Tender For Estimate Quantity Item Detailed Specification Description Apss / Morth Cl. Number Rate (Inr) - Up ... in India

Work Detail

Tender for Estimate Quantity Item Detailed Specification Description Apss / Morth Cl. Number Rate (Inr) - Upto 2 Decimals Unit Amount (Inr) - Upto 2 Decimals Road Work , Earthwork Excavation In Soils Upto Sdr By Mechanical Means Including Trimming Bottom And Side Slopes In Accordance With Requirements Of Lines, Grades And Cross Sections Etc., Complete Including For Finished Item Of Work For Trench Cutting As Per Mort&H Specification 301(5Th Revision) And As Directed By The Engineer-In-Charge( Excluding Seigiorage Charges And Gst) , Construction Of Embankment With Material Obtained From Borrowed Useful Selected Earth From Outside Road Boundary With A Lead Of 7 Kms And Having Cbr10%, Pi18 & Mdd1.8 Gm/Cc, By Mechanical Means Up To Sdr With All Leads And Lifts Including Pre-Watering Of Soil At Borrow Area, Removal Of Top Soil, Excavation Of Soils At Borrowed Area, Conveyance Of Soil, Depositing The Soil On The Embankment, Spreading Soil, Breaking Clods, Sectioning, Grading And Consolidation With 8 To 10 Tonnes Vibratory Road Roller @ Omc To Meet Requirement Of Table 300-2 Of Mort&H, Including All Hire And Operational Charges Of T&P And Seigniorage Charges, Complete For Finished Item Of Work As Per Mort&H Specification 305 (Excluding Seigniorage And Gst) , Construction Of Subgrade With Approved Material Of Gravelly Soils Obtained Fromoutside Of Boundary With A Lead Of 7 Km And Having Mdd Of 18 Kn/Cum , Cbr = 12%, Pi 12%, By Mechanical Means Upto Sdr With All Leads And Lifts Including Pre-Watering Of Soil At Borrow Area, Removal Of Top Soil, Excavation Of Soils At Borrowed Area, Conveyance Of Soil, Depositing The Soil On The Embankment, Spreading Soil, Breaking Clods, Sectioning, Grading And Consolidation With 8 To 10 Tonnes Vibratory Road Roller @ Omc To Meet Requirement Of Table 300-2 Of Mort&H, Including All Hire And Operational Charges Of T&P, Complete For Finished Item Of Work As Per Mort&H Specification 305 (5Th Revision) (Excluding Seigniorage Charges And Gst) , Scarifying The Existing bituminous Surface To A Depth Of 50 Mm By Mechanical Means And Disposal Of Scarified Material With All Leads And Lifts Upto 1000 Mtrs As Per Mort&H (5Th Revision) Specn. No.305.4.3 (Excluding Gst) , Construction Of Granular Sub-Base By Providing Hbg Material Confirming To Grading - V/Vi Of Mort&H Table 400-1 Including Cost, And Conveyance Of All Materials To Work Site And Spreading In Uniform Layers With Motor Grader Or By Approved Means, On Prepared Surface Mixing By Mix In Place Method With Rotavator / Approved Means At Omc And Compacting With Vibratory Roller To Achieve The Desired Density Etc., Complete For Finished Item Of Work As Per Mort&H Specification 401 (5Th Revision) And As Directed By The Engineer-In-Charge. (Excluding Seigiorage Charges And Gst) , Providing, Laying, Spreading And Compacting Graded Hbg Crushed Stone Aggregate To Wet Mix Macadem Specification Including Cost Of All Materials And Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Paver In Base Courses On Well Prepared Surface And Compacting With Vibratory Roller To Acheive The Desired Density Etc., As Directed By The Engineer-In-Charge And As Per Mort&H Specification 406 (5Th Revision) For Finished Item Of Work. (Excluding Seigiorage Charges And Gst) , Providing And Aplying Prime Coat With Bitumen Emulsion (Slow Setting Ss1) Bulk Using Emulsion Pressure Distributor On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Emulsion