|
Galvanized Sheet Gutter N°26 (Thickness 0.50 Mm), With A Development Of 40 Cm, Including Supplied Galvanized Sheet Gutter N°26 (Thickness 0, Including Supply, Measurement, Manufacturing And Installation. An On-Site Measurement Must Be Carried Out Before Manufacturing For Checking And Adapting The Actual Dimensions Of The Site. The Installation Must Take Into Account The Sealing With Polyurethane Sealant (Pu) At The Seams And Attachment Points, As Well As The Supply And Application Of All Necessary Accessories, Such As Galvanized Screws, Supports, Angles, Clamps And Other Items For Safe Fixation, Manual And Vertical Lifting Of The Material. Rainwater, With A Perfect Finish, Without Leaks, Respecting Current Technical Standards And Good Engineering Practices. The Entire Service Must Also Include The Cleaning Of The Site, The Adequate Disposal Of Waste Generated By The Installation And The Replacement Of The Tiles On The Roof., With Development Of 50 Cm, Manufacturing And Installation. Suitability Of The Actual Dimensions Of The Site. The Installation Must Include The Gutter In Galvanized Sheet N°26 (Thickness 0, With A Spread Of 60 Cm, With A Spread Of 80 Cm, A Gutter In Galvanized Sheet N°26 (Thickness 0.50 Mm), With A Spread Of 33 Cm, Including The Supply Of A Gutter In Galvanized Sheet N°26 (Thickness). 0.50 Mm), Manufacturing And Installation. An On-Site Measurement Must Be Carried Out Before Manufacturing To Check And Adapt The Dimensions To The Actual Site Conditions. N°26- Supply And Installation Of Rectangular Conductor In Galvanized Sheet N°26, For A Section Area D Supply And Installation Of Rectangular Conductor In Galvanized Sheet N°26, For A Section Area Of 4,418 M² (Corresponding To A Circular Tube Area Of 75 Mm), Supply And Installation Of Rectangular Conductor In Galvanized Sheet N°26. A Section Area Of 7,854 Mm² (Corresponding To A Circular Tube Area Of 100 Mm), Flashing And Counterflashing In Galvanized Sheet No. Adaptation Of The Parts To The Actual Conditions Of The Building. The Installation Must Include Manual And Vertical Lifting Of The Material, As Well As The Correct Positioning And Fixing Of The Parts, With Sealing Of The Joints Using Polyurethane Sealant (Pu) Or Equivalent. All Necessary Accessories, Supports And Other Items That Guarantee Stability And Watertightness Must Be Provided. Strictly Follow Good Installation Practices, Ensuring Protection Against Infiltration And Durability Of The Assembly., With Development Of 25 Cm, Manufacturing And Installation Service
|
