|
A Steel Strip Is A Metal Blank That Is Used In A Wide Variety Of Areas Of Production And Construction. Width 50Mm, Thickness 5Mm. It Is Most Often Used In The Creation Of Metal Structures And Spare Parts For Various Equipment, As Well As As A Grounding Element In The Construction Of Lightning Rods. The Wide Distribution Of Such A Product Is Explained By The Fact That It Combines Excellent Performance Characteristics And A Fairly Affordable Price. Hot-Rolled Steel Strip In Accordance With The Requirements Of Gost-103-…. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., An Extension Cord On A Reel Makes It Easy To Connect Electrical Equipment Remote From A Stationary Outlet. Indispensable On Construction Sites, In Gardens, In Amusement Parks, In Industry And In Everyday Life. Spring-Loaded Covers Tightly Close The Socket From Penetration Of Moisture, Dirt, Dust, Providing Protection Degree Ip44. Thermal Relay Protects Against Exceeding The Maximum Permissible Connected Load. The Insulating Rubberized Handle Ensures Safe And Comfortable Operation. The Closed-Loop Steel Frame Increases Stability. Key Technical Parameters Are Marked On The Front Side Of The Case. Frequency, Hz: 50. Body Shape: Round. Number Of European Standard Sockets: 4. Electrical Protection Class. Current: 1. Protection Degree: 44. Operating Temperature: -25+40 °C. Rated Current, A: 16. Core Cross-Section, Mm2: 2.5. Cable Length, M: Not Less Than 40 M. Cable Type: Pvs. Product Material: Plastic. Voltage, V: 230. Power, W: 3500. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, Pre-Agreed The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Cellular Polycarbonate Is A Modern Building Material That Is Used To Create Roofing Coverings. It Consists Of Panels Of Several Thin Sheets Connected By Longitudinal Stiffeners, Which Ensures Its Strength And Light Transmittance. Type: Cellular (Cellular) Polycarbonate. Purpose: Installation Of Roofs For Gazebos, Canopies, Bus Stops And Other Small Architectural Forms. Sheet Thickness: 8 Mm. Color: Brown. Density: No Less Than 1.5 Kg/M². The Presence Of A Protective Uv Layer Against Ultraviolet Radiation. Light Transmission: No Less Than 75%. Sheet Width: 2100 Mm. Sheet Length: Not Less Than 6000 Mm. The Material Is Resistant To Precipitation, Ultraviolet Radiation And Temperature Changes. Operating Temperature: From -40°С To +120°С. The Surface Is Free Of Cracks, Chips, Delaminations And Other Defects. Delivery In Factory Protective Film. The Product Is New, Not Used. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Hacksaw Consists Of A Metal Blade With Teeth And A Rubberized Handle For Ease Of Use. Used For High-Quality And Fast Wood Processing. The Length Of The Canvas Is 400 Mm. Tool Steel. High Strength And Wear Resistance. The Rubberized Handle Provides A Secure Grip And Comfort During Use. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Anchor Bolt With Nut 8X120 Technical Specification: 1. Design: Expansion Type Anchor, Consisting Of A Steel Pin With A Conical Shank, A Movable Cylindrical Spacer Sleeve (Jacket) With Longitudinal Slots, A Flat Washer And A Hex Nut. 2. Nominal Diameter (Thread/Sleeve Diameter): 8Mm. 3. Nominal Anchor Length: 120Mm. 4. Minimum Drilling (Anchoring) Depth: At Least 40-50 Mm (Depending On The Base). 5. Wrench Size (For Nut): 10 Mm Or 13 Mm (Depending On The Manufacturers Standard). 6. Material: High Strength Carbon Steel. 7. Coating: Zinc (Yellow Passivated Or Galvanized) For Protection Against Corrosion, Coating Thickness Of At Least 5 Microns. 8. Purpose: For Through Installation Of Heavy Structures, Cable Routes, Consoles, Railings And Metal Elements To Solid Building Materials (Concrete, Building Stone, Solid Brick). Additional Requirements: - The Product Must Be New, Without Signs Of Corrosion, Cracks On The Bushing Or Thread Defects. - The Movable Bushing Must Move Freely Along The Pin Until It Wedges. - Delivery Is Carried Out In Original Packaging With Mandatory Marking Of The Standard Size And Number Of Pieces. