|
Supply of Various instruments for CHP BOP area of WTPS Unit 8.- over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, s: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 s @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2 npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm
|
