Bids Are invited for Establishing Opd In The Second And Third Floor Of The Existing Building At Nimhans Nort ... in India

Work Detail

Bids Are invited for Establishing Opd In The Second And Third Floor Of The Existing Building At Nimhans Northern C Us - Supplying And Fixing Metal Box Of Following Sizes (Nominal Size) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Painting Etc. As Required. , 75 Mm X 75 Mm X 60 Mm Deep , 150 Mm X 75 Mm X 60 Mm Deep , 200 Mm X 125 Mm X 60 Mm Deep , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , 5/6 A Switch , 2 Way 5/6 A Switch , 15/16 A Switch , 3 Pin 5/6 A Socket Outlet , 6 Pin 15/16 A Socket Outlet , Telephone Socket Outlet , Tv Antenna Socket Outlet , Bell Push , Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. Asrequired. , 1 Or 2 Module (75Mmx75mm) , 3 Module (100Mmx75mm) , 4 Module (125Mmx75mm) , 6 Module (200Mmx75mm) , 8 Module (125Mmx125mm) , 12 Module (200Mmx150mm) , Supplying And Fixing Following Modular Base & Cover Plate Onexisting Modular Metal Boxes Etc. As Required. , 1 Or 2 Module , 3 Module , 4 Module , 6 Module , 8 Module , 12 Module , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5/6 A Modular Socket Outlet And 5/6 A Modularswitch, Connections Etc. As Required. , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required. , Installation, Testing And Commissioning Of Pre-Wired, Fluorescent Fitting / Compact Fluorescent/Led Fitting Of All Types, Complete With All Accessories And Tube/L Etc. Directly On Ceiling/ Wall, Including Connections With 1.5 Sq. Mm Frls/Hffr Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls/Hffr Pvc Insulated, Copper Conductor, Single Corecable Etc. As Required. , Supplying And Fixing Extra Conduit Down Rod Of 20 Cm Length G.I. Pipe 15 Mm Dia, Heavy Gauge Including Painting Etc. As Required. (Note : More Than 5 Cm Length Shall Be Rounded To The Nearest 10 Cm And 5 Cm Or Less Shall Be Ignored) , Numbering Of Ceiling Fan/ Exhaust Fan/ Fluorescent Fittings Asrequired. , Installation Of Exhaust Fan In The Existing Opening, Includingmaking Good The Damage, Connection, Testing, Commissioning Etc. As Required. , Upto 450 Mm Sweep , Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point ( Without Independent Switch Etc.) With 1.5 Sq. Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Group B , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providng And Fixing 2 Nos. 3 Pin 5/6 A Modular Socket Outlet And 2 Nos. 5/6 A Modular Switch, Connections Etc. As Required. (For Light Plugs To Be Used In Non Residential Buildings). , Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) , 8 Way, Double Door , 12 Way, Double Door , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Withoutmcb/Rccb/Isolator) , 4 Way (4 + 12), Double Door , 6 Way (4 + 18), Double Door , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.) , 4 Way (4 + 12), Double Door , 8 Way (4 + 24), Double Door , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Single Pole , Single Pole And Neutral , Double Pole , Trible Pole , Trible Pole And Neutral , Supplying And Fixing Single Pole Blanking Plate In The Existing Mcbdb Complete Etc. As Required. , Supplying And Fixing Following Rating, Double Pole, 240 V, Isolator In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required. , 40 A , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required. , 40 A , 63 A , Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. Asrequired. , 25 A , 40 A , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , 40 A , 63 A , Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25/32 A 240 V C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing Tp Sheet Steel Enclosure On Surface/ Recess Along With 16/25/32 A 415 V C Curve Tp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Sp, Mcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. Asrequired. , Supplying And Fixing 20 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. Asrequired. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 30 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. Asrequired. , Providing And Fixing M.V. Danger Notice Plate Of 200 Mm X 150 Mm, Made Of Mild Steel, At Least 2 Mm Thick, And Vitreous Enameled White On Both Sides, And With Inscription In Single Redcolour On Front Side As Required. , Supplying And Fixing Cable End Box (Loose Wire Box) Suitable For Following Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Testing And Commissioning Etc. As Required. , For 8 Way, Double Door Spn Mcbdb , Supplying And Fixing Cable End Box (Loose Wire Box) Suitable For Following Triple Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 Volts, On Surface/ Recess, Complete With Testing And Commissioning Etc.As Required. , For 4 Way, Double Door Tpn Mcbdb , For 6 Way, Double Door Tpn Mcbdb , Hot Dipped Galvanized Iron Cable Tray 4.6 Supplying And Installing Following Size Of Perforated Hot Dipped Galvanised Iron Cable Tray (Galvanisation Thickness Not Less Than 50 Microns) With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Two Numbers Gi Suspenders I/C Base Of Suitable Size Gi Angle, Gi Bolts & Nuts, Fastner Etc As Required. , 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 450 Mm Width X 50 Mm Depth X 2 Mm Thickness , Supplying And Installing Following Size Of Perforated Hot Dipped Galvanised Iron Cable Tray Bends (Galvanisation Not Less Than 50 Microns) With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Two Numbers Gi Suspenders I/C Base Of Suitable Size Gi Angle, Gi Bolts & Nuts, Fastner Etc As Required. , 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 450 Mm Width X 50 Mm Depth X 2 Mm Thickness , Supplying And Installing Following Size Of Perforated Hot Dipped Galvanised Iron Cable Tray Tee (Galvanisation Not Less Than 30 Delhi Schedule Of Rate 2025 50 Microns) With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Two Numbers Gi Suspenders I/C Base Of Suitable Size Gi Angle, Gi Bolts & Nuts, Fastner Etc As Required. , 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , 450 Mm Width X 50 Mm Depth X 2 Mm Thickness , Led Down Lighter (Smd Type) (System Lumen Efficacy >135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Led Recessed/Surface Down Lighter (Round /Square/Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Freq 50/60 Hz, Operating Temp Range - 5 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.=0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitary), Life Time Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K / 6500°K (As Per Ansi Bin) ,Sdcm(Standard Deviation Color Matching) 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). Powder Coated Die Cast /Extruded Aluminium Body Including Trim . , 12 -15 Watt , 18 Watt , Led Panel Light 2X2 Ft., (System Lumen Efficacy >135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft., Of Following Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency>85%, Operating Voltage Ac 140-270 Volt, Freq 50/60 Hz, Operating Temp Range -5 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection,Thd < 10% , P. F.=0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitary), Of Minimum 50000 Burning Hours With , 70% Of Initial Lumen Maintained Till Life Ends ,Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). Powder Coated Die Cast /Extruded Aluminium Body (Thickness > 1.20 Mm) Powder Coated Crca Sheet Body (Thickness > 0.50 Mm) , 36 Watt , 40 Watt , Led Batten Light (System Lumen Efficacy >135 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is: 10322 With Driver (Replaceable) As Per The Requirement With Driver Efficiency >85% ,Operating Voltage Ac 140-270 Volt, Freq 50/60 Hz, Operating Temp Range -5 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.=0.95, Ip20, Cri >80 ,Flicker Free (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitary), Of Minimum 50000 Burning Hours With , 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K / 4000°K / 5700°K/6500°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 135 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). Powder Coated Die Cast /Extruded Aluminium Body (Thickness > 1.20 Mm) , 24 -26Watt , 36 Watt , Bldc Fan Total Quantity : 1

Contact Information