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Sledgehammer, 2Kg, Rubberized Handle - Blunt-Nosed Blacksmith Sledgehammer, Weight 2Kg Technical Specification: 1. Manufacturing Standard: Compliance With Gost 11402-75 (Or Equivalent For Plumbing Tools). 2. Weight Of The Head (Striker) Excluding The Handle: Not Less Than 2.0 Kg. 3. Shape Of The Striker: Forged, Blunt-Nosed, With A Square Or Rectangular Cross-Section. The Working Surfaces Of The Striker Must Be Smooth And Have A Ground And Chamfered Surface. 4. Head Material: Structural Or Tool Steel (Grades 45, 50, U7 Or Equivalent) Followed By Heat Treatment (Hardening). The Hardness Of The Working Surfaces Of The Striker Must Be At Least 48-52 Hrc To Prevent Flattening And Chipping. 5. Handle Material: Fiberglass (Fiberglass) With Rubberized Anti-Slip Coating. The Handle Must Have High Fracture Strength, Be Resistant To Moisture, Oils, And Aggressive Environments, And Effectively Absorb (Dampen) Vibration Upon Impact. 6. Fastening Design: Highly Reliable Fixation Of The Head On The Handle Using Epoxy Glue/Compound, Completely Preventing The Striker From Slipping Off During Operation. 7. Ergonomics: Anatomically Shaped Rubber Handle In The Grip Area For Secure Holding Of The Tool With One Or Two Hands. Additional Requirements: - The Product Must Be New, Without Cracks, Chips, Holes Or Casting/Forging Defects On The Metal Part. - Delamination Of Plastic And Peeling Of Rubber Coating Are Not Allowed On The Surface Of The Handle. - The Firing Pin Body Must Be Clearly Marked Indicating The Weight (2 Kg). The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Adhesive For Artificial Grass. Type Of Work: For External And Internal. Features: Waterproof. Composition: Solvent-Free Polyurethane Resin Based Adhesive. The Kit Includes Innopur 1Kg Hardener. A Two-Component Polyurethane Adhesive Designed For A Variety Of Applications On Carpet, Wood And Rubber Flooring. The Glue Provides Good Adhesive Resistance And Moisture Resistance. It Is Easy To Apply With A Notched Trowel And Cures Quickly. Used For Gluing Rubber Tiles, Parquet, Sandwich Panels And Other Coatings. The Adhesive Does Not Contain Solvents And Provides High Strength And Elasticity After Curing. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Black Wood Self-Tapping Screw 3.5 X 50 With A Large Pitch For Connecting Wooden Elements To Each Other Or Fastening Structures To Wooden Bases Or To Plasterboard. Black Carbon Steel Self-Tapping Screw, Phosphated. Thanks To Phosphating, The Self-Tapping Screws Should Be Resistant To Corrosion. Product Diameter - 3.5 Mm, Length - 50 Mm. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., A Spacer Sleeve Is A Specialized Mechanical Component Designed To Secure Bearings With Tapered Holes On Cylindrical Shafts. Design: The Spacer Has A Conical Shape With A Taper Angle Of 1:12, Which Meets International Standards. Material: Steel Bushing, Which Provides High Wear Resistance And Stable Operation. Application: Spacer Bushings Are Used To Ensure A Reliable Connection Between The Shaft And The Bearing. Inner Diameter: 12 Mm. Outer Diameter: 18–20 Mm. Length: 35Mm. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Planed Edged Beams 100 X 100 X 6000 Mm Made Of Softwood, Universal Lumber, Which Is Used In Low-Rise Private Housing Construction, In The Construction Of Bathhouses, Gazebos, Verandas, Utility And Domestic Buildings. Beam 100X100x6000 Mm For The Construction Of Roof Rafters, For The Construction Of Stairs, Floors, And Frame Elements. The Material Must Have Optimal Thermal Insulation Properties, Environmental Friendliness, And Safety Of Use. With Proper Care And Treatment, The Timber Should Not Be Affected By Insects And Have A Long Service Life. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Set Of Blades For A Stationery Knife - Width 18 Mm Number Of Blades In The Set - 10 Pcs Material - Steel. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Blunt-Nosed Blacksmith Sledgehammer, Weight 4 Kg Technical Specification: 1. Manufacturing Standard: Compliance With Gost 11402-75 (Or Equivalent For Plumbing Tools). 2. Weight Of The Head (Striker) Excluding The Handle: Not Less Than 4.0 Kg. 3. Shape Of The Striker: Forged, Blunt-Nosed, With A Square Or Rectangular Cross-Section. Working Surfaces Must Have A Smooth, Polished Surface. 