|
Mixed Wood Line 7M, Mixed Wood Line 5M, Double Sided Mdf 15Mm, Pine Board 0.02-0.30-3.00, 1X2 Lath, 1X3 Lath, 1X5 Lath, Mixed Wood Beam 5X5, Mixed Board 0.30X3.00M 0, 02Mm, 3M Mixed Wood Beam, 1Kg Wood Contact Glue, 90Cm Jamb/Portal/Aduel, 80Cm Jamb/Portal/Aduela, 70Cm Jamb/Portal/Aduel, Trim / Smooth / Smooth View In Solid Wood, For Door, E = *1* Cm, L = *5* Cm, Pine / Eucalyptus / Ferrule Or Regional Equivalent, Resinated Plywood Sheet/Panel (Pink Resinated Wood) For Concrete Form, 2200 12 Mm, E = 10 Mm, Rafter 5 5M, 2 Steel Tube, 0.4Mmx60cm Zinc Plate, Reinforced Column 7X17 - 6M, Reinforced Column 17X17 From 6M, Reinforced Column 7X17 From 3M, Reinforced Column 17X17 From 3M, Hexagonal Metallic Screen, Mesh 1/2, 26 Bwg X 1.5 M, With 50 M, Square Channel Of Galvanized Steel Sheet Number 24, Cut 50 Cm, Metalon 20X20 6M 1.5Mm And 1.8Mm, Straight Support Bar, In Aluminum, Length 60Cm, Minimum Diameter 3Cm, Zinc Or Aluminum Sheet 5Mmx40cm, Zinc Or Aluminum Sheet 5 Mm 154 Kg/M, With Gauge Of 6, 222 Kg/M, With Gauge Of 8, 302 Kg/M, Ca-60 Steel Rebar, With Gauge Of 10. 0 Mm (3/8), Approximate Weight Of 7. 40 Kg Per Piece And Approximate Linear Mass Of 0. 617 Kg/M, High Resistance 600Mpa, Folded And Cut, Whole Or Cut Piece, Combustion Brushcutter, 2 Stroke, With 40.2 Cc Engine, Minimum Power Of 1.6 Kw /2.2 Cv, And Minimum Power In Hp Of 2.10 (Reference Model: Fs350, Dn300-3 Among Others)), Minimum Power Of (Kw/Cv)1, 5/2, 0; Minimum Cylinder Capacity Of 37.7Cm³ With A Minimum Cutting Tool Diameter Of 420Mm, Left/Right Vibration Level 4.7 / 4.0 M/S², Combustion Brush Cutter With 3-Sided Blade, 0; Minimum Cylinder Capacity Of 41.6Cm³ With Cutting Tool With 3-Knife Blade, Ø 300 Mm, Left/Right Vibration Level (M/S²)2, 6 - 2.9 / 2.7, 7Cm³ With Cutting Tool With 3-Knife Blade, Left/Right Vibration Level (M/S²) 4, 2 / 4, 6, , Lubricating Oil For Chain Saw Chain 1L, 2 Stroke Oil For Brushcutter, Air Filter Fs 300, Air Filter Fs 221, Trimcut 42-2 Cutting Head 160, 220, 280, Leather Apron For Brushcutter, Support Belt For Brushcutter, Round File For Brushcutter 5, 2X200, Helmet With Mesh Facial Protector And Earmuff For Brushcutter, Square Nylon Thread For Brushcutter With Minimum Measurements Of 3.0Mm Uniform Spacing Of 1.5 Mm Between Ceramic, Porcelain Or Tile Pieces. Reusable Material That Optimizes Working Time. Packs Of 100, Superfine Grout - Cementitious Mortar With An Extra Smooth Finish, Waterproof And With Anti-Mold Protection, Ideal For Porcelain And Ceramic Tiles In Internal And External Areas. Availability
|
