Tenders Are Invited For Delivery Of A Used Shredder in Poland

Work Detail

The Subject Of The Order Is The Delivery Of A Used Doppstadt Dw 3060 Biopower1 Shredder. Year Of Production Not Older Than 2011 2. Maximum Number Of Hours Worked. Not More Than 5000 Hours 3. The Device Cannot Be A Prototype, It Must Come From Series Production, 4. The Device Is Built On A Wheeled Chassis With At Least Three Axles, 5. Adapted To Be Connected To A Tractor Using A 50 Mm Pass-Through Hitch, 6. Equipped With A Braking System With Abs And Road Lighting, 7. Equipped With A Ball Hitch At The End Of The Drawbar, In Order To Pull The Machine Around The Square Using E.G. A Loader. 8. Total Weight Of The Device Ready For Operation (Gvw): Max. 25 Mg. 9. The Device Is Equipped With A Diesel Engine With A Power Of Min. 360 Kw 10. Fuel Tank: Min. 500 Liters11. Shredding Chamber: A) Equipped With One Shredding Shaft And At Least One Shredding Comb, B) Loading Height: Max. 3000 Mm, C) Loading Width: Min. 3900 Mm, D) Material Grinding Method: Shaft - Comb, E) Shaft And Comb Located Along The Machine Axis, F) Grinding Shaft: Length: Min. 3,000 Mm, Diameter: Min. 600 Mm G) Machine Control Equipped With A Shaft Reverser, H) Equipped With New, Replaceable Grinding Knives, I) Number Of Knives On The Shaft: Min. 42 Pieces J) Knives Installed In The Machine Designed For Shredding Large-Sized Waste 12. Shredding Comb: A) Length: Min. 3000 Mm B) Lowered And Raised Hydraulically C) Number Of Comb Elements: Min. 42 Pieces D) Comb Elements With The Possibility Of Their Regeneration, 13. Power Transmission To The Shaft Using A Gear Transmission With Overload Protection 14. Set Of Indicators Containing At Least: A) Fuel Level, B) Number Of Hours Worked Since The Beginning Of Operation, C) Number Of Hours Worked Per Day, D) Rotational Speed Of The Engine Crankshaft, 15. The Machine Is Equipped With Ejection Conveyors Of The Fraction After Grinding: Lower And Rear, A) Lower Conveyor Located Under The Grinding Shaft B) Belt Length: Min. 3000 Mm, C) Belt Width: Min. 1000 Mm, D) Feeder Speed Steplessly Adjustable, 16. Rear Conveyor: A) Belt Length: Min. 4500 Mm, B) Belt Width: Min. 1100 Mm C) Feeder Speed Steplessly Adjustable, D) Rear Conveyor Folded And Unfolded Hydraulically, 17. The Machine With The Rear Conveyor Is To Be A System Independent Of External Power Sources. 18. The Drive Unit Is Installed In A Way That Allows Easy Access To Service Points. 19. The Machine Is Equipped With: A) Remote Control B) Hydraulic Self-Drive20. Required Documents And Certificates To Be Provided With The Device: A) Ce Certificate Of Conformity, B) Dtr Device Operating Manual,

Contact Information