|
Lock Zn 1 - 3 Copper Overhead Cylinder. Advantages: The Lock Has Increased Security. Equipped With Two Steel Bolts With A Diameter Of 14 Mm. Closes With 1 Or 2 Turns. Corresponds To Class 2 According To Gost 5089 - 2011. Characteristics: Recommendations For Doors: Wooden And Metal 8-775-894-27-63, Protective, Solder Mask For Printed Circuit Boards, Varnish For Restoring The Protective Mask Of Printed Circuit Boards. Hardens Under The Influence Of Ultraviolet Radiation. Varnish For Restoring The Mask, Necessary When Restoring Bga Nickels Of Installation. Hardens Under The Influence Of Ultraviolet Radiation. An Irreplaceable And Very Useful Consumable Material For Repairing Laptops, Computers And Other Equipment. Will Help Restore The Motherboard After Burnout Of Field Chips Or Other Elements, After Which The Motherboard Textolite Is Damaged. Specifications: Mask Color: Green. Type: One-Component, Uv-Curing. Container Capacity: Syringe, 10Cc. 8-775-894-27-63, Additional Features Handle Material Plastic Dimensions No Less And/Or No More Than 26X15x17 Cm Equipment: Soldering Station, Soldering Iron, Soldering Iron, Tweezers (6 Pcs), Desoldering Pump, Additional Heater, Hair Dryer, Soldering Iron Heater, Nozzles For Soldering Iron (4 Pcs) Additional Information Soldering Station General Characteristics Type Soldering Station Power Not Lower Than 700.0 W Smooth Power Adjustment Power Supply Supply Voltage 220 V Functions Of Soldering Station Soldering Iron Specifications Heater Type Not Lower Than Nichrome Max. Heating Temperature Not Lower Than 480.0 °C Thermal Stabilization 8-775-894-27-63, Type Of Solder Is Hard (Refractory) Section/Diameter1.5 Mm Wire Form Without Flux Composition This Product Is Intended For Removing Tin Weight Not Less Than 10 G 8-775-894-27-63, Soft Solder (Low Melting Point) Wire With Flux/Rosin D 1.5 Mm Type Of Solder Is Soft (Low-Melting) Section/Diameter Not Less Than 1.5 Mm Wire Form With Flux/Rosin Weight Not Less Than 15 G 8-775-894-27-63, Type Of Flux For Soldering Volume/Weight (Ml/G)10 Composition Gel Composition Based On Rosin Soldering Temperature 250°C ~ 350°C Application For Copper Soldering Application For Copper Soldering Quantity, Pcs 1 8-775-894-27-63, Tool For Stripping Cables And Crimping Lugs. The Stripper Is Designed For Stripping The Outer Insulation Of Single-Core And Multi-Core Cables, Crimping Insulated And Non-Insulated Lugs, Crimping Contacts Of High-Voltage Ignition Wires. The Stripper Body Is Made Of High-Strength Tool Steel, Making It Resistant To Mechanical Stress And Has A Long Service Life. The Design Of The Stripper Includes A Wire Stripping Length Limiter And A Return Spring, Which Ensures The Return Movement Of The Handles And Simplifies The Process Of Working With The Tool. The Wire Clamp Force Regulator Allows You To Adapt The Tool To Different Types And Sizes Of Insulation And Not Damage The Wire Itself When Removing The Insulation. The Stripper Is Also Equipped With A Cutting Edge For Uniform Cutting Of Conductors. Two-Component Protective Handles With Rubber Inserts Prevent The Tool From Slipping Out Of Your Hand When Working. Purpose: Cable Cutting, Insulation Stripping Cable Type Twisted Pair, Telephone Tip Type Nv, Nvi, Nk, Nki Rubber Handle Coating 8-775-894-27-63, Characteristics Form Factor 2.5 Sata Drive Connection Interface Pc Connection Interfaceusb 3.0 Usb Powered Case Material: