|
Mast Manufacturing And Installation Service. Specification: For Raising Flags Fixed To Tubes Of At Least 4 In Galvanized Steel, With Reel And Other Accessories, Flanged At The Base For Fixing With Four Screws, Measuring 5M And 6M, Service For Manufacturing An Iron Grid In A Round Laminated Profile. Specification: With A Minimum Thickness Of ½, Gaps Of 10Cm, With An Anti-Corrosive Base And Two Coats Of Synthetic Enamel Applied To The Gun. Supply And Installation., Iron Grid Manufacturing Service, Brick Model. Specification: With Square Laminated Profile With A Minimum Thickness Of ½, Manufacturing Service For Removable Hot-Dip Galvanized Iron Posts. Specification: 6 Meters Long, Diameter Of 3, With Anti-Corrosive Base For Galvanized With Two Coats Of Synthetic Enamel., Service For Manufacturing Removable Poles For Volleyball. Specification: In Hot Galvanized Iron Pipes, Gutter Or Attic Water Making Service. Specification: In Galvanized Sheet No. 26 (0.50Mm), Variable Development, Take Measurements On Site, Installation Included, Gutter Seal, Screws And Other Accessories Used For Fixing M²., Galvanized Sheet Manufacturing Service. Specification: 3.00 X 1.20., Circular Conductor Making Service. Specification: Galvanized Sheet No. 26, 100Mm Diameter Supply And Installation M²., Tube Handrail Making Service. Specification: Galvanized Steel 1/2 With Clamp, With Anti-Corrosive Bottom For Galvanized And M²., Iron Grid Making Service On 1/2 Rods. Specification: With Anti-Corrosive Background And Two Coats Of Synthetic Enamel Applied By Gun Supply And Installation M²., Rectangular Iron Grid Manufacturing Service 20X30mm. Specification: Fixed To A 20X30mm Iron Profile With A Thickness Of 2.25Mm, With An Anti-Corrosive Base And Two Coats Of Synthetic Enamel Applied With A Spray Gun. Supply And Installation M²., Dustbin Making Service. Specification: With 2 X 1 Carbon Steel Tubes, 50 X 50 Cm With 2 Feet, Basket With Bar, 50 Diameter Coin Screen Basket, Steel Door Manufacturing Service. Specification: 02 Iron Sheets 3, 15 X 2, 10 Height, Metalon Frame 30 Specification: With 2.5 Inch Tube, 16 Plates, Frame To Receive Screen With 3/4 Specification: 20X30mm In Thickness 2, Fixed To An Iron Profile 40 Specification: Including All Hardware And Padlock Holder, With Anti-Corrosive Base And Two Coats Of Synthetic Enamel. Supply And Installation M²., Sliding Gate Manufacturing Service In Beaded Galvanized Iron Sheet. Specification: Fixed In 40 Specification: Galvanized Wire Mesh, 12 Bwg Wire, 5 X 5Cm Square Mesh, D Manufacturing Service
|