|
Flight Controller Type F405 8S With Esc Speed Controller. Fiber Optic Flight Controller: F405 V2 With Dji Support, Stm32f405 Microcontroller, Icm42688 Gyro, Dji Air Unit Support, 3-8S Lipo Input Voltage, Built-In 9V/2A And 5V/3A Bec, Support Ppm/Ibus/Sbus/Dsmx Receivers, Built-In Blackbox Memory 16 Mb, Bosch Bmp280 Barometer (Germany), Gps Support, Control Of Up To 8 Motors, 4 Serial Ports (Uart), Betaflight F4 And Inav Firmware, Led And Buzzer Support, Built-In Betaflight Osd On At7456e Chip, Board Size 37 × 37 Mm, M3 Mounting Holes 30.5 × 30.5 Mm, Weight 9 D. Electronic Speed Controller, At32f421k8u7 Controller, High Performance Mosfet, Input Voltage 3-8S Lipo, Continuous Current 80A, Peak Current 85A (10 Seconds), Support Electrical Feedback, Dshot150/300/600 Configuration Protocol, Firmware Version Am32 At32dev F421 1.99, Overall Dimensions 41 × 21 × 11 Mm, Weight 10.5 G. The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies., Reinforced Frame, With A Set Of Mounting Accessories. Reinforced Frame, With A Set Of Mounting Accessories. Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); Wheelbase: 647 Mm; Propellers: 15″; Frame Size: 517 × 517 Mm; Weight: 754 G; Top Plate Thickness: 2.0Mm; Middle And Bottom Plate Thickness: 4.0Mm; Side Panel Thickness: 2.0 Mm; Beam Thickness: 10 Mm; Camera Installation Distance: 19Mm; Video Transmitter Compatibility: 30.5Mm/20Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25 Mm. The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies., Spare Parts Kit: Propellers - 4 Pcs., Frame - 1 Pc., Motors 4 Pcs. Reinforced Frame, With A Set Of Mounting Accessories. Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); Wheelbase: 647 Mm; Propellers: 15″; Frame Size: 517 × 517 Mm; Weight: 754 G; Top Plate Thickness: 2.0Mm; Middle And Bottom Plate Thickness: 4.0Mm; Side Panel Thickness: 2.0 Mm; Beam Thickness: 10 Mm; Camera Installation Distance: 19Mm; Vtx Compatibility: 30.5Mm/20Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25Mm.Motor: Model 4214 380Kv, Rated Voltage 8S Lipo (30.4V), Operating Range 3-12S, Kv Value 380Rpm, Maximum Power 1312W, Maximum Continuous Current 41A, No-Load Current 1.45A (At 10V), Maximum Thrust Up To 4510G (With 15X7 Or 13X10 Propellers At 8S), 42Mohm Internal Winding Resistance, 12 Slot/14 Pole Configuration (12N14p), Motor Dimensions 51.2X49mm, M4 Base Mount (30X30mm), Supported 13-15 Propellers, Silicone Wiring 14 Awg 150 Mm Long, Motor Weight 195 G. Motor: Model 4214 380Kv, 8S Lipo Rated Voltage (30.4 V), Operating Range 3-12S, Kv Value 380 Rpm, Maximum Power 1312 W, Maximum Continuous Current 41 A, No-Load Current 1.45 A (At 10 V), Maximum Thrust Up To 4510 G (With 15X7 Or 13X10 Propellers At 8S), Internal Winding Resistance 42 Mohm, 12 Slot / 14 Pole Configuration (12N14p), Motor Dimensions 51.2 × 49 Mm, M4 Base Mount (30 × 30 Mm), Supported Propellers 13-15″, 14 Awg Silicone Wire 150 Mm Long, Motor Weight 195 G. Propeller 15″ 3‑Blade: Diameter 15 Inches, Pitch 7, Number Of Blades 3, Material: Fiberglass Composite, Weight 63.9 G, Hub Diameter 220 Mm, Hub Thickness 12 Mm. The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing.
|
