|
Iae. Steel Clamp Clamp. Clamp Diameter: From 60 To 65Mm. Material: Galvanized Steel. Construction: Steel Wire And Tie Bolt. Clamp Type: Stationary. Gost 28191-89. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics. Ball Valve, Steel, Size Up To 50 Mm. Type: Coupling (Threaded). Control Type: Manual. Valve Function: Three-Way. Nominal Diameter (Dn/Dn): 10 Mm. Thread (Inches): 3/8. Operating Pressure: Up To 6.3 Mpa (63 Bar). Body Material: Stainless Steel. Seal: Ptfe. Certificate., Iae. Brass Ball Valve, Nominal Pressure 0-420 Mpa, Diameter 10-1400 Mm, Manual. Three-Way Valve With A Diameter Of 15 Mm. With Tension Nut. Thread: M20x1.5 (Internal), M20x1.5 (External). Working Pressure Up To 25 Bar (2.5 Mpa). Maximum Temperature: 150°C. Body Material: Brass. Seal: Ptfe Gasket. St Rk Iso 7121-2017 Certificate., Iae. Sealant Is One-Component Polyurethane Adhesive. Properties: High Modulus And Low Conductivity. Curing Speed 3-4 Mm In 24 Hours. The Volume Of The Tube Is At Least 310 G. Consistency: Paste, Black. Density 1.27 G/Cm³. The Polymerization Mechanism Is Moisture-Curing, Accelerated. Recommended Application Temperature Is 50 To 65°C. Gost 25621-2023. Certificate., Iae. Steel Clamp Clamp. Clamp Diameter: 50 To 55 Mm. Material: Galvanized Steel. Construction: Steel Wire And Tie Bolt. Clamp Type: Stationary. Gost 28191-89. Certificate., Iae. Teflon Tape, Thickness 100-200 Microns. Material: 100% Teflon. Length Not Less Than 10 M, Width Not Less Than 12 Mm, Thickness Not Less Than 0.2 Mm (200 Microns). Gost 24222-80. Certificate., Iae. Steel Clamp Clamp. Clamp Diameter: 140 To 150 Mm. Material: Stainless Steel. Fastening Material: Stainless Steel. Metric Thread Size M16. Mounting Plate: With Screw Clamp. Purpose: Holder Of An Insulated Lightning Rod. Thread M16×50. Gost 28191-89. Certificate., Iae. Steel Clamp Clamp. The Clamp Is A Steel Structure Of Two Half-Rings Connected By Screws. Rubber Gasket. Clamp Diameter: From 39 To 45 Mm. Clamp Material: Galvanized Steel. Fastening: Welded Nut With M8/M10 Thread. The Clamp Is Complete With A Pin-Screw And Dowel. Gost 28191-89. Certificate., Iae. Cornice Strip, Made Of Galvanized Steel. Functional Technical, Quality, Operational Characteristics: Bar (Mount) For Pvc Curtains 200Mm Wide. Mounted On A Special Comb (Cornice) 1 M Long. The Set Includes At Least 6 Fasteners. Fastening Material Galvanized Steel. Certificate., Iae. Door Lock, Metal. Clamp Type: Mechanical. Stainless Steel Base. Pressure Screw: M4x25mm. Maximum Force Not Less Than 450 N. Type: Lever Clamp. Clamp Type: Horizontal. Purpose: On Wood, Metal, Plastic, Glass. Landing Area Size 25X25 Mm. The Bushings Are Hardened. Clamp Material: Stainless Steel. Lining Material Is Silicone. Certificate. Gost 538-2014., Iae. Steel Clamp Clamp. The Clamp Is A Steel Structure Of Two Half-Rings Connected By Screws. Rubber Gasket. Clamp Diameter: 88 To 94 Mm. Clamp Material: Galvanized Steel. Fastening: Welded Nut With M8/M10 Thread. The Clamp Is Complete With A Pin-Screw And Dowel. Gost 28191-90. Certificate., Iae. Steel Ball Valve, Nominal Pressure 0-420 Mpa, Diameter 10-1400 Mm, Pneumatic/Hydraulic. Ball Valve With Double Acting Pneumatic Actuator. The Kit Includes A Rotary Pneumatic Actuator, An Electric Pneumatic Positioner (Distributor) And Limit Switches For Position Signaling. Conventional Diameter (Dn): 50 Mm (2 Inches). Construction Type: Ball. Flow Direction: Three-Way. Type Of Design: Mayevsky 4. Thread Diameter, Inches: 2. Operating Pressure From 4 Mpa To 6.3 Mpa. Drive Type: Rotary Pneumatic, Double Acting (Air-To-Air). The Kit Includes: 1) Full Bore Ball Valve, Stainless Steel Material; 2) Pneumatic Actuator: Rotary. 