4. Head Material: High Quality Tool Steel (Grade 45, 50, U7 Or Equivalent) Followed By Selective Hardening Of Working Areas To Prevent Chipping And Deformation Upon Impact. The Hardness Of The Working Surfaces Of The Striker Must Be At Least 48-52 Hrc. 5. Handle Material: Fiberglass (Fiberglass) With A Rubberized Coating, Which Has High Fracture Strength, Resistance To Oils, Gasoline And Organic Solvents. The Handle Should Effectively Dampen Vibration Upon Impact. 6. Fastening Design: Reliable Connection Of The Head To The Handle By Pressing Using A High-Strength Epoxy Compound, Which Prevents The Striker From Jumping Off During Operation. 7. Ergonomics: Anti-Slip Textured Handle In The Grip Area To Ensure Safety And Secure Holding Of The Tool With Both Hands. Additional Requirements: - The Product Must Be New, Without Cracks, Hairs, Holes Or Burrs On The Metal Part. - Delamination, Chipping And Peeling Of The Rubber Coating Are Not Allowed On The Surface Of The Handle. - The Marking Of The Tool Must Contain The Trademark Or Name Of The Manufacturer, As Well As The Weight Of The Striker. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Galvanized Roofing Self-Tapping Screw With Drill. Type: Roofing Screw. Purpose: Fastening Polycarbonate, Profiled Sheets And Other Sheet Materials To Metal Structures. Material: Steel. Coating: Galvanized, Anti-Corrosion. Diameter: 4.8 Mm. Length: 35 Mm. Tip: Drill. Head: Hexagonal. Key Size: 8 Mm. Thread: Full. Resistant To Weathering, Moisture And Temperature Changes. Designed For Outdoor Use. Compatible With 30Mm Diameter Clamp Washers. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Artificial Turf Splice Tape Is A Tape Used To Join Artificial Turf Rolls Together. Technical Characteristics: Tape Width 30Cm. The Tape Is Made Of Polyester, Which Ensures High Resistance To Temperature Changes And Mechanical Loads. Application: The Tape Is Used For Smooth And Strong Connection Of Joints, Preventing The Appearance Of Scuffing During Operation. The Tape Must Be Compatible With Artificial Turf Adhesive. The Tape Does Not Tear, Does Not Rot And Provides Reliable Fixation Of The Artificial Turf. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Washers For Polycarbonate, M5 - Galvanized Disc Pressure Washer With Seal. Type: Disc Pressure Washer. Material: Galvanized Steel. Shape: Cup-Shaped (Dish-Shaped), Stamped. Outer Diameter: 30 Mm. Hole Diameter: 5.5 Mm. Metal Thickness: Not Less Than 0.5 Mm. Sealant: Isolon (Foamed Polyethylene). Purpose: Fastening Polycarbonate Sheets To Metal And Wooden Structures Of Canopies, Gazebos And Other Structures. Compatible With Self-Tapping Screws With A Diameter Of 4.8–5.5 Mm. Coating: Galvanized, Anti-Corrosion. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Swing Chains Are Galvanized Or Chrome-Plated Hanging Elements Made Of Durable Steel That Can Support The Weight Of One To Several People, Ensuring The Reliability And Durability Of The Structure. Materials And Coating. Chains Are Made Of Alloy Or Chrome-Plated Steel. For Playgrounds, Galvanized Chains With Protective Braided Polyester Material Are Often Used, Which Prevents Corrosion And Increases Safe Hand Contact With The Suspension. The Galvanized Coating Ensures A Long Service Life Even In Outdoor Conditions And Exposure To Precipitation. Rod Diameter: 6 Mm. Link: 42×18 Mm. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, A Universal Tool Used For Cutting Paper, Cardboard And Other Materials. Blade Types: Metal Segmented Or Solid. Blade Width: From 18 To 25 Mm. Housing Material: Metal Or Plastic. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Universal Screw, Roofing 4.8*30 - Head - Hexagonal With Press Washer And Gasket, Thread - Rare Pitch. The Tip Is A Drill. Material – Steel, Coating – Zinc. The Metal-Wood Self-Tapping Screw Is Designed For Fastening Roofing Materials To Metal Structures While Maintaining Waterproofing. The Self-Tapping Screw Is Combined With A Press Washer And A Rubber Gasket For Roofing Work. