|
Repair For Flush Valve, Hidra Type Dn 1 1/4 15 X 15Cm. Meet The Current Abnt Nbr Standard(S)., Round, Dimensions 10 X 10Cm Meet The Current Abnt Nbr Standard(S)., Dimensions 15 Vdb, Vdk Drain Valve., Siphon, Accordion, Universal, In Pvc, Comes With 2 Plastic Seal Rings And 1 Inlet Adapter With Fittings For Sizes Of 7/8 Inch (22 Mm), 1 1/4 Inch (32 Mm) And 1 1/2 Inch (40 Mm). Outlet Compatible With 40 Mm And 50 Mm Tubes. The Body Of The Product Must Be Engraved With: The Brand Or Identification Of The Manufacturer. Labeling: Must Contain Legibly And Indelibly, In Portuguese (Brazil), The Information: Name/Cnpj Of Manufacturer, Brand; Type Of Use Of The Product; Nominal Diameter; Composition. The Product Must Comply With The Following Current Legislation: Abnt Nbr Standard - Which Establishes The Requirements And Test Methods For Sanitary Appliance Siphons., Dimensions 10 X 10Cm. Comply With The Current Abnt Nbr Standard(S)., Pvc Coupling, Flexible, Complete, Dimensions 40 Cm Quick Closing, ½ Inch. Packaging With Product And Manufacturer Identification Data., 3/4 Inches. Packaging With Product And Manufacturer Identification Data., In Copper, Canopy And Crosshead, 1/2 Inch. Packaging With Product Identification Data And Manufacturers Brand., Colorless Silicone, For Sealing. Packaging: Tube With 280G. Labeling: The Following Information Must Be Printed Or Pasted Or Stamped (Legible And Indelible) By The Manufacturer Directly On The Packaging In Which The Product Is Packaged: Name/Cnpj Of The Manufacturer, Brand, Address, Composition, Date Of Manufacture Or Batch, Expiration Date Or Expiration Date, As Well As The Risks Posed To The Health And Safety Of Consumers. On The Date Of Delivery, The Expiration Date Indicated For The Product Must Not Have Been Exceeded By Half, Taking As A Reference The Date Of Manufacture Or The Expiration Date Printed On The Packaging., Tape, Thread Seal, In Ptfe (Polytetrafluoroethylene), Dimensions 18 Mm X 50 M, Tolerance Of -2%. Packaging: Containing 01 (One) Roll. Labeling: Must Contain, Legibly And Indelibly, The Information: Name/Cnpj Of The Manufacturer; Product Name; Mark; Batch And/Or Date Of Manufacture And Size. The Product Must Comply With The Following Current Legislation: Inmetro Ordinance - Which Consolidated Metrological Technical Regulation On The Metrological Control Of Pre-Packaged Goods, Sold In Units Of Length And Number Of Units, With Equal Nominal Content. Abnt Nbr Standard - Specifies The Minimum Requirements And Test Methods For The Manufacture Of Non-Sintered Polyte-Trafluoroethylene (Ptfe) Tapes Used In Sealing Threaded Joints Where The Sealing Is Made By Thread, With A Minimum Composition Of 99% Ptfe Resin And, Suitable For The Minimum Working Temperature Of - 197 °C And A Maximum 260 °C (Intrinsic Characteristic Of The Resin).
|
