|
Base For Photoelectric Relay, 360° Closed Model, With Abnt Standard Hot Dip Galvanized Rod, Curved Arm In Sae 1020 Galvanized Steel For Public Lighting With Fitting Of 48.3 Mm (External Diameter), Projection 1.5 M, Tube Wall Thickness 2.5 Mm, According To Ceip. Technical Specifications, Arm Curved In Hot Dip Galvanized Steel For Led Public Lighting, With Shoe, 48 Mm Fitting (Outer Diameter), 2.5 M Long Projection And 2 Thickness Tube Wall, Insulated Piercing Derivation Connector Cdp 70 Main: 10-95 Mm² Derivation: 1.5 - 10 Mm², Nominal Adjustment Torque: 8 N.M., Insulated Piercing Derivation Connector Cdp 95 Main: 16 – 95 Mm² Derivation: 4 – 35 Mm²., 1-Screw Parallel Connector, French Screw 5/8 With 1 Screw For Luminaire., E27 Support With 2 Screws For Luminaire., 150W 220V E40 Tubular Lamp, Sodium, With Average Life Of 32,000 Hours And Luminous Flux Of 17,290 Lumens. The Procel Seal Report Granted To This Lamp Must Be Attached To The Proposal., 400 W Metallic Ballast, For External Use 220V 60 Hz With High Power Factor, With Painted Mug Without Base For Relay And Photoelectric., External Sodium Vapor Ballast 250 W 220 V 60 Hz High Power Factor, With Mug Painted Without Base For Relay And Photoelectric With Procel/Inmetro Seal Stamped On The Product. The Report Of The Procel Seal Granted To This Reactor Must Be Attached To The Proposal., Internal Sodium Vapor Reactor 70 W A. P. Voltage 220 V 60 Hz, Measuring 7 Cm Wide X 14.5 Long X 7 Cm High With Procel Seal Stamped On The Product And With Painted Mug. Screws To Fix Luminaire, 200 Mm Clamp, With 03 Screws To Fix Luminaire., 220 Mm Clamp, 230 Mm Clamp, 250 Mm Clamp With 03 Screws To Fix Luminaire, 260 Mm Clamp With 03 Screws To Fix Luminaire., 270 Mm Clamp With 03 Screws To Fix The Luminaire, 280 Mm Clamp, 300 Mm Clamp, Ar11 Fire Galvanized Frame (1 Insulator), Ceee Standard With Pulley Insulator, 220V 50Hp Contactor, 220V 25Hp Contactor, 250 W Metallic E40 Lamp, 400 W Lamp Metallic E40., 250W 220V E40 Tubular Lamp, With Average Life Of 32,000 Hours And Luminous Flux Of 35,000 Lumens. The Procel Seal Report Granted To This Lamp Must Be Attached To The Proposal. Ceip-3 Public Luminaire, Closed For Vsap 100 Watt And 150Watt Lamp, Consisting Of An Injected Aluminum Body; Electrostatic Painting With Polyester Powder Paint, Protected Against Uv Rays; Reflector Made From A Single Stamped Aluminum Plate, Chemically Polished And Anodized, With A Minimum Thickness Of 1 Mm, With A High Degree Of Purity (99.5%), With Housing For Auxiliary Equipment (Reactor, Capacitor, Ignitor) With Base For Photo Electronic Relay; The Reflector Must Be Independent Of The Luminaire Body; Optical Group Closing Diffuser In Smooth Injected Polycarbonate With Protection Against Uv Rays And With Sealing Gasket In Non-Degradable Material; E-40 Thread Lamp Holder In Reinforced Porcelain, According To Nbr 60238/2006 And Nbr Iec 60598-1; The Luminaire Must Allow The Use Of An Integrated Reactor Together With The Capacitor And The Igniter; With Quick Connector (Removable Kit), Male; Arm Attachment System, Smooth Fitting Type, Compatible With Arm With An External Diameter Of 48.3 Mm; Arm Attachment Screws
|