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Black Wood Self-Tapping Screw 3.5 X 35 With A Large Pitch For Connecting Wooden Elements To Each Other Or Fastening Structures To Wooden Bases Or To Drywall. Black Carbon Steel Self-Tapping Screw, Phosphated. Thanks To Phosphating, The Self-Tapping Screws Should Be Resistant To Corrosion. Product Diameter - 3.5 Mm, Length - 35 Mm. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Steel Wire Rod With A Diameter Of 6 Mm In Coils (Coils) Manufacturing Standard: Compliance With Gost 30136-95 (Or Gost 2590-2006, Or Equivalent For Hot-Rolled Steel). Nominal Diameter: 6.0 Mm. Maximum Deviations In Diameter: In Accordance With Established Gost (No More Than +/- 0.3-0.5 Mm). Material Of Manufacture: Carbon Steel Of Ordinary Quality (Grades St0, St1, St2, St3 Of All Degrees Of Deoxidation According To Gost 380). Cooling Method: Single-Stage (Uo1), Two-Stage (Uo2) Accelerated Cooling Or Air Cooling (Ac). Delivery Form / Packaging: In Coils (Coils / Skeins). The Skein Must Consist Of One Continuous Piece. It Is Allowed To Wind From Two Sections In An Amount Of No More Than 10% Of The Lot Weight. Requirements For Surface Quality: The Surface Of The Wire Rod Should Not Have Holes, Sunsets, Cracks, Burrs And Visible Longitudinal Hairs That Reduce Its Strength Characteristics. A Light Layer Of Dense Rust Is Allowed, Which Does Not Interfere With The Visual Identification Of Defects. Additional Requirements: - The Product Must Be New, Unused, Stored In A Warehouse (Without Traces Of Deep Corrosion And Pitting Of The Metal). - Each Coil Must Be Tightly Tied In At Least Four Places And Have A Factory Label (Marking) Indicating The Manufacturer, Steel Grade, Diameter And Heat/Batch Number. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Body Washer Is Intended For Use In Fastening Joints During Assembly And Fixation Of Mounting Elements. The Product Is Used In Conjunction With Bolts, Nuts And Studs With Metric Threads Of The Appropriate Size. The Design Ensures Distribution Of The Tightening Force And Increases The Support Area In The Contact Area. Плоская Шайба Применяется В Резьбовых Соединениях Общего Назначения. The Product Is Made Of C45 Steel With A Galvanic Coating For Corrosion Protection. Подходит Для Болтов С Метрическим Размером М12. The Absence Of A Chamfer Ensures A Tight Fit Of The Washer To The Surface, Which Increases The Strength Of The Connections, And Also Avoids Arbitrary Unscrewing Of The Screw Under The Influence Of Vibration. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Size: M12x80 Mm (If The Eye Is Thicker - M12x90 Or M12x100 Mm). Strength Class: 8.8. Covering: Galvanized. - The Product Must Be New, Without Traces Of Rust, Cracks, Holes Or Damage To The Threads. - Delivery Is Carried Out In Original Packaging (Boxes/Boxes) With Mandatory Indication Of Weight Or Number Of Pieces. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Self-Locking Nut M12 With Nylon Ring - The Din 985 Nut Is A Hexagonal Fastener With An Integrated Nylon Insert That Ensures Reliable Fixation Of The Connection. Thanks To The Presence Of A Special Nylon Locking Ring, This Type Of Fastener Prevents Spontaneous Unwinding Even Under Significant Vibration Loads. The Design Feature Of Din 985 Is The Presence Of A Nylon Insert Located Inside The Threaded Hole. When Tightened, The Nut Compresses The Nylon Ring, Which Fits Tightly Against The Threads Of The Element Being Connected. This Creates Additional Friction That Prevents The Connection From Unwinding. Areas Of Application The Scope Of Use Covers: • Mechanical Engineering; • Machine Tool Industry; • Instrument Making; • Automotive Industry; • Construction; • Production Of Industrial Equipment. Advantages Of Use Key Advantages Of Din 985 Torque-Dominant Nuts: • Reliable Fixation Under Vibration Loads. • Resistance To External Influences. • Wide Operating Temperature Range. • Long Service Life. • No Need For Additional Locking Means. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Construction Steel Scrap 1500X30 Mm Technical Specification: 1. Manufacturing Standard: Compliance With Gost 1405-83 (Or Equivalent For Construction Hand Tools). 