|
The Subject Of The Order Includes The Implementation Of The Task Entitled: Improvement Of Energy Efficiency Of The Vocational And Continuing Education Center In Strzelce Opolskie. The Subject Of The Project Is, Among Others: The Following Construction Works In The Teaching Building And The School Workshop Building: A) Replacement Of Window Joinery: - Current State - Windows Made Of Pvc Profiles And Wooden Double-Glazed Windows. - Designed State - Construction Of Windows Made Of Pvc Profiles, Triple-Glazed, Maximum Heat Transfer Coefficient Of Windows 0.9 W/M2k, Maximum Rw Coefficient For Windows 36 Db. In Order To Ensure Proper Air Exchange In The Rooms, Pressure Window Air Vents Or Hygro-Controlled. From The Outside, In The Insulation Layer, Elements Protecting Against Excessive Sunlight Should Be Installed - Electrically Controlled Aluminum Blinds With Tilt Adjustment And Wind Sensors To Prevent Their Damage. The Colors Of The Joinery And Blinds Are Light, Gray, Similarly To The Bcu Segment (Color On Both Sides). In Addition, It Is Necessary To: - Replace The Internal Terrazzo Window Sills With Window Sills Made Of Conglomerate, - Fill In The Plasters Around The Windows And Sills, - Prepare The Wall Surfaces, Leveling Them To The Existing Wall Plane, - Paint The External Walls. Note: The Windows In The Gymnasium Are Glazed With Safety Glass. B) Replacement Of External Doors: - Current Condition - Doors Of Various Types, Aluminum And Pvc, - Designed Condition - External Doors Should Be Made Of Glazed, Made Of Gray Aluminum Profiles, Maximum Penetration Coefficient Heat Of External Doors - 1.3 W/M2k, Maximum Rw Coefficient Of External Doors 36 Db, Door Glazing - Vsg Safe Glass. - Replenish Plasters Around The Door. In Addition, You Should: - Prepare The Wall Surface With Alignment To The Existing Wall Plane, - Paint The External Walls. - Repair Any Damage To The Floor And Surface At The Exits. Joinery Colors: Light, Gray, Analogous To The Bcu Segment (On Both Sides). Color). C) Insulation Of Flat Roofs: - Current Condition - Ventilated Concrete Flat Roof Over The Teaching Area (Ceiling Made Of Reinforced Concrete Slabs, Mineral Wool Insulation In Slabs And Granulated, Ventilated Void, Corrugated Boards, Roofing Felt, Flat Roof Over The Workshop Part, Non-Ventilated Flat Roof On Corrugated Slabs, Insulated With Styrofoam Approx. 15 Cm Thick, Designed Condition - Dismantling Of The Installation Lightning Protection, Dismantling Of Gutters And Downpipes, Dismantling Of Sheet Metal Workings On Fire Walls And Roof Eaves, Dismantling Of Chimney Caps, Overlaying, Plastering And Painting Chimneys, Making Concrete Chimney Caps, Overlaying, Plastering And Painting Of Fire Walls, Dismantling Roofing Felt Made Of Roofing Felt And Styrofoam Insulation In The Part Near The Eaves, Making Substructures For Eaves, Laying Vapor Barriers, Construction Of Thermal Insulation From Hard Mineral Wool Boards With A Total Thickness Of 25 Cm, Installation Of Sheet Metal Fl
|
