equipment From The Existing Centrifugal Installation To Create Space For A Centrifugal Machine Received From Majhola Sugar Mill; Fabricate Columns, Beams, Base, And Platform; Install The Complete Machine, Motor, Panel, Staging, And Accessories; And Conduct A Satisfactory Trial. , Fabricate And Install The Hopper Base Channel, Level It, Assemble The Drive, Fabricate The Motor Bed, And Carry Out Alignment. , Fabricate The Hopper Trough, Fit Distance Pieces And Connecting Rods, And Conduct A Satisfactory Trial. , Fabricate The Pug Mill Column Structure And Platform, Install The Pug Mill, Prepare Motor And Reduction Gear Beds, Align Them, And Conduct A Satisfactory Trial. , Remove The Tubes Of The Air Heater, Fabricate/Install Replacements Using Old Tubes Where Applicable, And Conduct A Satisfactory Trial. , Cutting Serration Grooves In The Teeth Of The Mill Rollers As Per The Specifications/Instructions. , Dismantling Of Pipe Lines From 300 Mm To 1100 Mm Dia. (Pan, Vapor Pipe, Injection And Spray Header). , Fabrication Of Pipe Lines From 300 Mm To 1100 Mm Dia. (Pan, Vapor Pipe, Injection And Spray Header). , Erection/Installation Of Pipe Lines From 300 Mm To 1100 Mm Dia. (Pan, Vapor Pipe, Injection And Spray Header). , Dismantling Of Damaged 2-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 3-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 4-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 5-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 6-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 8-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 10-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling Of Damaged 12-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 2-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 3-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 4-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 5-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 6-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 8-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 10-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Erection/Installation And Trial Of New/Old 12-Inch Pipeline (Pipe Sizes Ranging From ½ Inch To 12 Inch). , Dismantling And Re-Installation Of Damaged 2-Inch Bend At Various Stations (Including Tees, Crosses, Bends, Reducers, Nipples, Flanges And Valves Ranging From 25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 3-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 4-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 5-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 6-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 8-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 10-Inch Bend At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 2-Inch Flange At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 3-Inch Flange At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged 4-Inch Flange At Various Stations (25 Mm To 300 Mm Dia.). , Dismantling And Re-Installation Of Damaged/Corroded Flanges (5-Inch Size) At Various Stations, Including Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Diameter. , At Various Stations, Dismantling And Installing Corroded/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Flange. , At Various Stations, Dismantling And Installing Corroded/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 8-Inch Flange , At Various Stations, Dismantling And Installing Corroded/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 1-Inch Flange , At Various Stations, Dismantling And Installing Corroded/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 12-Inch Flange , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 4-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 5-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 8-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 10-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 12-Inch Reducer. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 2-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 4-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 5-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 8-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 10-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 12-Inch Valve. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 2-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 4-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 5-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 10-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 12-Inch Nipple. , At Various Stations, Dismantling And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 2-Inch Nipple. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 2-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 4-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 5-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 8-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 10-Inch Bend , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 3-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 4-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 5-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 6-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 8-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 10-Inch Flange. , At Various Stations, Fabricating And Installing Worn-Out/Damaged Tees, Crosses, Bends, Reducers, Nipples, Flanges, And Valves Ranging From 25 Mm To 300 Mm Size, Including 12-Inch Flange. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 3-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 4-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 5-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 6-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 8-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 10-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 12-Inch Reducer. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 2-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 3-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 4-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 5-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 6-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 8-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 10-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 12-Inch Valve. , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 2-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 3-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 4-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 5-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 6-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 8-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 10-Inch Nipple , Fabrication And Installation Of Damaged/Worn-Out Tee, Cross, Bend, Reducer, Nipple, Flange, And Valve Of Sizes Ranging From 25 Mm To 300 Mm At Various Stations, Including A 12-Inch Nipple , Fabrication And Installation Of Flanges Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 14-Inch Flange , Fabrication And Installation Of Flanges Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 16-Inch Flange , Fabrication And Installation Of Flanges Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 20-Inch Flange , Fabrication And Installation Of Flanges Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 44-Inch Flange , Fabrication And Erection (Installation) Of Reducers Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 14-Inch Reducer. , Fabrication And Erection (Installation) Of Reducers Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 16-Inch Reducer. , Fabrication And Erection (Installation) Of Reducers Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 18-Inch Reducer. , Fabrication And Erection (Installation) Of Reducers Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 20-Inch Reducer. , Fabrication And Erection (Installation) Of Reducers Of Sizes Above 300 Mm And Up To 1100 Mm, Including A 36-Inch Reducer. , Fabrication And Erection (Installation) Of Bends And Tees Of Sizes Above 300 Mm And Up To 1100 Mm, Including 14-Inch Bends – 2 Nos. , Fabrication And Erection (Installation) Of Bends And Tees Of Sizes Above 300 Mm And Up To 1100 Mm, Including 20-Inch Bends – 5 Nos. , Fabrication And Erection (Installation) Of Bends And Tees Of Sizes Above 300 Mm And Up To 1100 Mm, Including 36-Inch Bends – 8 Nos. , Fabrication And Erection (Installation) Of Bends And Tees Of Sizes Above 300 Mm And Up To 1100 Mm, Including 14-Inch Nipil – 2 Nos.

Contact Information