2. Scrap Length: Not Less Than 1500 Mm. 3. Diameter (Thickness) Of The Section: Not Less Than 30 Mm. 4. Material: High Strength Carbon Steel (Steel 45, Steel 50 Or Equivalent) Made Entirely From Solid Metal Rod (Not Hollow). 5. Design Features And Shape Of Working Ends: - At One End There Is An Acute-Angled Tetrahedral Conical Sharpening (Conical Point / Pencil); - At The Other End There Is A Flat Blade (Chisel-Shaped Sharpening) With An Angle Of Inclination To Create Leverage. 6. Heat Treatment: The Working Ends Of The Scrap (Tip And Blade) At A Length Of At Least 60-150 Mm Must Be Subjected To Heat Treatment (Hardening) To Ensure A Hardness Of At Least 40-47 Hrc, Which Prevents Rapid Dulling, Creasing And Deformation When Working With Hard Soils And Concrete. 7. Body Coating: Protective Paint Or Powder Coating (Except For Sharpening Work Areas) To Prevent Corrosion During Storage And Outdoor Use. Additional Requirements: - The Product Must Be New, Unused, Free Of Cracks, Hairs, Hardening Defects, Burrs And Rust. - The Body Of The Scrap Must Be Straight, Without Longitudinal Or Transverse Curvatures. - Delivery Is Carried Out In Batches In Reliable Packaging, Eliminating Injury During Transportation. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Cutting Discs Ø125, 1.2*22.23 - Cutting Wheel Designed For Precise And High-Quality Cutting Of Various Metals: Cast Iron, Stainless Steel, Etc. Made On High-Quality Bakelite Bond, It Can Be Used Under Heavy Loads And At High Speeds. The Disc Is Characterized By Uniform Grinding Of The Working Part And Almost Complete Absence Of Heating In The Cutting Area, Due To Which It Is Designed For A Long Period Of Use. Characteristics: Application Surface Material: Metal Bore Diameter (Mm): 22.23 Diameter (Mm): 150 Disc Thickness (Mm): 1.4 Maximum Rotation Speed (Rpm): 13300 Shape: Straight Disc Type: Cutting Disc. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Black Wood Self-Tapping Screw 3.5 X 80 With A Large Pitch For Connecting Wooden Elements To Each Other Or Fastening Structures To Wooden Bases Or To Plasterboard. Black Carbon Steel Self-Tapping Screw, Phosphated. Thanks To Phosphating, The Self-Tapping Screws Should Be Resistant To Corrosion. Product Diameter - 3.5 Mm, Length - 80 Mm. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, Pre-Agreed The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Metal Dustpan With Long Handle Purpose: Equipment For Collecting Small And Large Waste During Cleaning Work In Residential, Industrial, Office Premises And Adjacent Areas. Manufacturing Material Of The Working Part (Bucket): Thin-Sheet Carbon Steel (Metal), Resistant To Deformation, Mechanical Loads And Shocks During Operation. Coating: Durable Protective And Decorative Polymer (Powder) Or Enamel Coating Over The Entire Body Of The Product To Reliably Protect The Metal From Moisture, Household Chemicals And Corrosion. Design Features Of The Bucket: The Presence Of Curved Sides On Three Sides To Prevent Spillage Of Collected Debris And A Smooth Flat Edge Of The Working Edge For A Tight Fit To The Floor And Effective Collection Of Fine Dust. Handle (Shaft): - Handle Design: Long, Rigidly Fixed To The Bucket Body By Welding Or Reliable Rivet Connection (Non-Removable Design); - Handle Material: Metal Or Durable Plastic; - Handle Length: At Least 46 Cm; - Ergonomics: The Presence At The End Of The Handle Of A Special Plastic Tip-Cap Or Technological Hole For Easy Hanging Of The Tool During Storage. Additional Requirements: - The Product Must Be New, Unused, Without Cracks, Dents, Chipped Protective Coatings Or Traces Of Rust. - Delivery Is Carried Out In The Original Packaging Or Manufacturer’S Packaging, Ensuring The Safety Of The Appearance And Geometry Of The Product During Transportation. