Bids Are Invited For Prices For Possible Future Permanent Equipment For Public Lighting in Brazil

Work Detail

Motorized Calender For Sheet Metal: Minimum Configurations Accepted For Industrial Equipment Intended For Metal Forming, With Calendering Capacity For Sheets Up To 3/16 (4.76 Mm) Thick And A Usable Working Width Of 120 Cm (1200 Mm). Composed Of 5 Diameter Rollers And 25 Mm Support Shafts. The Drive System Must Be Composed Of A Three-Phase Gear Motor With A Minimum Power Of 1.5 Hp And A Reduction Ratio Of 1:80. The Equipment Must Have A Mechanical Or Hydraulic Tensioning System For Pressure Adjustment. 1300 Mm Working Size. Robust Structure Composed Of 6 Diameter Rollers And 50 Mm Reinforced Shafts, Guaranteeing Rigidity And Stability. Drive System Consisting Of A 2.0 Hp Three-Phase Gear Motor With A Reduction Ratio Of 1:80. The Equipment Must Have An Integrated Mechanical Or Hydraulic Tensioning System For Precise Pressure Adjustment, And A Side Opening System For Extracting Formed Parts (Tumbling). Of Segmented Upper Rulers (Removable And Displaceable Nails), Allowing The Execution Of Folds In The Shape Of Lids And Trays With Flaps Of A Maximum Height Of Up To 35 Mm. The Equipment Must Have A Tightening And Lifting System Using Adjustable Levers, In Addition To Specific Adjustments For Different Sheet Thicknesses. Minimum Bending Capacities: Carbon Steel (Sae 1020) Up To 1.2 Mm, Stainless Steel (304) Up To 0.8 Mm, Aluminum And Polycarbonate Up To 3.0 Mm And Brass Up To 1.2 Mm. Metal Structure With Approximate Weight Of 100 Kg, Total Length Of 1410 Mm And Industrial Paint Finish. It Must Necessarily Accompany A Support (Pedestal) Suitable For Operation, Guaranteeing A Working Height Of Approximately 1170 Mm, Model Lufemak Lf-1300Lc Or Technical Equivalent., Vertical Hydraulic Pipe Bender: Minimum Accepted Configurations, Equipment With Manual Hydraulic Drive, Pressure Capacity Of At Least 9 Tons, Designed For Bending Cold Processing In Carbon Steel, Galvanized And Copper Tubes. Working Capacity For Tubes With A Diameter Of 1/2 To 2. Must Allow Bending Angles Of 0º To 90º. The Set Must Be Supplied With 06 Cast Iron Dies In Measurements: 1/2, 3/4, 1, 1.1/4, 1.1/2 And 2. Steel Structure With Tripod Or Pedestal Type Base For Operational Stability. Reference Marcon 4502 / Nagano Ncdt9t Or Technical Equivalent, Mechanical Motorized Guillotine: Minimum Accepted Configurations, Industrial Equipment For Cutting Metal Sheets With Useful Cutting Length Of 1200 Mm To 1300 Mm. Minimum Cutting Capacity For Carbon Steel Sheets (Sae 1010/1020) Up To 3.2 Mm (1/8) And Stainless Steel Up To 1.5 Mm. Driven Via Three-Phase Electric Motor (Minimum 3 Hp) With Mechanical Brake/Clutch System. Welded Steel Monoblock Structure For Maximum Rigidity. Mandatory Requirements: Automatic Plate Press With High Pressure Springs, Rear Limiter (Backgauge) With Precision Manual Adjustment, Millimeter Side Square, Knife Set In Aisi D2 Steel (High Chrome And

Contact Information