|
Ca-50 Steel - 6.3 Mm (1/4) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Category Ca-50 (Characteristic Yield Resistance F = 500 Mpa Or 50 Kgf/Mm). Ribbed (Corrugated) Surface To Ensure Optimal Adhesion To Concrete., Ca-50 Steel - 8.0 Mm (5/16) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-50 Steel - 10.0 Mm (3/8) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-50 Steel - 12.5 Mm - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-60 Steel - 5.0 Mm - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Category Ca-60 (Characteristic Yield Resistance F = 600 Mpa Or 60 Kgf/Mm). Ribbed (Corrugated) Surface To Ensure Optimal Adhesion To Concrete., Mechanical Smooth Steel Round Bar (Diameter 25.0 Mm - Approx. 1). Hot Rolled Solid Carbon Steel Bar, Circular Cross Section And Smooth Surface (Without Ribs)., Weatherable Steel (Application: Sheets | Standards: Astm A-588/Nbr-5008) - Weatherable Steel For Sheets, Supplied With Manufacturers Quality Certificate, Containing Minimum Required Chemical Composition And Mechanical Properties., Wire Galvanized No. 14 Bwg, Annealed Wire 18 Bwg, Angle 1 1/4 Hot Rolled Carbon Steel, Hot Rolled Carbon Steel Sheet, Structural Quality, Gauge 3/16, E =4.75 Mm (37.29 Kg/M2), No. 11 Folded Steel Sheet (3.00 Mm), No. 13 Folded Steel Sheet (2.25 Mm), No. 14 Flat Sheet Tray Type (Cut/Folded), Profiled Sheet 1/4, Profiled Sheet 3/16, Profiled Sheet No. 18, Made Of Laminated Carbon Steel, Intended For Structural Or Closing Applications, According To Usual Metal Construction Practices., Scored Sheet No. 14 Tray Type (Cut/Folded), Made Of Laminated Carbon Steel, Mechanically Formed, Intended For The Manufacture Of Trays, Gutters Or Auxiliary Structural Elements., Spacer / Circular Spacer With Side Entry, In Plastic, For Rebar *4.2 To 12.5* Mm, Coverage 20 Mm, Angle Iron 1/8 3/8 (Full), Clamp For 1/4 Steel Cable, Flat French Hand Made Of Galvanized Steel 726 Mm, Metalon 20 75 Mm, H = 200 Mm, L = 75 Mm (9, 94 Kg/M), E = 2, 65 Mm, H = 75 Mm, L = 40 Mm (3, 04 Kg/M), E = 3 Mm, H = 125 Mm, L = 50 Mm (5, 07 Kg/M), Galvanized Steel Top Hat Profile, Used In Light Metallic Structures, Closures, Supports And Auxiliary Elements, With Surface Protection Against Corrosion., *20 Ribbed, Ca-60, Q-196, (3.11 Kg/M2), Wire Diameter = 5.0 Mm, Width = 2.45 M, Mesh Spacing = 10 2 M, Wire 3.4 Mm (10 Bwg), Mesh Wire Mesh 4 Wire 12, Iron Coin Screen, Width 0.50M, Galvanized Steel Tube With Seam, Medium Class, Dn 1.1/4, E = *3.25* Mm, Weight *3.14* Kg/M (
|