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Polypropylene Round Stackable Broom (Reinforced) Complete With Handle Purpose: For Cleaning Work In Open And Closed Areas, Removing Dry And Wet Debris, Leaves, Dirt And Snow. Broom Design: Round, Stacked, Reinforced Rigidity. Consists Of A Plastic Block (Cap) And Flanges. Number Of Flanges (Rings) - At Least 5 Pcs. Method Of Fastening The Pile: The Bristles Must Be Fastened Together By Fusion To Prevent Shedding And Scattering Of The Pile Under Intense Mechanical Loads. Pile Material: High Quality Soft Virgin Polypropylene. The Pile Must Be Resistant To Abrasion, Deformation, Breakage And Moisture. Weight And Size Characteristics Of The Working Part: - Weight Of Polypropylene Pile: At Least 385–400 Grams; - Length Of Pile (Hair): At Least 35 Cm (Total Length Of Pile Before Fusion - Up To 70 Cm). Handle (Handle): - The Presence Of A Cutting In The Kit: Required; - Handle Material: Natural Hardwood (Birch), Carefully Dried, Sanded, Without Knots, Cracks Or Burrs; - Length Of The Cutting: Not Less Than 120 Cm. General Dimensions Of The Assembled Product: Total Length Of The Product (Broom With Handle) - No Less Than 150 Cm. Weight Of The Assembled Product - No Less Than 850 Grams. Operating Properties: Durability Of The Structure, Resistance To Temperature Changes, All-Season Use. Additional Requirements: - The Product Must Be New, Unused, Without Defects In Plastic Molding And Chips On The Wooden Handle. - Delivery Is Carried Out In Secure Packaging Or Packaging That Ensures Safety During Transportation. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Firemans Carbine With Coupling (Nut) - Firemans Carbine With Lock Din 5299D Connecting Link With An Opening Segment For Quickly Fastening Objects To Cables, Ropes And Chains. The Knurled Coupling Nut Allows You To Securely Lock The Device And, If Necessary, Quickly Open It. This Spring Latch Locking System Prevents Accidental Opening Of The Shutter During Jerking And Vibration Loads. Size: 10×100 Mm. Working Load: Not Less Than 300 Kg. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Board 30*100*6000, Fresh Wood For Use In Furniture Production, Construction And Repair, Automotive Industry, Shipbuilding. It Is In Demand For The Construction And Reconstruction Of Roofs, Cladding Of Building Facades, Interior Decoration, And Flooring. Also For The Construction Of Buildings And Enclosing Structures. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Reinforcement Is A Universal Building Material Used For Reinforcing Foundations, Screeds, Frames And Other Structures. Corrugated Steel (A3, A500c) - Used For Reinforcing Concrete Structures, Provides Good Adhesion To Concrete And High Strength. Diameter 10 Mm. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Reinforcement Is A Universal Building Material Used For Reinforcing Foundations, Screeds, Frames And Other Structures. Corrugated Steel (A3, A500c) - Used For Reinforcing Concrete Structures, Provides Good Adhesion To Concrete And High Strength. Diameter 12 Mm. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Flat Paint Brush With Natural Bristles, For Uniform Application Of Paints And Varnishes And Excellent Coating Quality. Width 50Mm. Wooden Handle For Convenience And Comfort In Use, Durability, And Reliability Of The Tool. Should Be Convenient For Storage And Transportation. The Brush Should Be A High-Quality And Reliable Tool For All Types Of Paints And Varnishes, Which Will Ensure Uniform And Accurate Application Of Paint To The Surface. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, A Brushless Cordless Hand-Held Circular Saw Should Be Equipped With A Modern Brushless Motor Capable Of Rotating The Saw Blade Up To 6000 Rpm. Designed For Cutting Various Types Of Building Materials, Such As Wood, Aluminum, Ceramic Tiles, Laminated Boards, Parquet. The Compact Body Should Allow You To Work Comfortably With One Hand. Maneuverable Saw For Working In Hard-To-Reach Places. Motor Type: Brushless. Power Type: Battery Battery Type: Li-Ion. Battery Device: Slider. Battery Voltage: 21 V. Battery Capacity: 4 Ah. Number Of Batteries Included: 1. Disc Diameter: 145 Mm. Disc Mounting Diameter: 20 Mm. Number Of Cutting Teeth: 24 Pcs. Disc Location: To The Left Of The Handle. Max. Cutting Depth At An Angle (90°): 52 Mm. Max. Cutting Depth At An Angle (45°): 32 Mm. Adjustable Cutting Depth: Yes. Max. Number Of Revolutions: 6000 Rpm. Availability Of Soft Start: Yes. Spindle Lock: Yes. Unintentional Start-Up Protection: Yes. Overload Protection: Yes. Jam Protection: Yes. Keyless Replacement Of Equipment: No. Availability Of A Pipe For Connecting A Vacuum Cleaner: Yes. Base Material: Steel. Battery Platform: 21Vmax Alteco Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Welding Electrodes Are The Main Consumable Material With Which The Welding Process Is Carried Out. It Is A Rod Made Of Electrically Conductive Material, Which Allows You To Supply Current To The Surfaces Being Welded. Electrode Type: For Manual Arc Welding, Coating Type: Rutile. