|
Luminary Arm Lm-1 Br-1 Standard Copel, Wedge Connector Type A Ip 02 2/0X2 Mm Type C, 10-95 Piercing Connector (10 Mm -95 Mm). Designed For Bypass Connections By Piercing The Insulation In Low Voltage Networks And Aerial Branches, For Insulated Aluminum And/Or Copper Conductors, 110 Watt Led Recessed Recessed Luminaire 110 Watt Led Retractable Recessed Luminaire Set, The Set Must Be Manufactured In Injected Or Extruded Aluminum. The Set Must Consist Of A Retractable Fixing Support With Double Movement Axis, Horizontal And Vertical. The Support Base Must Have A Maximum Height Of 400Mm. This Mechanism Must Perform Vertical Movement With A Minimum Of 90º Degrees, And Horizontal Movement With A Minimum Of 140º Degrees Of Opening. It Must Have Vertical Angle Adjustment Of At Least 15° Degrees. The Articulated Mechanism Must Be Capable Of Automatically Returning To The Standard Installation Position If It Suffers Horizontal Movement. Hermetic Sealing Of The Retractable Mechanism Against Ingress Of Dust And Water Is Required. Installation Must Be Carried Out At A Minimum Height Of 4.50 Meters. The Set Must Include 2 (Two) Bap No. 3 Fixing Straps, With Supports, Screws And Nuts, Which Must Be Made Of Steel With Hot-Dip Galvanization Treatment. The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface On Which The Led Board(S) Will Be Installed. Fins, Fitted, Screwed, Glued Or Welded Will Not Be Accepted. This Lens(Es) Must Be Fixed With Weather-Resistant Screws, Fitted Lenses, Quick-Close Lenses, Or Clips Will Not Be Accepted As These May Lose Pressure And Warp Over Time And Use. The Sealing Of The Vital Parts Of The Luminaires (Optical Assembly And Housing Of Electronic Components) Must Be Protected Against Ingress Of Solid Particles, Dust And Moisture, Certified By At Least Ip66; And, It Has Protection Against Mechanical Impacts, Certified By At Least Ik08. The Sealing System Of The Luminaires Must Be Made Up Of Gasket(S), Resistant To High Temperatures. This Gasket(S) Must Be Fixed By Mechanical Pressure Between The..., Retractable Led Recessed Luminaire With Power Of Up To 55 Watts 55 Watt Retractable Recessed Recessed Led Luminaire Set, High Temperature Resistant. This Gasket(S) Must Be Fixed By Pressure Me..., Set Of Ornamental Pole And Led Luminaire For Public Lighting With Power Of 120 Watt And Height Of 4,900Mm. Ornamental Set Must Be Composed Of A Post And Circular Led Ornamental L Total Height Of The Assembly Must Be From 4,800 Mm To 5,000 Mm. It Is Required To Have A Hollow, Conical Cylindrical Ornamental Base, Made Of Concrete, With A Smooth External Finish, With A Wall Of At Least 30Mm Thick And 550Mm High. The Fastening System Must Be Made By Flanging, Incorporated Through Threaded Drawn Steel Anchors, With Screws, Nuts And Washers Mandatory Protected Against Oxidation And Vandalism. The First Section Of The Pole (Lower Section) Must Be Made Of Metal Tube
|
