|
Tender For Provn Of Store Near Bldg No Fet-26 At A Offrs Mess At Age B/R-Ii Under Ge Saugor- Excavating Soft / Loose Soil In Trenches, Not Exceeding 1.5 M Wide And Not Exceeding 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. Not Exceeding 10 Sqm On Plan And Not Exceeding 1.5 M In Depth And Getting Out Complete All As Specified And As Directed. Excavating Soft / Loose Soil In Over Areas, Not Exceeding 1.5 M In Depth And Getting Out Complete All As Specified And As Directed. M&L For Pcc 1:2:4, Type B2 (Using 40 Mm Graded Stone Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. M&L For Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Confirming To Fe-290 ( Gde E-165) Complete All As Specified And Directed S&F Ms Plates (Plain Or Chequered) Channels Square Cut To Or Notched (Ordinary And Counter Sunk) Forming Holes With Riveted Bolted Or Without Any Attachment Confirming To Fe-290 ( Gde E-165) Complete All As Specified And Directed S&F Mild Steel Screw Bolts (Machine Made) With Hexagonal / Square Heads At One End & Screwed The Other/ Screwed Both Ends, Each Screwed End To Be Fitted With Washers & One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long, Dia Of Shank 16 To 20 Mm Complete All As Specified And Directed. S&F Gi Based Pre-Painted Galvalume Sheet, 0.50 Mm Thick Coloured Having Aluminum Zinc Coating 150 Gsm/ Sqm And Tensile Strength 550 Mpa, Double Ribbed Trapezoidal Profile Steel Sheet As In Roof Covering /Cladding To Wall, Fixed With Self Tapping Screws Complete, Complete All As Specified And Directed. Sl. No. Item Description 1 Excavating Soft / Loose Soil In Trenches, Not Exceeding 1.5 M Wide And Not Exceeding 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. Not Exceeding 10 Sqm On Plan And Not Exceeding 1.5 M In Depth And Getting Out Complete All As Specified And As Directed. 2 Excavating Soft / Loose Soil In Over Areas, Not Exceeding 1.5 M In Depth And Getting Out Complete All As Specified And As Directed. 3 M&L For Pcc 1:2:4, Type B2 (Using 40 Mm Graded Stone Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. 4 M&L For Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Confirming To Fe-290 ( Gde E-165) Complete All As Specified And Directed 5 S&F Ms Plates (Plain Or Chequered) Channels Square Cut To Or Notched (Ordinary And Counter Sunk) Forming Holes With Riveted Bolted Or Without Any Attachment Confirming To Fe-290 ( Gde E-165) Complete All As Specified And Directed 6 S&F Mild Steel Screw Bolts (Machine Made) With Hexagonal / Square Heads At One End & Screwed The Other/ Screwed Both Ends, Each Screwed End To Be Fitted With Washers & One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long, Dia Of Shank 16 To 20 Mm Complete All As Specified And Directed. 7 S&F Gi Based Pre-Painted Galvalume Sheet, 0.50 Mm Thick Coloured Having Aluminum Zinc Coating 150 Gsm/ Sqm And Tensile Strength 550 Mpa, Double Ribbed Trapezoidal Profile Steel Sheet As In Roof Covering /Cladding To Wall, Fixed With Self Tapping Screws Complete, Complete All As Specified And Directed. 8 M&L For Two Coats Of Synthetic Enameled Paint Over A Coat Of Red Oxide Including Preparation Of New Steel Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And Directed. 