Metal Color Black 8-775-894-27-63, General Characteristics Form Factor No Less Than M2 Interface For Connecting The M2 Ngff Drive Pc Connection Interfaceusb 3.1 Cooling Type Passive Color Black Additionally, An Adapter To Type-C Is Included 8-775-894-27-63, Characteristics Electrical Installation Tool Set 20 In 1 Main Features Type Tool Set Purpose: Electrical Installation The Number Of Items Is Not Less Than 20 Pcs. Tools Included: Allen Keys, Hammer, Adjustable Wrench, Screwdrivers, Pliers, Precision Screwdrivers, Thin-Nose Pliers, Soldering Iron, Stripper, Tape Measure Accessories Included: Case, Knife, Indicator Screwdriver, Electrical Tape, Flashlight, Soldering Iron Packaging Case Equipment The Number Of Screwdrivers Is Not Less Than 6 Pcs. Screwdrivers Detail Screwdrivers, Screwdrivers For Precision Work Drill Type Not Included Cross-Shaped Bit Splines (Ph) Wrenches In Detail Imbus Wrenches (Hexagonal) Additionally Pliers Tool Sizes Pliers, Thin-Nose Pliers Additional Information Also Included Is Solder And A Box Of Heat Shrink. 8-775-894-27-63, Technical Specifications Memory Memory Capacity, Gb Not Less Than 64 Interface Type: At Least Usb 3.1 Gen 1 Interface Bandwidth Is Not Lower Than Up To 5 Gbit/S Functions And Features Housing Type: Minimum Retractable Usb Connector Color No Less Than White, Black Packaging No Less Than Rtl Additionally With Uv Printing Applied By Buketov Strap Hole Ergonomic Design Usb 2.0 Compatible Warranty Period (Months) Not Less Than 12 8-775-894-27-63, Thermoblock Drive Gear Hp M127/M128/M125/M126 24T/58T 8-775-894-27-63, Technical Specifications Type Screwdriver/Wrench Set Basic Parameters Equipment Bit Holder Handle 25 Precision Bits Sl1.5, Sl2.0, Sl3.0 Ph0, Ph000, Ph00 T2, T3, T4, T5h, T6h, T8h, T9h, T10h P2, P5, Y0.6, Y1 W1.5 U2.6 H1.5, H2.0, 2.3 Additionally Ergonomic Handle Aluminum Housing Magnetic Bit Case Alloy Steel S2 Housing Material: Anodized Aluminum Warranty Period (Months)12 8-775-894-27-63, Characteristics Universal Set 12 In 1 Main Features Type Tool Set Purpose Non-Universal The Number Of Items Is Not Less Than 12 Pieces Tools Included: Wrenches, Combination Wrenches Accessories Included: Case With Fasteners Equipment The Number Of Wrenches Is At Least 12 Wrenches No Less Than 6X7.8X9,10,11,12,13,14,17,19,22, 24X27, 30X32 Mm 8-775-894-27-63, Technical Specifications Micro-Atx Form Factor Socket No Lower Than Lga1200 Chipset No Lower Than Intel Z490 Support For Processor Microarchitecture No Lower Than Comet Lake, Rocket Lake Number Of Memory Slots: At Least 2 X Ddr4 Supported Memory Frequencies, Mhz No Less Than 2400, 2666, 2933 Maximum Ram Capacity 64 Gb Drive Controllers Number Of Sata Iii Connectors 4 Connectors For Ssd At Least 1 X M.2 Audio Realtek Alc897 Audio Codec Number Of Channels 8 Interfaces And Connectors Video Connectors On The Rear Panel At Least Hdmi X 1, Vga X 1 Other Connectors On The Rear Panel Ps/2 Combo, Rj-45 Lan, Line-In, Line-Out, Mic-In Number Of Usb 3.0 / 3.1 Gen 1 (3.2 Gen 1) 2 Network Network Controller No Less Than Realtek 8111H Network And Wireless Communications Gigabit Ethernet (1000 Mbps) Expansion Slots Number Of Pci Express Slots 1 X1 Slot, 1 X16 Slot Pci Express 3.0 Standard Operating Modes Of Pci Express Slots 1 X Pci-E 3.0 X16 Slot, X16 Operating Mode Ssd Connection Interface 1X Universal (Sata+Pci-E 3.0 X4) Power Connectors 8-Pin, 24-Pin Features