|
Rear Fixed Agricultural Brushcutter, Fixed Rear Type, New, First Use, Intended For Carrying Out Mowing And Maintenance Services For Green Areas, Pastures, Public Roads And Other Places That Require Small And Medium Size Vegetation Cutting. The Equipment Must Be Attachable To Agricultural Tractors Using A 3 (Three) Point Hydraulic System (Category Ii Or Higher), Driven By The Tractors Power Take-Off (Tdp), With A Rotation Of 540 Rpm, Being Compatible With Tractors With A Minimum Power Of 50 Hp. It Must Meet The Following Minimum Characteristics:Cutting Width: Minimum 1.70 Meters Cutting System: Composed Of At Least 2 (Two) Knives Or Rotary Knives, Made Of High-Strength Steel, With Heat Treatment Cutting Height: Adjustable, Approximately Between 50 Mm And 200 Mm Transmission System: By Gearbox Or Belts, With A Free Turning Structure: Reinforced In Steel, With Metallic Rear Protection And/Or Chains Against Projecting Materials Support System: Equipped With Adjustable Rear Wheel And Shoes/Side Sliders Weight: Approximate, Minimum Of 400 Kg Working Speed: According To The Manufacturers Specification Dimensions: Compatible With The Cutting Width, With Approximate Dimensions Of Up To 2, 30 M In Length, 2.00 M In Width And 1.20 M In Height, It Must Be Supplied With All The Necessary Accessories For Operation, Including Cardan With Protection And Other Safety Devices. Minimum Guarantee, Hydraulic Articulated Slope Brushcutter, Intended For Carrying Out Mowing Services In Areas That Are Difficult To Access, Such As Banks Of Roads, Slopes, Slopes, Slopes, Ditches And Fences, Enabling Operation With Lateral Reach And Cutting At Different Angles. The Equipment Must Be Attachable To Agricultural Tractors Through The 3 (Three) Point Hydraulic System (Category Ii Or Higher), With Activation By The Power Take-Off (Tdp) At 540 Rpm, Being Compatible With Tractors With A Minimum Power Of 75 Hp. Must Meet The Following Minimum Characteristics:Cutting Width: Minimum 1.50 Meters Cutting System: Composed Of 2 (Two) Retractable Knives Made Of High-Resistance Steel, Minimum 20 Mm Lateral Reach: Minimum 4.00 Meters Operational Capacity: Able To Carry Out Cutting In Horizontal And Vertical Planes, Including On Slopes And Slopes Hydraulic System: Equipped With Relief Valves In Each Circuit Control System: Controlled By Joystick Or Equivalent System Cooling System: With Hydraulic Oil Radiator Or Equivalent System Structure: Reinforced In Steel, With Cutting Unit Protection And Operator Protection Screen Lateral Displacement: Minimum Of 1.00 Meters In Relation To The Tractor Axle Weight: Approximate Between 1,200 Kg And 2,000 Kg, Compatible With The Size And Robustness Of The Equipment Working Speed: Recommended Between 3 And 7 Km/H Dimensions: Co..., Three-Point Agricultural Sprayer, New, Intended For The Application Of Agricultural Pesticides, Herbicides, Insecticides, Fungicides, Foliar Fertilizers And Other Compatible Products In Rural Areas, Green Areas, Nurseries, Gardens And Other Activities Developed By The Municipality. The Equipment Must Meet The Following Characteristics: Minimum Reservoir Capacity Of 600 (Six Hundred) Liters; Reservoir Made Of Polyethylene Or Equivalent High-Resistance Material; Spray Bar With A Minimum Width Of 12 (Twelve) Meters; Articulated System For Transport And Operation Of
|
