Tenders Are Invited For Renovation Of The Disabled Access Ramp And External Stairs To The Building At Ul. Pl ... in Poland

Work Detail

The Subject Of The Investment Is The Renovation Of The Disabled Access Ramp And External Stairs To The Building At Ul. Plac Wolności 2 In Sępólno Krajeńskie. • Area Of The Stairs And Upper Terrace: 46.30 M2, • Area Of The Ramp For The Disabled: 50.54 M2, • Height Of The Upper Terrace From The Assumed Level Of +0.00: +1.93 M, • Designed Number Of Steps In The Flight Of Stairs: 10 Pcs. Scope Of Workslide Ramp For The Disabled • Demolition Of The Existing Concrete Surface And Stoneware Tiles; • Removal Of The Screed Layer Between The Tiles And The Reinforced Concrete Slab On The Upper Landing; • Removing The Soil Between The Driveway Walls; • Dismantling The Plaster Of External Retaining Walls; • Demolition Of The Facade Of The External Wall Of The Building Located Behind The Driveway To A Height Of 30 Cm Above The Designed Surface. Cleaning The Masonry And Making Vertical Insulation Using Asphalt-Rubber Mass. Reconstruction Of Thermal Insulation Using Waterproof Polystyrene. 15 Cm. Finish The Strip Above The Plinth Made Of Granite Tiles With Mineral Plaster On The Facade Mesh;• Determining The Condition Of The Driveway Supports - Longitudinal Walls On Which The Balustrades Are Mounted. If Their Condition Is Poor - Perform Repair Works (Replacement Of The Element With Reinforced Concrete Retaining Walls);• If A New Retaining Wall Is Constructed, The Edges Should Be Finished With 15 Mm Plaster;• Filling The Space Between The Retaining Walls With Sand. The Last Layer Should Be Made Of Mechanically Stabilized Aggregate. 30 Cm, Compacted In Layers To Obtain Is=0.98; • Flamed Granite Slab Thickness Should Be Used As The Finishing Layer Of The Ramp. 6 Cm On Cement-Sand Bedding, Anthracite And White; • Install Galvanized, Powder-Coated Steel Balustrades, 110 Cm High. The Posts Should Be Made Of Round Pipes With A Diameter Of 60 Mm. Make Handrails For Disabled People On Both Sides, Spaced 100-110 Cm At Heights Of 75 And 90 Cm;• Along The Driveway On The Outside, Make Curbs With A Height Of Min. 7 Cm, • Finish The Retaining Walls With Mineral Plaster. 2Mm. Agree On The Colors With The Ordering Party;• Removal And Disposal Of Materials Obtained From Demolition And Not Subject To Re-Installation. External Stairs And Upper Terrace• Demolition Of Stoneware Tiles On The Upper Terrace And External Stairs;• Demolition Of Cement Screed Made On A Reinforced Concrete Slab. Approx. 5 Cm;• Cleaning And Leveling The Ground;• Cutting Off A 20 Cm Fragment Of The Reinforced Concrete Slab With Visible Reinforcement. Formwork Of A New Fragment Of The Slab With Glued Ribbed Rods Ø12 Every 10 Cm For Chemical Anchors To The Edge Of The Slab. Concrete A Section Of The Slab - Adjust The Thickness Of The Element To The Existing Slab. Lay New Reinforcing Bars Upwards, Maintaining The Cover Of C = 25 Mm. Concrete C16/20;• Execution Of Cement Screed Thick. 5 Cm Reinforced With Ø4 Steel Mesh With A Mesh Of 15X15 Cm With A Slope Towards The Street; • Demolition Of The Facade (Styrofoam

Contact Information