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Cellular Polycarbonate Is A Modern Building Material That Is Used To Create Roofing Coverings. It Consists Of Panels Of Several Thin Sheets Connected By Longitudinal Stiffeners, Which Ensures Its Strength And Light Transmittance. Type: Cellular (Cellular) Polycarbonate. Purpose: Installation Of Roofs For Gazebos, Canopies, Bus Stops And Other Small Architectural Forms. Sheet Thickness: 8 Mm. Color: Brown. Density: No Less Than 1.5 Kg/M². The Presence Of A Protective Uv Layer Against Ultraviolet Radiation. Light Transmission: No Less Than 75%. Sheet Width: 2100 Mm. Sheet Length: Not Less Than 6000 Mm. The Material Is Resistant To Precipitation, Ultraviolet Radiation And Temperature Changes. Operating Temperature: From -40°С To +120°С. The Surface Is Free Of Cracks, Chips, Delaminations And Other Defects. Delivery In Factory Protective Film. The Product Is New, Not Used. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Hex Head Bolt M8x100 - Hex Head Bolt M8x100 Technical Specification: 1. Manufacturing Standard: Compliance With Gost 7798-70 (Or Din 931 / Din 933, Or Equivalent). 2. Nominal Thread Diameter: 8Mm (M8). 3. Thread Pitch: Large (Main) - 1.25 Mm. 4. Bolt Length (Excluding Head): 100 Mm. 5. Head Shape: Hexagon. 6. Key Size: 13 Mm. 7. Strength Class: Not Lower Than 5.8 (Average Strength For General Construction And Repair Work). 8. Coating: Zinc (Galvanic Plating) For Protection Against Corrosion, Coating Thickness Of At Least 6 Microns. 9. Thread Design: Full Or Partial (According To The Length Standard For Din 931/933). Additional Requirements: - The Product Must Be New, Without Traces Of Rust, Cracks, Holes Or Damage To The Threads. - Delivery Is Carried Out In Original Packaging (Boxes/Boxes) With Mandatory Indication Of Weight Or Number Of Pieces. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Profile Pipe 40*40 (2.0Mm) 6M. - Square Pipes Made Of Alloys Characterized As Alloyed Carbon Steels. To Strengthen The Airtight, Strength And Heat-Resistant Characteristics, For Use In Metal Structures And Other Metal Elements: Frames, Fences, Fences, Gates, Awnings And Much, Much More. The Pipe Inside Must Be Hollow. Must Be Weldable And Bendable For Welded Products And Structures. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Enlarged (Reinforced) Body Washer M8 Technical Specification: 1. Manufacturing Standard: Compliance With Gost 6958-78 (Or Din 9021, Or Equivalent). 2. Nominal Thread Diameter Of The Mating Part: 8 Mm (M8). 3. Inner Diameter Of The Washer: Not Less Than 8.4 Mm. 4. Washer Outer Diameter: At Least 24.0 Mm (Increased Size To Distribute Pressure On The Surface). 5. Washer Thickness: Not Less Than 2.0 Mm. 6. Material: Carbon Steel. 7. Coating: Zinc (Galvanic Plating) For Protection Against Corrosion, Coating Thickness Of At Least 6 Microns. Additional Requirements: - The Product Must Be New, Without Signs Of Corrosion, Scale, Burrs, Cracks Or Curvature. - Delivery In Durable Original Packaging With Clear Markings (Name, Standard, Quantity/Weight). The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Set Of Keys (216 In 1), Flat Paint Brush With Natural Bristles, For Uniform Application Of Paints And Varnishes And Excellent Coating Quality. Width 100Mm. Wooden Handle For Convenience And Comfort In Use, Durability, And Reliability Of The Tool. Should Be Convenient For Storage And Transportation. The Brush Should Be A High-Quality And Reliable Tool For All Types Of Paints And Varnishes, Which Will Ensure Uniform And Accurate Application Of