3) Pneumatic Distributor: Electromagnetic 220V; 4) Limit Switch: Limit Switch Block (Mechanical Or Inductive). Connection: Gost 34293-2017., Iae. Technical Pressure Gauge. Device Type: Pressure Gauge For Precise Measurements. Measuring Range: 0 To 0.6 Mpa. Accuracy Class: 0.6 (Permissible Error 0.6% Of Scale). Case Diameter: 160 Mm. Connecting Thread: M20x1.5. Connection Location: Radial (Bottom). Vibration Resistance At An Amplitude Of 0.1 Mm (From 5 To 25 Hz). Degree Of Protection: At Least Ip40. Verification No Earlier Than 2025. The Product Must Have A Certificate Of Approval Of The Si Type, A Passport And Be Included In The Register Of The Ssi Of The Republic Of Kazakhstan. Gost 2405-88. Certificate ., Iae. Technical Pressure Gauge. Device Type: Pressure Gauge For Precise Measurements. The Upper Limit Is 2.5 Mpa. Case Diameter: 160 Mm. Accuracy Class: 0.6 (Permissible Error ±0.015 Mpa). Measuring Range: From 0 To 2.5 Mpa. Fitting Thread: M20x1.5. Connection Location: Radial (Bottom). Degree Of Protection: Ip40. Verification No Earlier Than 2025. The Product Must Have A Certificate Of Approval Of The Si Type, A Passport And Be Included In The Register Of The Ssi Of The Republic Of Kazakhstan. Gost 2405-88. Certificate ., Iae. Functional, Technical, Quality And Performance Characteristics. Strip Curtain Made Of Polyvinyl Chloride. Standard Strip Curtains Are Used To Separate Work Areas, Protect Against Dust, Noise And Are Intended For Rooms With Temperatures From Minus 5°C To Plus 50°C. Tape Width 200 Mm, Thickness Not Less Than 2 Mm, Length 3 M. Material Pvc. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics. Wall Hinge For Mounting Industrial Panels And Cabinets. Loop Sheet, Overhead, Metal. Length: 50 Mm. Width: 50 Mm. Material: Painted Steel. Coating: Powder Coated. Mounting Hole Diameter: Ø6 Mm (4 Holes). Distance Between Holes: 30X30 Mm (4 Holes). Opening Angle: From 180° To 270°. Gost 5088-2005 Certificate., Iae. Functional, Technical, Quality And Performance Characteristics. Perforated Rail, Mounting, Fastening Rail (Toothed Comb) Is Designed For Fastening Strip Curtains. Width 200 Mm, Length 1000 Mm. Material: Galvanized Steel. Certificate., Iae. Filter Cloth, Cotton. Composition: 100% Cotton. Density Not Less Than 400G/M2. Roll Width Is At Least 2 M. Material Thickness Is From 5 To 50 Mm. Gost 332-91. Certificate., Iae. Pneumatic Vibrator, Ball Vibrator Is Used To Eliminate Compactions And Sticking Of Bulk Materials In Bunkers And Transportation Systems. Functional Technical, Quality, Operational Characteristics. Housing: Aluminum With A Hard Anodized Finish To Resist Corrosion. Air Supply Pressure 0.2 Mpa. Noise Level: From 57 To 62 Dba. Temperature Range: From Plus 100°C To 120°C. Connection: Thread G1/8. Oscillation Frequency From 5000 To 5100 Rpm. Driving Force 34 N. Air Flow From 0.5 To 0.8 L/Min. Certificate., Iae. Steel Clamp Clamp. The Clamp Is A Steel Structure Of Two Half-Rings Connected By Screws. Rubber Gasket. Clamp Diameter: 25 To 29 Mm. Clamp Material: Galvanized Steel. Fastening: Welded Nut With M8/M10 Thread. The Clamp Is Complete With A Pin-Screw And Dowel. Gost 28191-89. Certificate.
|
