|
Trapezoid Set In High-Impact Plastic Resin - Set Consisting Of 06 Tables, 06 Chairs And 1 Central Table – Child Size Trapezoid-Shaped Table, Enabling The Formation Of Circles With 6 Tables, 06 Chairs And A Central Table, For Collective And Non-Individual Use. Table With Trapezoidal Shaped Top Made Of Medium Density Wood Fibers, With High-Resistance Melamine Coating On Its Surface, Containing 678Mm Wide On The Larger Base, 245Mm Wide On The Smaller Base, 479Mm Depth And 25Mm Thick. Plastic Sides Injected Around The Entire Top In Hdpe Plastic Material (High-Density Polyethylene) Without Any Seams And/Or Gluing, 28 Mm High, Also Containing On These Same Plastic Sides, 01 Pen/Pencil Holder 229 Mm Long, 32 Mm Wide And 10 Mm Deep, Integrated Into The Smaller Base Top, With Capacity For An Average Of 04 Pencils/Pens User Contact Edge In Convex Format, Presenting A Radius Greater Than 680Mm. Approximate Height From Top To Floor Of 590Mm. Components Assembled On A Carbon Steel Tubular Structure, Produced In Round Tubes With A Diameter Of 22.22Mm That Form The Legs And The Base Of The Top, Front Connection Bar Also In A Round Tube With A Diameter Of 15.87Mm, Providing Greater Stability And Greater Safety. Two Reinforcement Bars On The Top In Carbon Steel With A Diameter Of 15, Increasing The Resistance And Stability Of The Work Surface. Semicircular Shoe Following The Contour Of The Tube, Providing A Minimum Increase Of 5 Mm In Relation To The Ground. The Entire Metal Structure Is Manufactured From Industrial Steel Tubes Treated With Sets Of Chemical Baths For The Protection And Longevity Of The Structure, Welded Using The Mig System And Electrostatically Painted In Gray. Stackable Chair With Seat And Back In Pp Plastic Resin (Polypropylene). The Backrest Is Approximately 340Mm Wide By 280Mm Wide, 4-Seat Lunch Set With Supervisor Chair. Table With Top Made Of 30Mm Multi-Laminated Plywood With Pvc Edges Around Its Entire Perimeter, Fixed To The Structure Using Screws. Measuring 1830 X 960 Mm, With 04 Cavities 300 X 240 Mm. Seats Built In Injected Thermoplastic Resin With A Useful Area Of 290 120Mm Height 100Mm Width. A Nylon Seat Belt On Each Seat. The Seat Must Have A Rounded Finish So As Not To Hurt Childrens Legs. Rear Side Of The Table In The Form Of An Arc With 1000 Mm In Area, Allowing Easy User Access To All Points Of The Table. Top/Floor Height 760 Mm. Top Support Structure Formed By 20X48 Mm Oblong Tubes, Molded According To The Curvature Of The Top, 50 By 30 Mm Tubes At The Ends Of The Internal Part Of The Top, 4 Columns, 2 On Each Side, In Rectangular Industrial Steel Tubes 80 By 40 Mm Connecting The Top Structure To The Feet, 1 Bar Support Between Side Columns In Rectangular Tube Measuring 50 X 30Mm. Double Ski-Shaped Feet Made From 50 X 25 Mm Tube. Front Shoes Measuring 50 X 50Mm And Rear Shoes Measuring 50 X 200Mm, Non-Slip And Also With Protection Function, Baby Stroller
|