At The Rate Of 0.70 Kg/Sqm Using Emulsion Pressure Distributor For Finished Item Of Work As Per Mort&H Specification 502 (5Th Revision) And As Directed By The Engineer - In Charge(.Excluding Gst) , Providing And Applying Tack Coat With Bitumenemulsion (Rapid Settting-I) (Bulk) Using Emulsion Pressure Distributor At The Rate Of 0.20 Kgs Per Sqm On The Prepared Bituminous/Granular Surface Cleaned With Mechanical Broom For Finished Item Of Work As Per Mort&H Specification 503 (5Th Revision) And As Directed By The Engineer-In-Charge.(Excluding Gst) , Providing And Laying Of Dense Graded Bituminous Macadam With 100-120 Tph Batch Type Hot Mix Plant/40-60Tph Hot Mix Plant Using Hbg Crushed Aggregates Of Grading - Ii As Per Table 500-10 Of Mort&H Specification 505 (5Th Revision) Premixed With Bitumen Vg-30 Grade @ 4.50% Of Weight Of Total Mixture, Transported To Site, Laid Over A Previously Prepared Surface With Hydrostatic Sensor Paver To The Required Grade, Level And Alignment And Rolled As Per Clauses 501.6 And 501.7 To Achieve The Desired Compaction For Finished Item Of Work As Directed By The Engineer-In-Charge Including Hire And Operational Charges All T&P And All Other Contingent Charges Necessary Including Charges Of All Materials Etc., Complete And As Per Morth Specification No. 505(5Th Revision) (Excluding Seigniorage Charges And Gst ) , Providing 30 Mm Thick Compacted Bituminous Concrete With 100-120 Tph Batch Mix Plant Using Hbg Crushed Aggregates Of Grading - 2 As Per Table 500-17 Of Specification 507 Of Mort&H (5Th Revision), Premixed With Bitumen Vg-30 Grade @ 5.4% Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With Mechanical Paver Finisher To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Mort&H Specification 507 (5Th Revision) Complete For Finished Item Of Work In All Respects As Directed By Engineer-In-Charge (Excluding Seigniorage Charges And Gst ) , Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Mechanical Paver Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing And As Directed By Engineer-In-Charge (Excluding Seigionarage Charges And Gst) , Construction Of Pqc Road With Pannel Of Size (1Mx1m) Over A Prepared Sub Base With 43 Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Primer, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing Including Joint Cutting, Texuring Etc., Complete And As Directed By Engineer-In-Charge (Excluding Seigionarage Charges And Gst) , Construction Of Shoulders With Approved Material Of Gravelly Soils Obtained Fromoutside Of Boundary With A Lead Of 7 Km And Having Mdd Of 18 Kn/Cum , Cbr = 12%, Pi 12%, By Mechanical Means Upto Sdr With All Leads And Lifts Including Pre-Watering Of Soil At Borrow Area, Removal Of Top Soil, Excavation Of Soils At Borrowed Area, Conveyance Of Soil, Depositing The Soil On The Embankment, Spreading Soil, Breaking Clods, Sectioning, Grading And Consolidation With 8 To 10 Tonnes Vibratory Road Roller @ Omc To Meet Requirement Of Table 300-2 Of Mort&H, Including All Hire And Operational Charges Of T&P, Complete For Finished Item Of Work As Per Mort&H Specification 305 (5Th Revision) (Excluding Seigniorage Charges And Gst) , Conducting Survey Using Network Survey Vehicle (Nsv):Survey Vehicle Should Be Capable Of Collecting The Following Parameters:(I) Inventory Data (Terrain Data Like Road Name, Link Name, Lane Details, Carriageway Width, Pavement Type, Median Type, And Width, Shoulder Type And Width, Drain Type And Width, Cd Structures, Junctions, Signs, Road Furniture, Etc.)