Tenders Are Invited For Construction Of A Garage For The Volunteer Fire Department In Brzostowa Góra in Poland

Work Detail

The Subject Of The Order Is The Implementation Of An Investment Task Entitled: Construction Of A Garage For The Volunteer Fire Department In Brzostowa Góra. A) Existing Condition And Implementation Conditions (Works Completed) The Subject Building Of The Volunteer Fire Department Station Was Built To A Shell State Using Traditional Brick Technology Made Of Ceramic Hollow Bricks (29 Cm). The State Of Progress Of The Works Is Confirmed By Photographic Documentation (Files: Img_20260601_105028.Jpg, Img_20260601_105031.Jpg, Img_20260601_105034.Jpg) - Annex No. 14 - Photographic Documentation The Scope Of This Procedure Does Not Include Works That Have Already Been Completed, I.E.:- Supporting Structure Of The Facility (Concrete Footings And Foundations, Load-Bearing Walls, Columns, Reinforced Concrete Pins And Ceiling). - Roof Structure (Wooden With A 35-Degree Slope) With Complete Roofing Made Of Metal Roofing Tiles/Flat Sheet Metal In Red. - External Joinery: Installed Pvc Windows, Sectional Garage Door In Brown And External Entrance Doors. This Order Covers The Completion Of The Investment In The Scope Of Finishing, Facade And Installation Works And Full Equipment Of The Facility In Accordance With The Attached Bill Of Quantities.2. Material Scope Of The Orderthe Investment Is Located On Registered Plots No.: 591, 1507, 587/2 (And Neighboring Plots Covered By The Project) In Brzostowa Góra. Facility Parameters: - Construction And Initial Condition: Building Constructed Using Traditional Brick Technology, Founded On Footings And Foundations, Brought To A Closed Shell State. - Ceiling: Densely Ribbed Ceiling Above Ground Floor (Teriva Type). - Roof: Wooden, Gable Structure With A 35-Degree Slope, Covered With Red Sheet Metal. - Room Layout: The Facility Includes A Garage Hall And Facilities (Including Social Rooms, Utility Rooms, Cleaning Rooms, Cloakrooms, Bathrooms And Toilets) In Accordance With The Design Documentation. As Part Of The Order, Finishing And Construction Works Should Be Performed In A Building Erected To A Closed Shell State, Along With Furniture And Equipment For Individual Rooms. The Scope Includes: 2.1 Construction And Finishing Works - Execution Of Moisture-Proof And Thermal Insulation Under The Floor And On The Ceiling, - Execution Of Subfloors For Floors (Cement And Concrete Screeds) Along With Supplementing The Ceiling Elements, - Execution Of Internal Cement-Lime Plasters On Walls And Ceilings, - Execution Of Floor And Wall Claddings With Ceramic Tiles And Roll-Up Plastic Carpets, - Preparation Of Substrates And Double Painting Of Walls And Ceilings With Emulsion Paints, Including The Installation Of Washable Paneling, - Installation Of Internal Joinery, Including Internal Doors, Technical Doors With Specified Fire Resistance, Attic Hatch With Ladder And Internal Window Sills, - Complete Insulation Of The External Walls Of The Building (Facade) In The Jointless System (Etics) Along With Plastering And Plinth Finishing, - Im

Contact Information