|
Turning Holder For External Machining With Replaceable Inserts, Cross-Section 25×25 Mm, Leading Angle 95°, Type Dclnr2525m12 Or Equivalent, For Installing Replaceable Inserts Type Cnmg 1204. The Product Is New, Without Defects And Signs Of Use., Replacement Turning Carbide Insert Snmg 120408 Orm Os212 Or Equivalent, Multifaceted, For External Turning, Apex Radius 0.8 Mm., Internal Groove Turning Holder With Replaceable Insert, Type Mgivr 2520-4 Or Equivalent, Holder Diameter Ø20 Mm, Right-Hand Version, For Machining Internal Grooves 4 Mm Wide., Replacement Drilling Carbide Insert Spgt 07T308 Orm Or1315 Or Equivalent, For Case Drills, Size 07, Apex Radius 0.8 Mm, For Drilling Metals., Centering Drill 3.15 Mm, Р6м5, D=8 Mm, Type A, Ground, Gost 14952-75 Or Equivalent, For Making Centering Holes., Threaded Turning Holder For Internal Threads, Type Snr 0020 Q16 Or Equivalent, Diameter/Size R20, For Replaceable Threaded Inserts Size 16., Reinforced Three-Jaw Drill Chuck, Clamping Range 3–16 Mm, B16 Seat Cone, For Securing The Drilling Tool., Turning Holder For External Machining, Cross-Section 25×25 Mm, Type Dsdnn 2525 M12 Or Equivalent, For Replaceable Inserts Type Snmg/Snmm 1204., Adapter Sleeve Km5–Km3, Gost 13598-85 Or Equivalent, Is Designed For Installing A Tool With A Morse Taper Km3 Into The Mounting Hole Km5., Adapter Bushing Km3–Km2, Gost 13598-85 Or Equivalent, Designed For Fastening Cutting Tools With A Morse Tapered Shank., Replacement Multifaceted Turning Insert Cnmg 120404 Or Equivalent, For Turning Holder 25X25 Mm, Designed For External Metal Processing. Material - Hard Alloy With Wear-Resistant Coating., Turning Holder For External Grooving, Cross-Section 25×25 Mm, Type Mgehr 2525-4-T10 Or Equivalent, For Replaceable Groove/Cutting Plate 4 Mm Wide., Turning Holder For External Machining, Cross-Section 20×20 Mm, Type Ddjnr 2020 K11 Or Equivalent, For Replaceable Inserts Type Dnmg 1104., Adapter Sleeves For Direct Clamping, Designed For Installing A Tool With A Cylindrical Shank Into An Axial Holder/Machine Tooling. Standard Sizes Must Ensure Compatibility With The Purchased Holder And Tool., Threaded Turning Holder For External Threads, Cross-Section 20X20 Mm, Type Swr 2020 K16 Or Equivalent, For Replaceable Threaded Inserts Size 16., The Shank For The Three-Jaw Drill Chuck, Compatible With The Chuck With B16 Cone Seat, Is Designed To Install The Drill Chuck On Machine Tools. The Standard Size Must Be Coordinated With The Existing Equipment.
|
