|
Tender for Demolition Of Cement Concrete (Unreinforced) Any Description And In Any Position Not Otherwise Specifically Provided And Removing The Debris Outside The Defence Land Complete All As Specified And As Directed. , M&L For Plain Cement Concrete Type - D2 (1:3:6) (Using 40Mm Graded Stone Aggregate) As In Mass Concrete Complete All As Specified And As Directed. , Dismantling Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Anydescription Or Thickness Infloors, Aprons Etc. Complete All As Specified And As Directed. , M&L Screed Bed Or Bedding Layer Of Mortar 20Mm Thick Using Cm (1:6) For Laying Floor Finishes Complete All As Specified And As Directed , M&L Chequered Cement Concrete Tiles With Grey Cement And Pigment Of Size (20Cm X 20Cm X 25Mm/300Cm X 300Cm X 25Mm) Thick Set And Jointed In Neat Cement Slurry In Floors Complete All As Specified And As Directed , M&L For Precast Concrete Interlocking Paver Blocks With Grey Cement And Pigment Any Shape And Size, Shade As Approved By Ge, 80Mm Thick Conforming To Is 15658-2006 M-40 Gradecomplete All As Specified And As Directed. , M&L For 40M M Thick Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And As Directed. , Dismantling Of Posts Struts (Steel Or Rcc) Any Section Incl Taking Out Embedded Portion In Concrete Or Brick And Making Good Disturbed Ground Complete All As Specified And As Directed. , Dismantling Of Fencing Wire Mesh, Any Type Complete All As Specified And As Directed. , Excavation In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering And Removing Surplus Soil To A Distance N Exc 50 M In Hard/Dense Soil Complete All As Specifed And As Directed , S&F Mild Steel Work Of Angle Iron Or Flat Iron Etc For Railings, Balusters, Nosing To Steps Including Embedding In Concrete And Screwing Etc, Flat Iron For Posts & Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc & Similar Work Conforming To Fe 290 Complete All As Specified And As Directed. , S & F Ms Tie Bars 50Mmx6mm Thick With Screwed Ends, Nuts, Washers And Mild Steel Plates For Walls, Chimneys, Roofs, Arches, Etc. King Rods And Straining Bolts Conforming To Fe 290 Gde-E-165. Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided Complete All As Specified And As Directed. , M & L For Mild Steel Round Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending, Spirally Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.90Mm Dia, Complete All As Specified And As Directed. , Supply Only Chain Link Ms Galvanized Fencing Any Size And Any Type Complete All As Specified And As Directed. , Fixing Only Chain Link Ms Galvanized Fencing Including Wires Any Mesh, Size And Any Type Of Standards Rails, Straining Bolts Etc Including Provision Of Binding Wires Complete All As Specified And As Directed. , S & F In Repairs Galvanised 2 Strand Steel Barber Wire 2.24 Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacing And Straning And Fixing To Any Type Of Standrad Rails Straining Bolts Including Securing Or Tying At Crossing With And Provision Of Galvanised Mild Steel Wire Staples Or Steels Pins Including Taking Down Etc As Directed ( Each Line Of Wore To Be Measured) Complete All As Specified And As Directed. , Mild Steel Screw Bolt 11 To 15 Mm Shank Dia Neck (Machine Made) With Hexagonal Or Square Head At One End And Screws The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washer And One Hexagonal Or Square Nut Exc 5 Cm N.Exc 10 Cm Long Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Of Any Description Over 10 Cm Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And As Directed. , Materials And Labour For Plain Cement Concrete (1:3:6) Type C-2 Using 40 Mm Graded Aggregate As In Surface Channels And Drains Complete All As Specified And Directed. , Formwork To Faces Of Walls, Retaining Walls, Abutments, Parapets & Staircase Railing And Similar Work Including Attached Pillasters, Buttresses, Etc.; Vertical Or To Better Rough Finished Surfaces Of Concrete Flat, Complete All As Specified And As Directed. , Materials And Labour For Extra For Forming Fair Finishing To Surfaces Drain/Channel 30 Cm Inner Girth In Cement Concrete ,Using Extra Cement Incl Forms, Moulds Etc Complete All As Specified And As Directed. , M&L For Rendering 15 Mm Thick Plaster On Fair Faces Of Brick/Concrete Surfaces In Cm (1:6) On Internal Wall Surface, Finished Even And Smooth Without Using Extra Cement. Complete All As Specified And As Directed. , M & L For Plain Cement Concrete 1:3:6 Type C2 (Using 40 Mm Graded Aggr) In Foundations, Filling And Massconcrete. Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws.Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Thickness, Complete All As Specified And As Directed.
|
