Tenders Are Invited For Road Construction Works – Rdw In Biała Podlaska: Reconstruction Of The Provincial Ro ... in Poland

Work Detail

Road Construction Works – Rdw In Biała Podlaska: Reconstruction Of The Provincial Road No. 808 Łuków – Serokomla – Kock – National Road S19 In The Scope Of The Pedestrian Road From Km 16+983 To Km 17+706. The Subject Of The Order Are Construction Works Consisting Of: Reconstruction Of The Provincial Road No. 808 Łuków - Serokomla - Kock - National Road S19 In The Scope Of The Pedestrian Road From Km 16+983 To Km 17+706. The Scope Of Works Includes: 1) Measurement Works Together With The Preparation Of An As-Built Inventory And Registration In The District Center For Geodetic And Cartographic Documentation; 2) Cutting Down Trees 15-25 Cm In Diameter, Including Grubbing Up Trunks (Carp), Clearing Branches And Harvesting Wood; 3) Mechanical Cutting Of The Bituminous Surface And Concrete Base Before Placing The Curb (Sidewalk Next To The Road, Exits, Pedestrian Crossings); 4) Dismantling The Foundation And Surface (Paving Stones And Foundation) To The Thickness Of 20 Cm Including Clearing The Rubble And Handing Over The Paving Stones From The Demolition Of The Driveways To The Property Owners; 5) Dismantling Concrete Curbs And Edges Along With The Footing And Concrete Ballast, With Removal From The Construction Site And Disposal At The Contractors Expense; 6) Dismantling The Bus Shelter Along With The Foundations (Shelter To Be Reassembled); 7) Demolition Of Culverts Under Exits With Material Management By The Contractor; 8) Dismantling Road Sign Posts And Shields (Posts For The Ordering Party); 9) Milling Of Road Markings In Accordance With The Sor Amendment Project; 10) Excavation (Including Removal Of A Layer Of Fertile Soil With An Average Thickness Of 25 Cm) And Removal Of Excess Soil Outside The Construction Site; 11) Carrying Out Excavations With Displacement Into The Embankment; 12) Construction Of Embankments With Material Delivered From Outside The Construction Site; 13) Construction Of Pipe Culverts Diameter 40 On A Bench Made Of Mechanically Stabilized Crushed Aggregate 0/31.5 Mm Thick. 20Cm; 14) Construction Of A Covered Ditch From Pipes Diameter 40 On A Bench Made Of Mechanically Stabilized Crushed Aggregate 0/31.5 Mm Thick. 20Cm; 15) Construction Of An Inspection Well Diameter 1000 With A Cover Class D400; 16) Construction Of A Riverbed Along With Profiling And Compaction Of The Subsoil For The Construction Of A Pedestrian Road, Exits, Culverts And A Covered Ditch; 17) Construction Of A Frost-Protective Layer Of Cbgm Class C1.5/2, 10 Cm Thick, Under The Slope Surface; 18) Construction Of A Base Made Of Mechanically Stabilized Crushed Aggregate With Continuous Grain Size 0/31.5 Mm C90/3 For The Surface Of The Road For Pedestrians And Exits, For Culverts And A Covered Ditch; 19) Placing A Palisade Made Of Concrete Elements 15X20x70 Cm On A Concrete Bench; 20) Placing A Palisade Made Of Concrete Elements 15X20x40 Cm On A Concrete Bench; 21) Placing Concrete Curbs 20X22cm, 20X30cm On A Concrete Bench With C12/15 Concrete Support; 22) Placing 8X30 Concrete Edges On A Concrete Bench With C12/15 Concrete Support; 23) Placing Concrete Retainers 12X25cm On A Concrete Footing With A C12/15 Concrete Stop; 24) Construction Of Roadside Surfaces At Exits And Partially Along The Road From Mechanically Stabilized Crushed Aggregate With An Average Thickness Of 10 Cm After Compaction; 25) Construction Of A Surface With Dimensions Of 2Mx4mx0.6M From Yellow Concrete Elements With Studs At Pedestrian Crossings; 26) Setting Up The Shelter

Contact Information