(Ii) Pavement Distresses (Cracking, Ravelling, Potholes, Ruts, Bleeding, Etc.)(Iii) Roughness (Iri) Of Pavement Surface.(Iv) Geometry Data (Horizontal And Vertical Alignment).(V) Pavement Surface Deflection Using Bump Integrator/Laser Profilometer.The System Shall Be Equipped With The Following Minimum Equipment.(A) Laser Crack Measurement System (Lcms) - For Automatic Crack Detection (Longitudinal, Transverse, Alligator Cracks, Ravelling, Potholes, Etc.)(B) Inertial Profiler - For Measurement Of Road Roughness.(C) Laser Rut Measurement System - For Measurement Of Rut Depth.(D) Gps Receiver - For Accurate Geo-Referencing Of Data.(E) Distance Measuring Instrument (Dmi) - For Measuring Distance.(F) High-Resolution Cameras - For Video Logging.(G) Inertial Measurement Unit (Imu) - For Measurement Of Cross Slope And Gradient.(H) Onboard Computer And Software - For Data Collection, Processing, And Reporting.The Vehicle Should Have A Minimum Speed Of 30 To 100 Kmph And Should Be Capable Of Collecting All Data In One Pass With A Distance Accuracy Of 0.1 M Or Better.The Roughness Data Shall Be Measured In Accordance With Astm E950 Class 1 Standard And Should Have Laser Sensors Capable Of At Least 32 Khz Sampling Rate With 10000 Pulses Per Revolution And Resolution Of 0.1 Mm.The Data Should Be Processed To Calculate The International Roughness Index (Iri) Values In Both Wheel Paths For Each Lane.The Survey Data Should Be Provided In Gis-Based Format (Mdb/Csv/Shape File) Along With Corresponding Video Logs.Each Defect And Feature Should Be Geo-Tagged With Coordinates And Chainage.Raw Data, Processed Data, And Analyzed Reports Should Be Supplied In Softcopy And Hardcopy Formats, Including All Inventory, Condition, And Geometry Data.The System Should Be Capable Of Performing The Survey Under Traffic Flow Without Lane Closure.Raw Data Should Be Stored In Suitable Long-Lasting Storage Medium For Cross-Checking At Any Time (Excluding Gst) Pipe Culvert , Dismantling Of Existing Structures Like Culverts , Bridges, Retaining Walls And Other Structures Comprising Of Masonry, Cement, Concrete, Wood Work , Steel Work, Including T&P And Scaffolding Wherever Necessary Sorting The Dismantled Material, Disposal Of Unserviceable Materials And Stacking The Materials With All Lifts And Lead Of 1000 M ( In Rubble Masonry In Cement Mortar) (Excluding Gst) , Earthwork Excavation In Soils Upto Sdr By Mechanical Means For Foundations Of Structures As Per Drawing And Technical Specification Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Matter, Dressing Sides Of Bottom, Back Filling The Excavation Earth To The Extent Required Etc., Complete For Finished Item Of Work As Per Mort&H Specification 304(5Th Revision) And As Directed By The Engineer-In-Charge.(Excluding Seigiorage Charges And Gst). , Providing Plain Cement Concrete (1:3:6) Mix Using 40Mm Size Hbg Crushed Stone Aggregate Conforming To Table 1000-1 And Fine Aggregate Conforming To Table 1000-2 Of Mort&H Including Cost, Conveyance Of All Materials To Site And Labour Charges, Centering, Machine Mixing, Laying, Vibrating, Curing Etc., Including All Other Incidental And Operational Charges Of All T&P Etc., Complete For Finished Item Of Work As Per Mort&H Specification 1500,1700, 2100 (5Th Revision) And As Directed By The Engineer-In-Charge For Levelling Course (Excluding Gst And Seignorage Charges) , Providing, Laying Reinforced Cement Concrete Hume Pipes Of 1000 Mm Dia., Np-4 Class For Pipe Culverts Including Cost And Conveyance Of Pipes Etc., Complete And Labour Charges For Laying, Jointing Of 1000Mm