|
4-Column Automotive Lift, With A Minimum Capacity Of 4,000 Kg - 4-Column Automotive Lift, With A Minimum Capacity Of 4,000 Kg, Designed For Lifting Light And Utility Vehicles To Carry Out Preventive And Corrective Maintenance Services, Aiming To Meet The Needs Of The Municipal Administration. The Equipment Must Be Of The 4-Column Automotive Elevator Type, With The 4B-4000 Or Equivalent/Higher Model As A Reference, With A Minimum Load Capacity Of 4,000 Kg, Electromechanical Or Hydraulic Drive, Depending On The Manufacturer, And An Electric Motor Consisting Of 2 Motors Of At Least 4 Hp Each. It Must Have A Column Height Of Approximately 2,480 Mm, A Minimum Lifting Height Of 1,900 Mm, A Base Width Of Approximately 3,430 Mm, A Total Length Of Approximately 2,810 Mm, A Width Between Columns Of Approximately 2,895 Mm, A Width Between Carts Of Approximately 2,480 Mm And A Maximum Lifting Time Of 48 Seconds. The Structure Must Be Made Of High-Strength Steel, With A Platform Suitable For Light And Utility Vehicles, A Mechanical Safety Locking System In Multiple Positions And A Synchronization System Between Columns. The Equipment Must Have Safety Devices, Including Automatic Locks, A System Against Involuntary Falling Or Descent And An Emergency Stop Button, When Applicable. The Product Must Be New, Unused, Have A Minimum Warranty Of 12 Months, Installation Included When Applicable, And Meet Current Technical And Safety Standards. The Equipment Must Be Of The Angle Grinder Type, Have A Disc Diameter Of 4 1/2, Equivalent To 115 Mm, Minimum Power Of 850 W, Voltage Of 110 V, No-Load Rotation Of Approximately 11,000 Rpm, Shaft With M14 Thread And Approximate Weight Of 1.7 Kg. It Must Have A Protective Cover With An Adjustment System Quick, Self-Shutting Carbon Brushes, Stator With Additional Dust Protection And Ergonomic Auxiliary Side Handle. Must Include The Equipment, Auxiliary Handle, Flange, Fastening Nut, Pin Wrench And Protective Cover Or Covers. Superior., Electric Breaker Hammer (Hammer). - Electric Breaker Hammer, Intended For Carrying Out Demolition Services, Breaking Concrete, Masonry And Other Materials, In Order To Meet The Demands Of The Municipal Administration. Breaker With Impact Drilling, Impacts Per Minute Of 1,300 Ipm, Minimum Impact Energy Of 41 J, According To Epta Standard, Admitting Higher Energy Of Up To 45 J, Minimum Removal Rate Of 1,700 Kg/H In Medium To Hard Concrete, Approximate Vibration Level Of 13.0 M/S² And Approximate Weight Of 18.5 Kg. Must Have Robust Structure For Professional Use, Vibration Absorption System And Ergonomic Handle With Adjustment. Must Include Equipment, Self-Sharpening Pointer, Grease Tube, Cleaning Cloth And Carrying Case. Motorcycle
|
