|
New Backhoe Loader, Driven And Turbocharged, With 4X4 Configuration, Equipped With A Closed Cabin And Intended For The Operational Activities Of The Waste Treatment Center (Ctr). The Equipment Must Have A Cabin Equipped With Rubber Carpet, Fully Adjustable Vinyl Seat, Steering Wheel With Soft Finish, Two Access Doors, Seat Belt, High Visibility Rear View Mirrors, Courtesy Light, Front Windshield Wiper, Horn And Reverse Alarm. The Instrument Panel Must Include Tachometer, Hour Meter, Fuel Level, Coolant Temperature And 12V Socket, In Addition To An Audiovisual System Indicating Fuel Pressure, Coolant Temperature, Engine Oil Pressure, Air Filter Obstruction, Transmission Oil Pressure And Temperature And Parking Brake Activation. The Equipment Must Have Air Conditioning And Heating, Complying With Abnt Nbr En Iso3471:2008 (Rops) And Iso3449:2008 Certifications, Stump Truck, Zero Kilometer, Equipped With A Tipper Bucket With A Minimum Capacity Of 6 M³, Made Of Reinforced Steel Sheet. The Vehicle Must Have A Diesel Engine With A Minimum Power Of 182 Hp, A Transmission System With At Least 6 Forward And 1 Reverse Gears, As Well As A Minimum Total Gross Weight (Pbt) Of 13,000 Kg. The Equipment Must Be Equipped With All The Safety Items Required By Contran, Including Tachograph, Speed Limiter And Complete Safety System. Signage, In Compliance With Current Traffic And Vehicle Safety Regulations. The Vehicle Must Have A Minimum Factory Warranty Of 12 (Twelve) Months, A Waste Lifting Conveyor With Integrated Hopper, Consisting Of A Monoblock Structure Made Of Steel Sheets, With A Flat Base For The Belt To Slide And High-Resistance Electrostatic Painting, And Must Have A Minimum Length Of 6,000 Mm And A Maximum Of 10,000 Mm, As Well As A Minimum Total Width Of 1,380 Mm. The Equipment Must Be Equipped With A Feeding System Using A Reception Hopper In A Metal Structure, Designed To Line The Pit In The Lower Part Of The Conveyor Belt, Allowing Direct Discharge Of Waste To The Ground Level. The Belt Must Have A Minimum Usable Width Of 1,000 Mm, Equipped With Fixed Lugs Of A Minimum Width Of 800 Mm And A Minimum Height Of 50 Mm, In Addition To A Pressed Clamp Splice Specifically For Lifting Systems. The System Must Have A Gear Motor With A Minimum Power Of 3 Hp, Operational Control Through A Frequency Inverter And Speed Regulation Via A Potentiometer In The Range Of 0 To 8 M/Min, A Waste Separation (Sorting) Belt, Intended For The Operational Activities Of The Waste Treatment Center (Ctr), And Must Have A Minimum Length Of 10,500 Mm, Total Width Of 1,380 Mm And Height Of 1,010 Mm, With A Minimum Useful Screening Width Of 1,000 Mm. The Equipment Must Be Constructed Of A Metal Structure With Anti-Corrosive Coating And Electrostatic Painting, Having A Flat Base Made Of Steel Sheet For Sliding The Belt And Side Protection Made Of Rubber. The Motorization Must Consist Of An Electric Gearmotor With A Minimum Power Of 1 Kw, Equipped With A Speed Variation System Through A Frequency Inverter And Potentiometer, Allowing Operational Adjustment In The Range Of 0 To 8 M/Min. The Equipment Must Have Machined And Galvanized Traction Rollers, As Well As Bearings With An Adjustment System For Belt Alignment., Vertical Baler Press With Capacity
|