9 M&L Rendering For 15Mm Thick On Other Than Fair Face Of Brick Masonry Work In Cm 1:4 Mixed With Liquid Wpc @ 200Ml Per 50Kg Cement Weight Complete All As Specified And Directed.Note : Wpc Shall Be Measured And Paid Seperatly Under Respective Item Of Boq. 10 S&F For Mild Steel Tmt Bars 6Mm To 8 Mm Dia Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends & Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mmdia Or Securing With Clips Quality Complete All As Specified And Directed. 11 M&L For Reinforced Cement Concrete (Nominal Mix) 1:2:4, Type B-1 ( 20 Mm Graded Stone Aggregate ) As In Beams , Cantilevers, Bressummers Etc. Complete All As Specified And Directed 12 All As Per Item No. 6 Above But Length Of Bolt Exc 15Cm But N Exc 22.5Cm Long And Dia Of Shank 16 To 20 Mmnote : The Botls And Plates Shall Be Grouted In Rcc/Pcc As Anchor Nut/Bolts.Rcc/Pcc Shall Be Measured And Paid Seperatly. 13 M&L For Brickwork With Old Size Sub Class B Bricks, Straright Or Curved On Plan Exc 6M Mean Radius, Built In Cement Mortar 1:6 Complete All As Specified And Directed. 14 M&L For Moorum/Red Bajri Filling In Floors Or Pavings Laid In Layers N.Exc 15Cm Thick Spread Levelled And Rammed Including Watering Complete All As Specified And Directed. 15 M&L For Machine Cut Kota Stone Slab 18Mm To 20 Mm Thick, As In Flooring (Size Not Less Than 550X550Mm), Laid Over And Including 20Mm Thick Cement Screed, Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Grinding, Rubbing And Mirror Polishing Complete All As Specified And Directed. 16 M&L For 100Mm Thick Pcc 1:4:8, Type D- 2 (Using 40Mm Graded Aggregate) As In Sub Base/ Mass Concrete Complete All As Specified And As Directed. 17 M&L For 60Mm Thick Factory Made Chamfered Edge Cement Concrete Colour Paver Block Of M-35 Grade, As In Foothpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Chemically Treated, Laid In Aproved Colour, Design/ Pattern, Size And Shape Over And Including 50Mm Thick Uniformly Levelled Surface Of Stone Dust Cushioning, Filling The Joints With Sand, Finishing And Sweeping Extra Sand Complete Including Dismantling Of Old Unserviceable Existing Provision Complete All As Specified And Directed.Make : Mehtab Tiles Indore(Mehtab)/ Nitco(Nitco)/ Sagar Tiles Shaanpur (Sagar) 18 M&L For Pcc (1:2:4) Type B1 (Using 20 Mm Graded Stone Aggregate) As Sub Bass / Levelling Course ( Average Thickness NExc 50Mm) Complete All As Specified And Directed. 19 S&F Mild Steel Door Shutter With Ms Angle Iron Shutters Frame 35 Mm X 35 Mm X 5 Mm In Two Panel Covered With 1.25 Mm Thick Ms Plain Black Sheet Welded To Shutter With 2 Nos Sliding Door Bolt Of 16 Mm Dia 300 Mm Long With Locking Arrangement, 2 Nos Of Tower Bolt Of 200 Mm Long Including Ms Angle Iron Frame / Chowkhat Made Of Anfle Iron Of Size 40Mm X40Mmx 5Mm With 6 Nos Flat Iron (30Mm X5 Mm) Hold Fast, 200 Mm Long, Flat Iron Of Size 30Mmx5Mm At Bottom As Anchor Tie And 100 Mm Long 4 X Butt Hinges Including Necessary Cutting, Welding, Binding As Required, Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Including Preparation Of New Steel Surfaces Complete All As Specified And Directed By Engineer-In-Charge.Note : The Size Of Door Shall Not Be Wide More Than 1.2M And Height Not More Than 2.10M 20 M&L For 75Mm Thick Cement Concrete Type C2 1:3:6 Using 40Mm Graded Stone Aggregate As In Plinth Protection Etc Making Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed . 21 Removing Excavated Material (Soils) To A Distance Exc 50M But Not Exc 250Mtr And Deposited Where Directed At A Level N.Exc. 1.5M Above The Starting Point Complete All As Specified And Directed. Please Enable Macros To View Boq Information
|