Backlight Features Connector For Connecting Led Strips Bios At Least 128 Mb, Ami Bios, Uefi Bios Warranty Period (Months) Not Less Than 12 8-775-894-27-63, Technical Specifications Micro-Atx Form Factor Socket No Less Than Lga1700 The Chipset Is Not The Same As Intel B760 Supports Processor Microarchitecture No Lower Than Alder Lake, Raptor Lake Memory Support Number Of Memory Slots 4 X Ddr4 Supported Memory Frequencies, Mhz No Less Than 2133, 2400, 2666, 2933, 3200, 3333, 3400, 3466, 3600, 3733, 3800 Maximum Ram Capacity Of At Least 128 Gb Extreme Memory Profile (Xmp) Technology Support Drive Controllers Number Of Sata Iii Connectors At Least 4 Raid Array Of Sata Devices No Less Than 0, 1, 5, 10 Connectors For Ssd At Least 2 X M.2 Audio Realtek Alc897 Audio Codec Number Of Channels 8 Interfaces And Connectors Video Connectors On The Rear Panel At Least Displayport X 1, Hdmi X 1, Vga X 1 Other Connectors On The Rear Panel Ps/2 Keyboard, Ps/2 Mouse, Rj-45 Lan, Line-In, Line-Out, Mic-In Number Of Usb 3.0 / 3.1 Gen 1 (3.2 Gen 1) 1 Number Of Usb 3.1 Gen 2 Type-C (3.2 Gen 2 Type-C) 1 Network Realtek Rtl8111h Network Controller Network And Wireless Communications Gigabit Ethernet (1000 Mbps) Expansion Slots Number Of Pci Express Slots 2 X1 Slots, 1 X16 Slot Pci Express 4.0 Standard Operating Modes Of Pci Express Slots 1 X Pci-E 4.0 X16 Slot, X16 Operating Mode Ssd Connection Interface Sata3, 1X Pci Express 4.0 X4, 1X Universal (Sata+Pci-E 4.0 X4) Power Power Connectors 8-Pin, 24-Pin Backlight Features Connector For Connecting Led Strips Bios At Least 256 Mb, Ami Bios, Uefi Bios Additionally 4 Usb 2.0 Ports For Connecting Peripheral Devices Warranty Period (Months) Not Less Than 12 8-775-894-27-63, Hand-Held Black Lantern General Characteristics Manual Assignment Light Source Leds Luminous Flux Of At Least 1000 Lm Lighting Range Of At Least 300 M Operating Time Not Less Than 3 Hours Body Material: No Less Than Aluminum Features: Waterproof, Shockproof, Adjustable Focus, Zoom Focus, Tactical, Usb Type-C Connector, Hanging Loop The Equipment Includes At Least A Flashlight, A Battery, A Form For Batteries, A Charger For The Battery And Batteries, A Case For Convenient Storage Number Of Brightness Levels 1 Number Of Modes 2 Light-Cold Shade, Ultraviolet Body Length At Least 13 Cm Protection Standard No Less Than Ip70 Battery Included Case Color Black Power Supply: At Least Battery, Batteries Battery Type Li-Ion Number Of Batteries/Accumulators 1 8-775-894-27-63, Solder Soft (Low-Melting) Rod D 8 Mm 70 G, Solder-Soft (Low-Melting) Type Section/Diameter Not Less Than 8 Mm Bar Shape Composition Of At Least 40% Tin And 60% Lead Weight Not Less Than 70 G 8-775-894-27-63, Assembly Gun Characteristics Type Of Magazine: Rack And Pinion Magazine Capacity (Nails) At Least 1 Maximum Nail Diameter Not Less Than 55 Mm Minimum Nail Length Of At Least 15 Mm General Characteristics Power Supply Mechanical Type Of Equipment: Nails (Pins) Features Rubber Handle Additional Features Combined Body Material The Complete Set Is No Less Than A Gun For Dowels - 1 Piece; Safety Glasses - 1 Piece; Nails - 300 Pcs; Oil - 1 Piece; Cleaning Brush - 1 Piece; Additional Replacement Parts - 8 Pcs; Gloves; Earplugs With Cord 8-775-894-27-63, Professional Microphone Cable 2 X 0.22 Mm?, D=6.3Mm, Insulation – Copper Drain Wire (Ground) + Conductive Pvc, Coil, Black 100 Meters 8-775-894-27-63
|
