|
1 - Pneumatic Impact Wrench With 1/2 Inch Socket, High Strength Forged Steel Body With Non-Slip Coating, Minimum Maximum Torque Of 678 Nm (Six Hundred And Seventy-Eight Newton Meter), Minimum Reversal Torque Of 407 Nm (Four Hundred And Seven Newton Meter), Twin Hammer Type Impact Mechanism Or Higher, Minimum Speed In 7,000 Rpm (Seven Thousand Revolutions Per Minute) Empty, Minimum Air Consumption Of 4 Cfm (Four Cubic Feet Per Minute), Working Pressure Between 90 Psi (Ninety Pounds Per Square Inch) And 120 Psi (One Hundred And Twenty Pounds Per Square Inch), Air Inlet 1/4 Inch Npt, Speed Selector Set To Minimum 3 Torque Adjustment Positions, Maximum Weight Of 2 Kg (Two Kilograms), Mandatory Inmetro Certification, New Product, With A Minimum Warranty Of 12 (Twelve) Months. Minimum Quality Standard Reference Brands: Snap-On, Ingersoll Rand Or Chicago Pneumatic, Or Similar Equivalent. - Pneumatic Impact Wrench With 1/2 Inch Fitting, Or Similar Equivalent., 2 - Tool Set Composed Of At Least 150 (One Hundred And Fifty) Pieces, Packed In A Rigid Case With A Secure Closing System And Internal Organizing Dividers, Mandatory Containing Chrome Vanadium Steel Sockets In 1/4 And 3/8 Inch Fittings Inch In Metric And Sae Gauges, Combination Wrenches In Chrome Vanadium Steel, Screwdrivers And Phillips Drivers In Various Sizes With Anti-Slip Bi-Material Handle, Universal Pliers, Nose Pliers And Cutting Pliers In Chrome Vanadium Steel With Insulated Handle, General Purpose Hammer With Fiberglass Or Reinforced Wood Handle, Minimum 5 Meter Tape Measure, Spirit Level, Extension Hinged, Reversible Ratchet With Safety Lock, Adapters And Extenders For Sockets, All Components Made Of Heat-Treated Chrome Vanadium Steel With Phosphate Or Chrome Finish For Corrosion Resistance, Suitcase In High-Resistance Polypropylene Or Steel With Ergonomic Handle And Metal Locks, Each Piece Identified With - Tool Set Consisting Of At Least 150 (One Hundred And Fifty) Pieces, Each Piece Identified With G, 3 - Cordless Hammer Drill With Chuck Capacity Of 13 Mm (Thirteen Millimeters), High Energy Efficiency Brushless Motor, Supply Voltage Of 20 V (Twenty Volts) Or Higher In Direct Current, Minimum Maximum Torque Of 90 Nm (Ninety Newton Meter), Drilling Hammer Function In Masonry And Concrete, Variable Speed With Electronic Trigger And Rotation Reversal, Gearbox With At Least 2 Speeds, Metal Chuck With Keyless Quick Release, Clutch System With At Least 20 Torque Adjustment Positions, Minimum Impact Energy Of 2.4 J (Two Point Four Joules), Maximum Vibration Level Of 15 M/S² (Fifteen Meters Per Second Squared), Maximum Weight Of 2.5 Kg (Two Point Five Kilograms) Without Battery, Comes With At Least 2 Lithium Ion Batteries With A Minimum Capacity Of 4.0 Ah (Four Amp Hours), Bivolt Rapid Charger And Rigid Carrying Case, With A Minimum Warranty Of 12 (Twelve) Months. - Cordless Hammer Drill With 13 Mm (Thirteen Millimeter) Chuck Capacity, With A Minimum Warranty Of 12 (Twelve) Months. Ma, 4 - Set Of Screwdrivers And Phillips Screwdrivers Manufactured In Heat-Treated Chrome Vanadium Steel, With Tips Hardened By Specific Heat Treatment, Phosphatized Or Chrome-Plated Finish For Corrosion Resistance, Handles In Non-Slip Bimaterial Material With Ergonomics
|