|
Lot 1 - Mechanical Demolition Of Reinforced Concrete With Hydraulic Excavator., Lot 1 - Excavation Using Backhoe Loader On Wheels With Loader, 4X4 Traction, Lot 1 - Loading, Maneuvering And Unloading Soil And Granular Materials On 6 M Dump Truck - Loading With Wheel Loader (1.7 To 2.8 M Bucket / 128 Hp) And Free Discharge (Unit: M), Lot 1 - Transport With 14 M Dump Truck, On Urban Road In Natural Bed (Unit: Txkm), Lot 1 - Manually Arranged Stone Rockfill - Produced Hand Stone - Making And Laying, Lot 1 - Hand Stone Ballast Or Rachao - Manual Spreading., Lot 1 - Compacted Commercial Crushed Stone Ballast With Vibratory Socket - Manual Spreading, Lot 1 - Radier Execution, 20 Cm Thickness, Fck = 30 Mpa, Using Forms In Sawn Wood, Lot 1 - Loading And Maneuvering Pre-Cast Concrete Staves On Mechanical Horse With 22 T Semi-Trailer - Loading With 45 Crane Truck T.M, Lot 1 - Transport With Truck Body With Crane (Munck) Maximum Load Moment 11.7 Tm, On Urban Road In Natural Bed (Unit: Txkm), Lot 1 - Bscc Body - Closed Section Of 2.0 Commercial Sand And Gravel, Lot 1 - Application Of Geotextile Blanket On The Rigid Joints Of Pre-Molded Reinforced Concrete Staves., Lot 1 - Grade Fgk=20 Mpa; Traco 1:0, 04:1, 8:2, 1 (In Dry Mass Of Cement/Lime/Coarse Sand/Gravel 0) - Mechanical Preparation With Concrete Mixer 400 L., Lot 1 - Mechanically Excavated Pile, Without Stabilizing Fluid, With 40Cm Diameter, Manually Cast Concrete (Exclusive Mobilization And Demobilization), Lot 1 - Assembly Of Pile Reinforcement, Diameter = 32.0 Mm., Lot 1 - Mechanical Drilling Of Reinforced Concrete Pile, Diameter Of Up To 40 Cm, Lot 1 - Thin Concrete Ballast, Applied To Crowning Blocks Or Footings, Thickness Of 5.0Cm, Lot 1 - Manufacture, Assembly And Dismantling Of Formwork For Footing, In Sawn Wood, E=25 Mm, 2 Uses., Lot 1 - Block Frame, Baldrame Beam Or Footing Using 6.3Mm Ca-50 Steel - Assembly, Lot 1 - Concreting Of Footings, Fck 30 Mpa, With Use Of Jerica Launching, Densification And Finishing., Lot 1 - Assembly And Disassembly Of Pillar Forms Rectangular And Similar Structures, Simple Right-Foot, 2 Uses, Lot 1 - Wing Wall Frame And Head Wall Using 6.3 Mm Ca-50 Steel Assembly, Lot 1 - Wing Wall Frame And Head Wall Using 8.0 Mm Ca-50 Steel Assembly, Lot 1 - Concrete Fck = 25Mpa, Trace 1:2, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 400 L., Lot 1 - Manufacture Of Form For Beams, In Resin Plywood Sheet, E= 17 Mm., Lot 1 - Frame For Execution Of Radier, Concrete Floor Or Slab On Ground, Using Screen Q-138, Lot 1 - Radier Concreting, Fck 30 Mpa - Launch, Lot 1 - Execution And Compaction Of Backfill With Predominantly Sandy Soil - Excluding Soil, Excavation, Loading And Transport, Lot 1 - Medium Gravel For Road, Lot 1 - 1, 10M Galvanized Steel Railing, Tubular Mounts Of 1.1/4 Spaced At 1.20M, Top Crossbeam At 1.1/2, Grating Formed By Horizontal Tubes At 1 And Vertical Tubes At 3/4, Fixed With Mechanical Anchor., Lot 1 - Steel Delineator Plate - 0.30 1 - Galvanized Metal Support For Warning Or Regulatory Plate - Side Or Diameter
|
