Tenders Are Invited For Construction Of Lighting In Poręby Kupieńskie in Poland

Work Detail

Construction Of A Section Of The Overhead Street Lighting Network (According To O4 To O14 Documentation), Powered By The Constructed O3 Pole, With An Asxsn 2X25 Mm2 Cable, Suspended On 11 Spun Poles, 12 M High, Placed Directly In The Ground With Footing Plates, Approx. 507/526 M Long. Lightning Arresters Should Be Installed On The O10 And O14 Poles And Grounding Should Be Performed. ≤ 10 Ω. A Set For Portable Earthing Devices Should Be Installed On The Last Pole. Led Luminaires With A Luminous Flux Of Min. 7721 Lm, Mounted On Wo-2 Tubular Booms. Two-Chamber Led Road Luminaires With Factory-Installed Nema 5/7 Pin Sockets And Lighting Controllers. The Marking Of The Poles Should Be Agreed With The Investor. Additionally, The Existing Telensa Lighting Controllers On The Existing Luminaires Should Be Delivered And Replaced With New Smart City Lighting Controllers, 8 Pcs. The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. The Dismantled Controllers Should Be Handed Over To The Ordering Party. The Existing System Is Maintained By Isc Sp. Z O. O., Ul. Krakowska 140A, 34-120 Andrychów. The Task Should Be Submitted For Acceptance To Pge Dystrybucja Energy District Mielec And Completed With Positive Acceptance. Since 7 Years Have Passed From The Design Stage To Implementation, It Is Necessary To Take Into Account The Need To Clear The Lighting Line Route From Bushes, Therefore A Prior Local Inspection Of The Area Is Recommended. Before Starting The Work, The Scope And Completion Date Should Be Agreed With The Property Owners And The Provisions Contained In The Decision Of The Zdp In Kolbuszowa 69/2020 Should Be Taken Into Account. The Cost Of Necessary Cleaning Of The Line Must Be Included In The Offered Price For The Construction Of Lighting. Minimum Requirements For Led Luminaires. 1) Two-Chamber Housing Made Of Die-Cast Aluminum, Tempered Glass With A Self-Cleaning, Scratch-Resistant Coating 2) Powder-Coated Body With Electrostatic Coating 3) The Luminaire Is Made In Class Ii Anti-Shock Protection 6) Ip-Tight Housing For The Luminaire And Accessories 66, Must Include A Pressure Equalizing Filter, 7) Impact Resistance - Ik 088) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K 9) Luminaire Power Supply System Enabling Control Of The 0-10 V Analog Signal 10) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Luminous Flux Of All Led Sources Simultaneously And Not By Turning Off Individual Led Panels In One Luminaire 11) Luminous Efficiency Of The Luminaire (Taking Into Account All Losses) Min. 170 Lm/W12) Power Factor (Cos Φ)≥0.98 For The Rated Power, Maintaining The Power Factor Cos Φ Above 0.96 When Controlling The Luminaire In The Range Of 20-100% Of The Rated Power13) Resistance Of The Luminaire To Overvoltages: 10 Kv.14) The Luminaires Hook Should Be An Integral Part Of The Luminaire And Be Able To Be Mounted Directly On Lighting Poles Without An Additional Adapter, Tilt

Contact Information