Dia. Reinforced Cement Concrete Hume Pipes In Position Including Lifting, Aligning, Lowering And Hoisting Etc., As Per Drawing And As Per Mort&H Specification 2900, 2905 And 2906 (5Th Revision) And Irc Special Publication No: 13 And As Directed By The Engineer-In-Charge For Finished Item Of Work. (Excluding Gst) , Providing, Laying Reinforced Cement Concrete Hume Pipes Of 600Mm Dia., Np-3 Class For Pipe Culverts Including Cost And Conveyance Of Pipes Etc., Complete And Labour Charges For Laying, Jointing Of 600Mm Dia. Reinforced Cement Concrete Hume Pipes In Position Including Lifting, Aligning, Lowering And Hoisting Etc., As Per Drawing And As Per Mort&H Specification 2900, 2905 And 2906 (5Th Revision) And Irc Special Publication No: 13 And As Directed By The Engineer-In-Charge For Finished Item Of Work (Excluding Gst). , Vibrated Cement Concrete M 15 Grade Concrete Using 40Mm , 20Mm And 10Mm Size Hbg Crushed Stone Aggregate (Coarse Aggregate Conforming To Table 1000-1 And Fine Aggregate Conforming To Table 1000-2) Including Cost, Seigniorage And Conveyance Of All Materials To Site And All Labour Charges , Centering, Machine Mixing, Laying In Position, Compacting, Vibrating And Curing Including All Other Incidental And All Other Operational Charges Of T&P Required Etc., Complete As Per Mort&H Specification 1500,1700, 2200 (5Th Revision) (Excluding Gst And Seignorage Charges) For Body Walls , Back Filling Behind Abutments With Gravel Including Cost ,Conveyance And Of All Materials To Site Etc., Complete As Per Clause 710.1.4 Of Irc : 78 And As Per Mort&H Specification No. 2200 (5Th Revision) And As Per Drawing And Technical Specifications For Finished Item Of Work (Excluding Seigiorage Charges And Gst) Road Safety Interventions , Supplying Of Hot Applied Thermoplastic Road Marking Compound, 2.5Mm Thick Including Reflectorising Glass Beads @ 250Gms With Reflectorising Glass Beads On Bituminous Surface At 250 Gms Per Sqm Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass Bead As Per Morth Section 803.4 And Irc: 35-2015, The Material Should Satisfy The Requirements As Per Morth Specifications 803.4 And Must Comply With The Following: A) White Index For The Product Should Be In The Range Of 60-70 When Measured Against Standard Reference. The Applied Panel 7/8 Number Must Be Submitted For Checking Up The White Index In The Department Lab. In Case The Department Approves The White Index Of Any Vendor, The Department Engineer May Carryout Random Checking Of The Applied Products At Site Against The Approved Panel. In Case Of Any Major Deviation, Beyond Acceptance Limit, Department Reserve The Right To Cancel Or Reject The Total Supplied Consignment Of The Said Material And Will Compell The Vendor Has To Replace The Full Consignment By The Desired Material As Per Approved Panel At His Own Cost And Additional Demurrages May Be Claimed Due To Loss Of Man Days (As Per The Rules Of The Department). B) Luminance Factor Of The Material Should Be In The Range Of 80-85% At 45 Degree Centigrade As Per Aasthom 249. C) Crack Resistance: The Applied Panel Cured For 7 Days Under Ambient Condition And Then Should Be Tested As Per Bs3262, Part-1, 1989 And Should Pass At The Range Of 0 Degree Centigrade To -10 Degree Centigrade D) Adhesion : Strong E) Softening Point: 102 Degree Centigrade F) Dried Film Finish : Smooth And Uniform G) Night Vision: High As Directed By The Engineer-In-Charge And Confirming To Is: 164-1961 (1St Revision Reaffirmed In 1986) And Clause Conforming To Irc 35-2015 And Morth Section 803.4 (Excluding