Paint To The Surface. Place Of Delivery - Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan, Artificial Lawn Is Ideal For Decorating Various Areas: Cottages, Houses, Streets, Playgrounds. Pile Height: 20Mm. The 100% Polypropylene Coating Is Easy To Clean From Dust And Dirt, And Its High Density - At Least 6000 Dots Per Square Meter - Ensures A Long Service Life. Rolled Turf Looks Like Real Grass And Is Ideal As An Outdoor Mat. It Is Resistant To Mechanical Stress And Does Not Require Special Care, Which Makes It An Original Solution For Decorating A Balcony Or Gazebo. Resistant To Sun And Rain, Does Not Fade And Remains Green All Year Round. Safe For Children And Pets, Pleasant To The Touch. Easy To Install, Durable And Practical Option For Landscaping. Does Not Depend On Temperature Changes, Easily Passes Water Without Forming Stagnant Areas. Elastic Turf Material Provides Soft Gliding. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., River Or Alluvial Sand. It Has Small Rounded Grains And Practically Does Not Contain Foreign Inclusions Such As Clay, Silt And Debris. It Has High Natural Humidity, Which Ensures Good Molding And Prevents Dusting. Sand For Childrens Sandboxes Must Meet Three Main Criteria: Safety. Screened Sand Is A Safe Choice For A Childs Sandbox. The Sand Must Undergo Special Heat Treatment To Destroy Infections And Bacteria, And Also Not Contain Sharp Or Cutting Objects. Ecological Cleanliness. The Sand Must Be Free From Chemical Impurities And Dust That Cause Allergies In Children. Aesthetic Appearance. The Sand Should Be Dry, Homogeneous, Without Clay, Shells And Pebbles, Without Lumps Of Dirt. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Self-Locking Nut (Self-Locking Nut) M8technical Specification:1. Manufacturing Standard: Compliance With Din 985 (Or Gost R 50273-92, Iso 10511, Or Equivalent).2. Nominal Thread Diameter: 8 Mm (M8).3. Thread Pitch: Large (Main) - 1.25 Mm.4. Design Feature: The Presence Of A Locking Element - A Non-Metallic (Nylon/Plastic) Ring-Liner To Prevent Self-Unscrewing.5. Head Shape: Hexagonal.6. Key Size: 13 Mm.7. Strength Class: Not Lower Than 6.0 Or 8.0 (To Ensure Reliability Of The Threaded Connection).8. Material And Coating: Carbon Steel With Zinc (Galvanic) Coating For Protection Against Corrosion. Additional Requirements: - The Product Must Be New, Without Signs Of Mechanical Damage, Thread Deformation Or Rust. - The Inserts Must Be Firmly Fixed Inside The Nut And Not Fall Out. - Delivery Is Carried Out In Original Packaging Indicating The Quantity (Pieces) Or Weight Of The Lot. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Enamel Is Intended For Painting Metal, Wooden And Concrete Surfaces Used In Atmospheric Conditions And Indoors (Exterior Walls, Facade Elements, Benches, Fences, Window Frames, Doors, Openings, Window Sills). After Drying, It Should Form A Particularly Durable Semi-Matte Coating, Resistant To Atmospheric Influences And Temperature Changes. The Paint Color Should Be Agreed With The Customer. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Rubber-Fabric Conveyor Belt (Ep Frame), Wear-Resistant, Intended For Use As A Protective Covering On Childrens Playgrounds, Resistant To Atmospheric Influences And Mechanical Wear. Technical Characteristics Of The Material: Thickness: Not Less Than 20 Mm, Width: Not Less Than 800 Mm, Density: Not Less Than 1.2 G/Cm³, Frost Resistance: Not Less Than –40°C, Abrasion Resistance: High; Color: Black. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Profile Pipe 30*30 (2.0Mm) 6M. - Square Pipes Made Of Alloys Characterized As Alloyed Carbon Steels. To Strengthen The Airtight, Strength And Heat-Resistant Characteristics, For Use In Metal Structures And Other Metal Elements: Frames, Fences, Fences, Gates, Awnings And Much, Much More. The Pipe Inside Must Be Hollow. Must Be Weldable And Bendable For Welded Products And Structures. The Place Of Delivery Is Karaganda Region, Temirtau, Respubliki Avenue, 13A, The Goods Must First Be Agreed Upon With The Customer, With The Provision Of Documents Confirming The Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan.
|
