|
The M10 Nut Is Intended For Creating Detachable Threaded Connections In Construction, Mechanical Engineering And Installation Work., Metal Drills Designed For Drilling Holes In Ferrous And Non-Ferrous Metals, Steel And Other Metal Structures. Diameter Range: M10–M12 (10 Mm And 12 Mm)., The M10 Washer Is Intended For Use In Threaded Connections Together With Bolts, Screws And Nuts With M10 Threads In Construction, Installation And Repair Work., The Threaded Rod Is Intended For Fastening And Installation Work In Construction, Mechanical Engineering And Metal Structures. Size: M10 × 1000 Mm., Hot Rolled Equal Flange Steel Angle Made Of Carbon Steel Gost 8509-93 50X50x5 With Delivery, Provide A Quality Certificate, Deep Vibrator For Compacting Concrete Mixtures, Intended For Construction And Monolithic Works. Flexible Shaft (Club) Length: At Least 5 Meters., The Manual Laser Cleaning Device Is Used To Remove From The Surface Of Metals: Rust; Oxides Of Non-Ferrous Metals; Oils; Pollution; Old Paintwork., A Freezer (Freezer) Designed For Long-Term Storage Of Frozen Food Products In Domestic And Commercial Conditions. Useful Volume: At Least 100 Liters., Universal Self-Tapping Screws Designed For Fastening Wooden, Plasterboard And Metal Structures. Length: 50 Mm., The Jackhammer (Electric) Is Intended For Dismantling Work On The Destruction Of Concrete, Brickwork, Asphalt And Other Building Materials., The Diesel Generator Is Intended For Backup And Main Power Supply Of Facilities. Fuel Type - Diesel. Rated Power - At Least 22 Kw. Number Of Phases – 3. Output Voltage – 380/230 V. Current Frequency – 50 Hz. Engine Speed – 1500 Rpm. Engine Type: Four-Stroke Liquid-Cooled Diesel Engine. Number Of Cylinders – At Least 4. Starting System – Electric Starter. The Generator Must Be Equipped With An Automatic Voltage Regulator (Avr). The Degree Of Protection Of The Alternator Is Not Lower Than Ip23. Insulation Class - Not Lower Than H. Fuel Tank Capacity - Not Less Than 45 Liters. Fuel Consumption At 100% Load – No More Than 5 L/Hour. The Control Panel Must Provide Monitoring Of Voltage, Frequency, Current, Engine Hours, Oil Pressure And Coolant Temperature. Availability Of Protection Against Overload, Short Circuit, Low Oil Pressure And High Engine Temperature. Contents: Battery, Muffler, Set Of Operating Fluids, Instruction Manual. Size - 1750X850x1050mm, Weight 764Kg. The Product Must Be New, Previously Unused, Manufactured No Earlier Than 2026. The Warranty Period Is At Least 12 Months., Hydraulic Hammer For Hitachi Zaxis 240-3 Crawler Excavator, The M12 Nut Is Intended For Creating Detachable Threaded Connections In Construction, Mechanical Engineering And Installation Work., Household Wall-Mounted Air Conditioner (Split System), Designed For Cooling And Heating Residential And Office Premises. Cooling Capacity: At Least 2.6 Kw (9000 Btu Class)., Steel Angle 75X75x6 Hot-Rolled Equal Flange Made Of Carbon Steel Gost 8509-93 Flange Width 75X75x6, Length More Than 10 Meters With Delivery, Provide A Quality Certificate, Household Wall-Mounted Air Conditioner (Split System), Designed For Cooling And Heating Rooms. Cooling Capacity: No Less Than 2.0 Kw (7 Btu Class)., It Is Required To Supply And Install Frame-Type Scaffolding With A Height Of 10 (Ten) Meters And A Total Length Of 50 (Fifty) Meters, Tier Width - 1 M, Area: At Least 500 M², Equipped With A Ladder (Flight Of Stairs) For The Safe Ascent And Descent Of Workers. The Product Must Comply With The Requirements Of The Following Regulatory Documents: Gost 27321-2018 “Rack-Mounted Attached Scaffolding For Construction And Installation Work. Technical Specifications Gost 24258-88 Means Of Scaffolding. General Technical Conditions St Rk En 12810-1 Facade Scaffolding. Pipe Thickness: No Less Than 42 Mm, Pipe Wall Thickness: No Less Than 1.5 Mm. Maximum Load 250 Kg. Height Step: 2.0 M. Frame Material: Steel Pipe With Anti-Corrosion Coating. Flooring: Metal Or Wood With An Anti-Slip Surface. Fastening To The Building: Anchor, In Accordance With Safety Requirements. Complete Set: Frames, Diagonal And Horizontal Braces, Decking, Fences, Stair Sections, Support Shoes (Jacks), Fasteners. Coating Of Metal Structures: Primer-Enamel Or Powder Coating. Compliance With Labor Protection And Safety Requirements When Performing Construction Work., A Household Refrigerator Designed For Storing Food In Home And Office Environments. Total Useful Volume: At Least 200 Liters., Reinforcing Steel 20 Mm Periodic Profile Class A-Iii (A400) St Rk 2591-2014 With A Diameter Of 20 Mm, Length More Than 10 Meters With Delivery, Provide A Quality Certificate, A Vibrating Rammer (Tamping Machine) Is Designed For Compacting Loose And Cohesive Soils During Construction And Road Work In Hard-To-Reach Places, Trenches And Confined Spaces.
|