Gst) , Supplying & Fixing Of Molded Shanks Raised Pavement Markers Made Of Plastic Body Moulded From Hips(Hi-Impact Polysterene) Or Abs Or Asa ( Acrylic Strene Acrylonitrite And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw/Nh/33023/10-97 - Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 100 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 +/- 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 +/- 2 Mm And Height Not Less Than 30+/- 2 Mm) From The Body Is To Be A Minimum Value Of 700 Kgs. Fixing Will Be By Drilling Holes On The Road For The Twin Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per ManufacturerS Recommendation And Complete As Directed By The Engineer.(Excluding Gst) , Providing And Fixing Junction Boards Of Size 1500 X1200mm Made Of Of Type - Xi Of Astmd 4956-09 Wide Angle Cube Cornered Micro Prismatic Retro Reflective Sheeting And Confirming To Irc 67:2012 For Full Background Of White Colour And Letters/Logos Done By Screen Printing In Black Colour, Boarders By Screen Printing In Red Colour And Fixed Over 3Mm Alluminium Composite Material Sheet Having Minimum 0.30Mm Thick Aluminium Skin On Both Sides With Back Side Painted Grey Colour And Fixed Over Back Support Frame Of M.S Angle 25X25x3mm All Round And Fixing With 35X35x4mm And Mounted On A Ms Angle Post Of Size 75X75x6mm With Clear Height Of Not Less Than 2.1 M From The Ground Level To The Bottom Of The Board. The Signpost Should Be Painted With One Coat Of Red Oxide Paint And 2 Coats Of Synthetic Enamel Paint Black And White Colour With Bands Of 30Cm Of Height. The Signpost Shall Be Firmly Fixed With Ms Base Angle 35X35x4 Mm In To The Ground By M-15 Concrete Foundation Of Size 450X450x600mm Including Cost And Conveyance Of All Materials ,Equipment, Machinery And Labour With All Leads And Lift, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By Engineer -In-Charge. (Excluding Gst) For Display Boards At The Start And End Point Of The Reach. , Providing And Fixing Cautionary / Warning Sign Boards Size 900 Mm Equilateral Triangle Made Out Of Type - Xi Of Astmd 4956-09 Wide Angle Cube Cornered Micro Prismatic Retro Reflective Sheeting And Confirming To Irc 67:2012 For Full Background Of White Colour And Letters/Logos Done By Screen Printing In Black Colour, Boarders By Screen Printing In Red Colour And Fixed Over 4Mm Aluminium Composite Material Sheet Having Minimum 0.5 Mm Thick Aluminium Skin On Both Sides With Back Side Painted Grey Colour And Fixed Over Back Support Frame Of M.S Angle 25X25x3mm All Round And Fixing With 35X35x4mm And Mounted On A Ms Angle Post Of Size 75X75x6mm With Clear Height Of Not Less Than 2.1 M From The Ground Level To The Bottom Of The Board. The Signpost Should Be Painted With One Coat Of Red Oxide Paint And 2 Coats Of Synthetic Enamel Paint Black And White Colour With Bands Of 30Cm Of Height. The Signpost Shall Be Firmly Fixed With Ms Base Angle 35X35x4 Mm In To The Ground By M-15 Concrete Foundation Of Size 450X450x600mm Including Cost And Conveyance Of All Materials ,Equipment, Machinery And Labour With All Leads And Lift, Loading Chages Necessary For Satisfactory Completion Of The Work As Directed By Engineer -In-Charge. , Providing And Fixing Village Name Board Size 600X800 Mm Made Out Of Type - Iv Of Astmd 4956-09 High Intensity Prismatic Retro Reflective Sheeting And Confirming To Irc 67:2012 For Full Background Of Green Colour & White Letters And Fixed Over 4Mm Aluminium Composite Material Sheet Having Minimum 0.4 Mm Thick Aluminium Skin On Both Sides With Back Side Painted Grey Colour And Fixed Over Back Support Frame Of M.S Angle 25X25x3mm All Round And Fixing With 35X35x4mm And Mounted On A Ms Angle Post Of Size 75X75x6mm With Clear Height Of Not Less Than 2.1 M From The Ground Level The Bottom Of The Board. The Signpost Should Be Painted With One Coat Of Red Oxide Paint And 2 Coats Of Synthetic Enamel Paint Black And White Colour With Bands Of 30Cm Of Height. The Signpost Shall Be Firmly Fixed With Ms Base Angle 35X35x4 Mm In To The Ground By M-15 Concrete Foundation Of Size 450X450x600mm Including Cost And Conveyance Of All Materials ,Equipment, Machinery And Labour With All Leads And Lift, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By Engineer -In-Charge (Excluding Gst) , Providing And Fixing Junction Boards Of Size 1500 X1200mm Made Of Of Type - Xi Of Astmd 4956-09 Wide Angle Cube Cornered Micro Prismatic Retro Reflective Sheeting And Confirming To Irc 67:2012 For Full Background Of White Colour And Letters/Logos Done By Screen Printing In Black Colour, Boarders By Screen Printing In Red Colour And Fixed Over 3Mm Alluminium Composite Material Sheet Having Minimum 0.30Mm Thick Aluminium Skin On Both Sides With Back Side Painted Grey Colour And Fixed Over Back Support Frame Of M.S Angle 25X25x3mm All Round And Fixing With 35X35x4mm And Mounted On A Ms Angle Post Of Size 75X75x6mm With Clear Height Of Not Less Than 2.1 M From The Ground Level To The Bottom Of The Board. The Signpost Should Be Painted With One Coat Of Red Oxide Paint And 2 Coats Of Synthetic Enamel Paint Black And White Colour With Bands Of 30Cm Of Height. The Signpost Shall Be Firmly Fixed With Ms Base Angle 35X35x4 Mm In To The Ground By M-15 Concrete Foundation Of Size 450X450x600mm Including Cost And Conveyance Of All Materials ,Equipment, Machinery And Labour With All Leads And Lift, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By Engineer -In-Charge. (Excluding Gst) Retaining Wall , Earthwork Excavation In Soils Up To Sdr By Mechanical Means For Foundations Of Structures As Per Drawing And Technical Specification Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Matter, Dressing Sides Of Bottom, Back Filling The Excavation Earth To The Extent Required Etc., Complete Including Seigniorage Charges For Finished Item Of Work As Per Mort&H Specification 304(5Th Revision) And As Directed By The Engineer-In-Charge (Excluding Gst And Seignorage Charges) , Providing Plain Cement Concrete (1:3:6) Mix Using 40Mm Size Hbg Crushed Stone Aggregate Conforming To Table 1000-1 And Fine Aggregate Conforming To Table 1000-2 Of Mort&H Including Cost, Conveyance Of All Materials To Site And Labour Charges, Centering, Machine Mixing, Laying, Vibrating, Curing Etc., Including All Other Incidental And Operational Charges Of All T&P Etc., Complete For Finished Item Of Work As Per Mort&H Specification 1500,1700, 2100 (5Th Revision) And As Directed By The Engineer-In-Charge For Foundation (Excluding Gst And Seignorage Charges) For Levelling Course Of Retaining Wall , Vibrated Cement Concrete M 15 Grade Concrete Using 40Mm , 20Mm And 10Mm Size Hbg Crushed Stone Aggregate (Coarse Aggregate Conforming To Table 1000-1 And Fine Aggregate Conforming To Table 1000-2) Including Cost, Seigniorage And Conveyance Of All Materials To Site And All Labour Charges , Centering, Machine Mixing, Laying In Position, Compacting, Vibrating And Curing Including All Other Incidental And All Other Operational Charges Of T&P Required Etc., Complete As Per Mort&H Specification 1500,1700, 2200 (5Th Revision) For Body Walls

Contact Information